This poison guards against accidental use of EnvironmentFactory and thus ensures low level WebRTC class would use utilities from propagated environment instead of accidentally using a default implementation.
This poison extends and thus replaces default task queue poison.
Bug: webrtc:15656
Change-Id: I577bef8af08b9c7dd649ad5a2284eb236e6f4a8f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/328380
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#41247}
kDefaultQpMax=56 was defined in multiple places. Move it to media_constants and split it into two: VPx/AV1 and H26x values. H26x value is set to 51 which is the max bitstream QP value for H264/5.
This CL is expected to be a no-op because:
1. VideoCodec::qpMax value has not changed for VP8/9 and AV1.
2. VideoCodec::qpMax is currently not used by OpenH264 wrapper (wiring it up is out-of-scope of this CL).
3. Previous default qpMax=56 exceeded the max value for H26x (=51). External HW H26x encoders likely clamped it and used 51.
Bug: webrtc:14852
Change-Id: I1d795e695dac5c78e86ed829b24281e61066f668
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/324282
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#40997}
Convert most field trials used in PCLF tests.
Change-Id: I26c0c4b1164bb0870aae1a488942cde888cb459d
Bug: webrtc:10335
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/322703
Commit-Queue: Jeremy Leconte <jleconte@google.com>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Jonas Oreland <jonaso@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#40909}
This allows to remove some calls to CreateMediaChannel
in the RtpTransceiver code.
This removes the fake engines owning the channels and moves
the responsibility to the tests themselves as it's quite
hard to both return a unique_ptr to a channel and still own it.
The various channel getters from the fake engine are thus
also removed and tests updated accordingly, the channel is
retrieved from internal structs in the tests by going
through the RtpTransceiver objects as it's not possible to
safely get the channels from only a sender or receiver.
As some tests are running in both PlanB and Unified Plan,
getting a transceiver is not working for PlanB. As PlanB
has been deprecated and will eventually be removed,
the problematic tests have either been removed or updated
to only run with Unified Plan.
Bug: webrtc:13931
Change-Id: I0571beca8b9ef2f2089d500802b7b124268d9de3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/310340
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Florent Castelli <orphis@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#40366}
specified in https://github.com/w3c/webrtc-stats/pull/762
and take FlexFEC into account for receive statistics.
BUG=webrtc:15250
Change-Id: Id85775ab1f29487d5b8bf478da6e22071005901a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/294881
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Philipp Hancke <phancke@microsoft.com>
Cr-Commit-Position: refs/heads/main@{#40325}
This ensures that the MediaChannel interface is only implemented
through a send/receive shim, splitting channels also when kBoth is
used.
Bug: webrtc:13931
Change-Id: Ie97809597eaae7b4f504939339795432c34e56cb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/307461
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#40210}
The intent is that this object can be used instead of VideoMediaChannel,
clearing the way for decomposing VideoMediaChannel into send and
receive classes.
This CL uses it for the "both" role of WebRtcVideoEngine::CreateMediaChannel; a later CL will use it for all roles on all engines.
Bug: webrtc:13931
Change-Id: Ibd0ca2c3c45b5e3bfcced8f7e30a1edd63cf7654
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/306720
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#40173}
This makes the handling somewhat more uniform, and is the same
for both video and audio channels.
Bug: webrtc:13931
Change-Id: I26605c56e069e8a34e03708d45eb27a6b7492130
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/306100
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#40107}
This avoids a couple of layers of error code conversion, reduces
dependency on cricket error types and allows us to preserve error
information from dcsctp. Along the way remove SendDataResult.
Bug: none
Change-Id: I1ad18a8f0b2fb181745b19c49f36f270708720c0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/298305
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Tomas Gunnarsson <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39619}
Because the adapter has a passthrough mode, it can already handle both
singlecast and simulcast cases, meaning the proxy is no longer providing
value. Let's delete.
Bug: webrtc:15001
Change-Id: I480eaba599448e9b82b8cf7f829dc35ad6ce0434
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/297740
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39579}
This is done by allowing implementations of AudioDeviceModule to
implement the GetStats() method. The default implementation returns
nullopt, in which case RTCAudioPlayoutStats will not be visible in the
stats.
Bug: webrtc:14653
Change-Id: I8e4aa6f1b8fcfa47a30f633d28a4013191752e20
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/290563
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Fredrik Hernqvist <fhernqvist@google.com>
Reviewed-by: Henrik Andreassson <henrika@webrtc.org>
Reviewed-by: Olga Sharonova <olka@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39115}
Fallback to a default value if the scalability mode is unset or not supported by the codec.
The fallback logic is only enabled if the scalability mode is configured for any of the encodings for now (i.e. initial default values are not set).
