This function is obsolete now that config-based functions are available.
The command-line parsing should not happen here but in the executable
that uses these functions.
Bug: webrtc:11005
Change-Id: I618d12503123e3e1fd6e572a045372c622043a75
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167860
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30421}
Also adding kHz factory function for Frequency class.
Bug: webrtc:9883
Change-Id: Ide44910d50eb9616de2bb0c66b8c62493d2be92e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167725
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Ali Tofigh <alito@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30416}
Currently, datagram transports must report identical transport
parameters in order to negotiate use of the datagram transport. This is
not strictly necessary, they just need parameters that fit some notion
of "compatability" (eg. both ends share some mutually-supported version
of the datagram protocol).
This change allows datagram transports to implement their own notion of
compatible transport parameters, by adding a
SetRemoteTransportParameters method to DatagramTransportInterface which
checks if the remote parameters are compatible with the local endpoint
and returns an error if they are not.
Bug: webrtc:9719
Change-Id: I166c787b468b89d9082d7e3c9995a6ed50a1650a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167741
Commit-Queue: Bjorn Mellem <mellem@webrtc.org>
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30412}
Since RTC_DCHECK was made constexpr compatible, we can now
make the unit classes fully constexpr.
Bug: webrtc:9883
Change-Id: I18973c2f318449869cf0bd45699c41be53fba806
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167722
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Ali Tofigh <alito@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30403}
This was an ICE configuration experiment added a couple years ago that did not end up being used.
Bug: webrtc:11316
Change-Id: Iafb7e1c4f7b4598815f045808dbf6e470172f119
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167680
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Qingsi Wang <qingsi@webrtc.org>
Commit-Queue: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30395}
When creating a NetEqController it can be useful to have access to a
webrtc::Clock*. Also, NetEqControllers should have access to the
contents of the sync buffer when making decisions.
Bug: webrtc:11005
Change-Id: I7fdba75ce661b2ace52458620a8c1f3c990e5ac2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167208
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30368}
This reverts commit 133bf2bd28596aab5c7684e0ea3da99b1fece77f.
Reason for revert: Breaks Chromium import due to flaky test in Chromium.
Original change's description:
> Reland "Distinguish between send and receive codecs"
>
> This reverts commit e57b266a20334e47f105a0bd777190ec8c6562e8.
>
> Reason for revert: Fixed negotiation of send-only clients.
>
> Original change's description:
> > Revert "Distinguish between send and receive codecs"
> >
> > This reverts commit c0f25cf762a6946666c812f7a3df3f0a7f98b38d.
> >
> > Reason for revert: breaks negotiation with send-only clients
> >
> > (webrtc_video_engine.cc:985): SetRecvParameters called with unsupported video codec: VideoCodec[96:H264]
> > (peer_connection.cc:6043): Failed to set local video description recv parameters. (INVALID_PARAMETER)
> > (peer_connection.cc:2591): Failed to set local offer sdp: Failed to set local video description recv parameters.
> >
> > Original change's description:
> > > Distinguish between send and receive codecs
> > >
> > > Even though send and receive codecs may be the same, they might have
> > > different support in HW. Distinguish between send and receive codecs
> > > to be able to keep track of which codecs have HW support.
> > >
> > > Bug: chromium:1029737
> > > Change-Id: Id119560becadfe0aaf861c892a6485f1c2eb378d
> > > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165763
> > > Commit-Queue: Johannes Kron <kron@webrtc.org>
> > > Reviewed-by: Steve Anton <steveanton@webrtc.org>
> > > Cr-Commit-Position: refs/heads/master@{#30284}
> >
> > TBR=steveanton@webrtc.org,kron@webrtc.org
> >
> > Change-Id: Iacb7059436b2313b52577b65f164ee363c4816aa
> > No-Presubmit: true
> > No-Tree-Checks: true
> > No-Try: true
> > Bug: chromium:1029737
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166420
> > Reviewed-by: Steve Anton <steveanton@webrtc.org>
> > Commit-Queue: Steve Anton <steveanton@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#30292}
>
> TBR=steveanton@webrtc.org,kron@webrtc.org
>
>
> Bug: chromium:1029737
> Change-Id: I287efcfdcd1c9a3f2c410aeec8fe26a84204d1fd
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166604
> Reviewed-by: Johannes Kron <kron@webrtc.org>
> Reviewed-by: Steve Anton <steveanton@webrtc.org>
> Commit-Queue: Johannes Kron <kron@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30348}
TBR=steveanton@webrtc.org,kron@webrtc.org
Change-Id: I9f8731309749e07ce7e651e1550ecfabddb1735f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:1029737
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167205
Reviewed-by: Johannes Kron <kron@webrtc.org>
Commit-Queue: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30360}
This commit enables developers to configure the "," delay value from
the WebRTC spec value of 2 seconds. This flexibility allows developers
to comply with existing WebRTC clients.
Bug: webrtc:11273
Change-Id: Ia94b99e041df882e2396d0926a8f4188afe55885
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165700
Commit-Queue: Steve Anton <steveanton@webrtc.org>
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30354}
This reverts commit e57b266a20334e47f105a0bd777190ec8c6562e8.
Reason for revert: Fixed negotiation of send-only clients.
Original change's description:
> Revert "Distinguish between send and receive codecs"
>
> This reverts commit c0f25cf762a6946666c812f7a3df3f0a7f98b38d.
>
> Reason for revert: breaks negotiation with send-only clients
>
> (webrtc_video_engine.cc:985): SetRecvParameters called with unsupported video codec: VideoCodec[96:H264]
> (peer_connection.cc:6043): Failed to set local video description recv parameters. (INVALID_PARAMETER)
> (peer_connection.cc:2591): Failed to set local offer sdp: Failed to set local video description recv parameters.
>
> Original change's description:
> > Distinguish between send and receive codecs
> >
> > Even though send and receive codecs may be the same, they might have
> > different support in HW. Distinguish between send and receive codecs
> > to be able to keep track of which codecs have HW support.
> >
> > Bug: chromium:1029737
> > Change-Id: Id119560becadfe0aaf861c892a6485f1c2eb378d
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165763
> > Commit-Queue: Johannes Kron <kron@webrtc.org>
> > Reviewed-by: Steve Anton <steveanton@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#30284}
>
> TBR=steveanton@webrtc.org,kron@webrtc.org
>
> Change-Id: Iacb7059436b2313b52577b65f164ee363c4816aa
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: chromium:1029737
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166420
> Reviewed-by: Steve Anton <steveanton@webrtc.org>
> Commit-Queue: Steve Anton <steveanton@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30292}
TBR=steveanton@webrtc.org,kron@webrtc.org
Bug: chromium:1029737
Change-Id: I287efcfdcd1c9a3f2c410aeec8fe26a84204d1fd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166604
Reviewed-by: Johannes Kron <kron@webrtc.org>
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Commit-Queue: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30348}
This makes it easier to maintain consistency between real time
and simulated time modes.
The RealTimeController is updated to use an explicit main thread,
this ensures that pending destruction tasks are run as the network
emulator goes out of scope.
Bug: webrtc:11255
Change-Id: Ie73ab778c78a68d7c58c0f857f14a8d8ac027c67
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166164
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30342}
This change clarifies the semantics of this field:
unset: Depends on context.
== 0: Invalid.
== 1: No temporal layering.
>= 2: Temporal layering.
We should try to remove the wrapping optional later.
Bug: webrtc:11297
Change-Id: Id765f2dc1d31a4ba3cd424978ac6054cd60152ea
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166528
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30336}
`gn format` recently [1] changed its formatting behavior
for deps, source, and a few other elements when they
are assigned (with =) single-element lists to be consistent
with the formatting of updates (with +=) with single-element.
Now that we've rolled in a GN binary with the change,
reformat all files so that people don't get presubmit
warnings due to this.