Bug: webrtc:11607
Change-Id: Ie632767b627a1dbbef71c59f9340573daf386c14
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/287600
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Florent Castelli <orphis@webrtc.org>
Commit-Queue: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39074}
With this cl, a packet is only parsed once in RtpTransport::DemuxPacket and the metadata is reused.
Extensions are still identified twice- one for demuxing based on mid. The second time in Channel::OnReceivedPacket in order to use extensions specific to that mid.
Bug: webrtc:7135, webrtc:14795
Change-Id: I50e3814af92ca4378f148876b20a54bcfac1e146
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/290540
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Per Kjellander <perkj@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39058}
This is done in peparation for using these methods in the engines.
Bug: webrtc:7135, webrtc:14795
Change-Id: I1255c035437d31398327318c3dbd73e70a11a5cd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/290577
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Per Kjellander <perkj@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39044}
Keeping the headers to allow compatibility with current users
that expect the headers to be in that target before they are
also updated.
Bug: webrtc:9838
Change-Id: I8b1e88850958e92c043686587a37791f01860220
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/290569
Commit-Queue: Florent Castelli <orphis@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Auto-Submit: Florent Castelli <orphis@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39031}
This CL removes a couple more opportunities for client code
to interact directly with the MediaChannel implementation classes.
No-try because of infra failure.
No-Try: true
Bug: webrtc:13931
Change-Id: I658b8b04eff11de7831a1933d16d40fc59c3f0fc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288380
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38935}
This helps in figuring out which dependencies exist, and gets closer
to obeying the "one target per .cc file" rule.
Test failures seem unrelated, so using No-Try.
No-Try: true
Bug: webrtc:14775
Change-Id: Id25466c8b8fe628d05c819cf7c69ae6d8421c6cf
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288020
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38910}
This detaches the implementation (which is still merged)
from the objects used to interface to it.
Bug: webrtc:13931
Change-Id: I872ee10e4ed9fa432bfa231f723af1d3989d79d4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288080
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38906}
The implementation here has a number of changes that force the callers
that called the "channel" functions into specific interfaces rather than
just letting C++ take care of it; this should go away once there stops
being a common implementation class for those interfaces.
Bug: webrtc:13931
Change-Id: Ic4e279528a341bc0a0e88d2e1e76c90bc43a1035
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/287640
Reviewed-by: Florent Castelli <orphis@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38888}
This is in the webrtc-stats spec at
https://www.w3.org/TR/webrtc-stats/#dom-rtcoutboundrtpstreamstats-scalabilitymode.
This adds the scalability mode to CodecSpecificInfo which is used to
plumb the modes for each simulcast layer.
TBR=orphis@webrtc.org
Tested: Compiled into Chrome and confirmed the scalability mode set for AV1, VP9, VP8 and H264 software encoders in chrome://webrtc-internals.
Bug: webrtc:14730
Change-Id: I71ceba8f6485a4f4a73e0856031b8d5f16f913f2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/285085
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38847}
This will result in using a default value instead.
The crash is caused by configuring audio send stream with a non-positive max_bitrate_bps and it expects a positive value (or special value -1).
Also remove support for setting min bitrate since it is not in the spec and there are no tests.
Bug: chromium:1377286
Change-Id: I19af29bff79eda5c0fbb1e528fced7976f5c2511
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/284640
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38719}
As the synchronous version only posts a task to recreate the encoder
later, it is not possible to catch errors and state changes that
could appear then.
The asynchronous version of SetParameters() aims to solve this by
providing a callback to wait for the completion of the encoder
reconfiguration, allowing any error to be propagate and subsequent
getParameters() call to have up to date information.
Bug: webrtc:11607
Change-Id: I5548e75aa14a97f8d9c0c94df1e72e9cd40887b2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/278420
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Florent Castelli <orphis@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38627}
Also run IWYU on a file picked for testing and check in the result.
Bug: none
Change-Id: Ide36bc59d126064f2bab7af441f72a6e8477c848
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/280601
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Florent Castelli <orphis@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38481}
This patch
1) modifies VideoAdapter to use requested_resolution
instead on OnOutputFormatRequest, iff there are no active encoders
that is not using requested_resolution (i.e all "old" encoder(s) are
not active).
2) modifies VideoBroadcaster to not broadcast wants from
encoders that are not active (iff there is an active encoder
using requested_resolution).
3) fixes a bug in encoder_stream_factor in that the
requested_resolution was not propagated to return value
(must have been lost in merge?).
Bug: webrtc:14451
Change-Id: I00e0907f0fe9329141ed169576fa46cdc5384886
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/278360
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Jonas Oreland <jonaso@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38323}
This cl move VideoEncoderConfig from api/ to video/config.