CL generated with:
$ git ls-files | grep BUILD.gn | xargs gn format
$ gn format build_overrides/build.gni
$ gn format build_overrides/gtest.gni
$ gn format modules/audio_coding/audio_coding.gni
$ gn format webrtc.gni
$ gn format .gn
Plus a few manual changes to add exceptions for
"public_deps" (after changing these lines the presubmit
started to complain).
[1] - https://gn-review.googlesource.com/c/gn/+/6860
Bug: webrtc:11302
Change-Id: Iac29d23c1618ebef925c972e2891cd9f4e8cd613
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166882
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30334}
This squashes together several input signals that were spread out
through several calls into a single method and calling place:
SetEncoderSettings(), invoked from ReconfigureEncoder(). This is added
to the abstract interface.
This makes the following methods obsolete which are removed:
- SetEncoder(): The VideoEncoder was only used for GetEncoderInfo();
the VideoEncoder::EncoderInfo is now part of the EncoderSettings.
- SetEncoderConfig(): The VideoEncoderConfig is part of
EncoderSettings. The config is used for its codec_type and
content_type enums.
- SetCodecMaxFrameRate(): The max frame rate was the same as
VideoCodec::maxFramerate. VideoCodec is now part of EncoderSettings.
There may be some overlap in information between EncoderConfig and
VideoCodec, but that is outside the scope of this CL, which only makes
sure to bundle encoder settings-like information into one input signal.
Bug: webrtc:11222
Change-Id: I67c49c49c0a859cb7d5051939a461593c695a789
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166602
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Evan Shrubsole <eshr@google.com>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30332}
The extension (and thus structures to carry it) are designed
in particular for client<->SFU link. Putting the structure into api
acknowledges it can be reused by SFU projects
Bug: webrtc:10342
Change-Id: I8ca1f5046abadf6aa16200443c4892e9a2a928b4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166467
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Björn Terelius <terelius@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30324}
This is a reland of 2a11b2451a4068746fa0c55fa210efd4a15e4423
There are no changes compared to the first attempt.
Original change's description:
> Enable using a custom NetEqFactory in simulations
>
> Bug: webrtc:11005
> Change-Id: I8a15f77953cbd3c29a75c7cfc77f926b138994b9
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165580
> Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30286}
TBR=kwiberg
Bug: webrtc:11005
Change-Id: I4aa377e05916bd23f8f63aece9d0e27731c80d3e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166465
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30319}
These constants describes how value should be put on the wire and thus
belong to the extension builder/writer class rather than extension value class
Bug: None
Change-Id: I65ca3923eddcc2e48563ad69b98356c159ad86be
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166461
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30305}
This changes the behavior for adding virtual transport overhead so it
doesn't change the size of the actual payload buffer, only the
calculated packet size.
Bug: webrtc:9883
Change-Id: I6e24598378c4dd6a591d36ca3b162e933ff4ef7c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/164523
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30298}
This is a reland of b70c5c5ce97e7dcf2e1d8453f5ea0639d4b60453
Original change's description:
> Using simulated rtc::Thread for peer connection scenario tests.
>
> Bug: webrtc:11255
> Change-Id: I5d29e997a7209ffc64595082358cca9b2115d07a
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165689
> Commit-Queue: Sebastian Jansson <srte@webrtc.org>
> Reviewed-by: Steve Anton <steveanton@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30258}
Bug: webrtc:11255
Change-Id: If65cd56b59158cebec5609407a721fbdb47cfd1b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166046
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30294}
This reverts commit c0f25cf762a6946666c812f7a3df3f0a7f98b38d.
Reason for revert: breaks negotiation with send-only clients
(webrtc_video_engine.cc:985): SetRecvParameters called with unsupported video codec: VideoCodec[96:H264]
(peer_connection.cc:6043): Failed to set local video description recv parameters. (INVALID_PARAMETER)
(peer_connection.cc:2591): Failed to set local offer sdp: Failed to set local video description recv parameters.