VideoStreamEncoderInterface and VideoStreamEncoderObserver
are moved as collateral.
brandt@ think that the reason these were in api/ in the
first place had to downstream project.
Functionality wise, this is a NOP, but it makes it easier
to modify the encoder (config).
Bug: webrtc:14451
Change-Id: I2610d815aeb186298498e7102cac773ecac8cd36
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/277002
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Jonas Oreland <jonaso@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38242}
This cl/ changes so that the EncoderStreamFactory is
not created inside WebRtcVideoSendStream (webrtc_video_engine).
The benifit of this is that the VideoStreamEncoder can then
amend the EncoderStreamFactory with state (and types)
w/o exposing it in VideoEncoderConfig.
I.e as an alternative to changes done inside
https://webrtc-review.googlesource.com/c/src/+/276742.
The fake_webrtc_call is modified to (if needed) create
it's own EncoderStreamFactory if needed.
Note: this cl/ will have to be merged with with
https://webrtc-review.googlesource.com/c/src/+/277002.
Bug: webrtc:14451
Change-Id: I3d896b227d39725ba6409622e8d09d14bd45d5fe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/277160
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Jonas Oreland <jonaso@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38237}
This cl/ is a NOP refactoring,
moving the EncoderStreamFactory from within webrtc_video_engine.cc
into own file in video/. simulcast.cc is collateral.
Bug: webrtc:14451
Change-Id: Ia69b9241d8cd8a12be6628d887701f2e244c07cc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/276861
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Jonas Oreland <jonaso@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38224}
This is a reland of commit 3afb8e24311dc1297150d4011894b6cb00841735
Patchset 1 is the original CL. Patchset 2 contains a fix:
Depending on call site, the number of spatial layers for VP9 might be
signalled in three different ways. One of them was afaict only used in
out perf tests, and resulted in the max bitrate being incorrectly
capped.
The fix now checks that field too.
Original change's description:
> When VP9 SVC is used, use SvcConfig to set max bitrate for the stream.
>
> Currently, a default max bitrate is determined within WebRtcVideoEngine,
> which maxes out at 2.5Mbps - and that limits the max bitrate deteremined
> by SvcConfig for resolutions above 720p.
>
> This does not affect simulcast, as WebRtcVideoEngine already knows to
> trust the rate allocation in simulcast.cc instead.
>
> Bug: webrtc:14017
> Change-Id: I0c310a6fd496e9e5a10eae45838900068aa1ae2d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/267160
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Cr-Commit-Position: refs/heads/main@{#37370}
Bug: webrtc:14017, webrtc:14234
Change-Id: Idcaf4321a20c917e4049522c577336ddcfc7ffbb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/267860
Auto-Submit: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37446}
Also move ScalabilityModeToString to api and add RTC_EXPORT so that
Chromium can use it.
Bug: chromium:986069
Change-Id: I5dbbb6de9b14ca20f3ae0630552dcd44595ad5ef
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/267780
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Daniel.L (Byoungchan) Lee <daniel.l@hpcnt.com>
Cr-Commit-Position: refs/heads/main@{#37444}
This reverts commit 3afb8e24311dc1297150d4011894b6cb00841735.
Reason for revert: Causes some unexpected perf regressions.
Original change's description:
> When VP9 SVC is used, use SvcConfig to set max bitrate for the stream.
>
> Currently, a default max bitrate is determined within WebRtcVideoEngine,
> which maxes out at 2.5Mbps - and that limits the max bitrate deteremined
> by SvcConfig for resolutions above 720p.
>
> This does not affect simulcast, as WebRtcVideoEngine already knows to
> trust the rate allocation in simulcast.cc instead.
>
> Bug: webrtc:14017
> Change-Id: I0c310a6fd496e9e5a10eae45838900068aa1ae2d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/267160
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Cr-Commit-Position: refs/heads/main@{#37370}
Bug: webrtc:14017
Change-Id: I1e45ee3f78deb50a9057d648146b1a6360782aa3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/267800
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Bot-Commit: rubber-stamper@appspot.gserviceaccount.com <rubber-stamper@appspot.gserviceaccount.com>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Auto-Submit: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37438}
Currently, a default max bitrate is determined within WebRtcVideoEngine,
which maxes out at 2.5Mbps - and that limits the max bitrate deteremined
by SvcConfig for resolutions above 720p.
This does not affect simulcast, as WebRtcVideoEngine already knows to
trust the rate allocation in simulcast.cc instead.
Bug: webrtc:14017
Change-Id: I0c310a6fd496e9e5a10eae45838900068aa1ae2d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/267160
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37370}