Original change's description:
> Distinguish between send and receive codecs
>
> Even though send and receive codecs may be the same, they might have
> different support in HW. Distinguish between send and receive codecs
> to be able to keep track of which codecs have HW support.
>
> Bug: chromium:1029737
> Change-Id: Id119560becadfe0aaf861c892a6485f1c2eb378d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165763
> Commit-Queue: Johannes Kron <kron@webrtc.org>
> Reviewed-by: Steve Anton <steveanton@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30284}
TBR=steveanton@webrtc.org,kron@webrtc.org
Change-Id: Iacb7059436b2313b52577b65f164ee363c4816aa
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:1029737
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166420
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Commit-Queue: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30292}
Even though send and receive codecs may be the same, they might have
different support in HW. Distinguish between send and receive codecs
to be able to keep track of which codecs have HW support.
Bug: chromium:1029737
Change-Id: Id119560becadfe0aaf861c892a6485f1c2eb378d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165763
Commit-Queue: Johannes Kron <kron@webrtc.org>
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30284}
This patch improves handshake wrt GOOG_PING support so that
- if goog_ping_enable: sender send it's goog-ping version until it gets
STUN_BINDING_RESPONSE
- receiver only sends it's goog-ping-version if getting a
goog-ping-version in the request
This means that the overhead of STUN_ATTR_GOOG_MISC_INFO is only
- added on STUN_BINDING_REQUEST until a response is received.
- added on STUN_BINDING_RESPONSE if remote peer request it.
This is wire compatible with older versions so that
- new sender will enable GOOG_PING with new/old receiver.
- old sender will enable GOOG_PING with old receiver.
- old version will not enable GOOG_PING with new receiver
(receiver expecting sender to announce first).
BUG: webrtc:11100
Change-Id: Ib3434c593988188150f4c7506918139aaf138d0c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165787
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Commit-Queue: Jonas Oreland <jonaso@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30269}
This reverts commit b0e0728159f07269a875c5b53658603cf6733480.
Reason for revert:
Causes Chromium tests to timeout, preventing rolls into Chromium.
Original change's description:
> Replaces SynchronousMethodCall with rtc::Thread::Invoke.
>
> Given that we already have Thread:.Invoke that can be used with lambda,
> SynchronousMethodCall doesn't add any value.
>
> This simplification prepares for simulated time peer connection tests.
>
> Bug: webrtc:11255
> Change-Id: I478a11f15e30e009dae4a3fee2120f6d7a03355f
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165683
> Commit-Queue: Sebastian Jansson <srte@webrtc.org>
> Reviewed-by: Steve Anton <steveanton@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30217}
TBR=steveanton@webrtc.org,srte@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:11255
Change-Id: I9d3aa218013129db7a09a77500a0547ce9ae341a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166047
Reviewed-by: Guido Urdaneta <guidou@webrtc.org>
Commit-Queue: Guido Urdaneta <guidou@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30265}
This CL was generated by running:
git ls-files | grep ".cc" | xargs perl -i -ne 'BEGIN {undef $/}; s/("[\s\n]*<<[\s\n]*")/" "/g; print;'; git cl format
After that I manually edited modules/audio_processing/gain_controller2.cc to preserve its original
formatting.
This primary benefit of this change is a small reduction in binary size.
Bug: None
Change-Id: I689fa7ba9c717c314bb167e5d592c3c4e0871e29
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165961
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Jonas Olsson <jonasolsson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30251}
Given that we already have Thread:.Invoke that can be used with lambda,
SynchronousMethodCall doesn't add any value.
This simplification prepares for simulated time peer connection tests.
Bug: webrtc:11255
Change-Id: I478a11f15e30e009dae4a3fee2120f6d7a03355f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165683
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30217}
This is part of a CL series merging rtc::MessageQueue into rtc::Thread.
Bug: webrtc:9883
Change-Id: I3cb857cc707d5e897759366d1478cc1ec19bce9a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165344
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30180}
