Some hardware H.264 encoders does not place average QP delta in
slice_qp_delta field. Adding an optional flag in EncoderInfo to notify
quality scaler about this.
Bug: webrtc:12942
Change-Id: I3ee29c5ae9bd7bb34d26eba7e6bede3798ca44b4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/226921
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#34627}
This reverts commit 31c5c9da35209fe65ed15cb3a804823cd2789259.
Reason for revert: made QP parser thread-safe https://webrtc.googlesource.com/src/+/0e42cf703bd111fde235d06d08b02d3a7b02c727
Original change's description:
> Revert "Reland "Enable quality scaling when allowed""
>
> This reverts commit 0021fe77937f386e6021a5451e3b0d78d7950815.
>
> Reason for revert: Broken on linux_tsan bot: https://ci.chromium.org/ui/p/webrtc/builders/ci/Linux%20Tsan%20v2/25329/overview
>
> Original change's description:
> > Reland "Enable quality scaling when allowed"
> >
> > This reverts commit eb449a979bc561a8b256cca434e582f3889375e2.
> >
> > Reason for revert: Added QP parsing in https://webrtc.googlesource.com/src/+/8639673f0c098efc294a7593fa3bd98e28ab7508
> >
> > Original change's description:
> > Before this CL quality scaling was conditioned on scaling settings
> > provided by encoder. That should not be a requirement since encoder
> > may not be aware of quality scaling which is a WebRTC feature. In M90
> > chromium HW encoders do not provide scaling settings (chromium:1179020).
> > The default scaling settings provided by these encoders are not correct
> > (b/181537172).
> >
> > This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
> > is set to true in singlecast with normal video feed (not screen sharing)
> > mode. If quality scaling is allowed it is enabled no matter whether
> > scaling settings are present in encoder info or not. Setting from
> > QualityScalingExperiment are used in case if not provided by encoder.
> >
> > Bug: chromium:1179020
> > Bug: webrtc:12511
> > Change-Id: I97911fde9005ec25028a640a3f007d12f2bbc2e5
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211349
> > Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> > Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> > Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#33438}
>
> TBR=brandtr@webrtc.org,ilnik@webrtc.org,ssilkin@webrtc.org,rubber-stamper@appspot.gserviceaccount.com
>
> Change-Id: Id7633a1e98f95762e81487887f83a0c35f89195c
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: chromium:1179020
> Bug: webrtc:12511
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211352
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#33439}
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: I3a31e1c1fdf7da93226f8c1e0a96b43fe0b786df
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/212026
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33481}
This reverts commit 0021fe77937f386e6021a5451e3b0d78d7950815.
Reason for revert: Broken on linux_tsan bot: https://ci.chromium.org/ui/p/webrtc/builders/ci/Linux%20Tsan%20v2/25329/overview
Original change's description:
> Reland "Enable quality scaling when allowed"
>
> This reverts commit eb449a979bc561a8b256cca434e582f3889375e2.
>
> Reason for revert: Added QP parsing in https://webrtc.googlesource.com/src/+/8639673f0c098efc294a7593fa3bd98e28ab7508
>
> Original change's description:
> Before this CL quality scaling was conditioned on scaling settings
> provided by encoder. That should not be a requirement since encoder
> may not be aware of quality scaling which is a WebRTC feature. In M90
> chromium HW encoders do not provide scaling settings (chromium:1179020).
> The default scaling settings provided by these encoders are not correct
> (b/181537172).
>
> This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
> is set to true in singlecast with normal video feed (not screen sharing)
> mode. If quality scaling is allowed it is enabled no matter whether
> scaling settings are present in encoder info or not. Setting from
> QualityScalingExperiment are used in case if not provided by encoder.
>
> Bug: chromium:1179020
> Bug: webrtc:12511
> Change-Id: I97911fde9005ec25028a640a3f007d12f2bbc2e5
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211349
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#33438}
TBR=brandtr@webrtc.org,ilnik@webrtc.org,ssilkin@webrtc.org,rubber-stamper@appspot.gserviceaccount.com
Change-Id: Id7633a1e98f95762e81487887f83a0c35f89195c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:1179020
Bug: webrtc:12511
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211352
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33439}
This reverts commit eb449a979bc561a8b256cca434e582f3889375e2.
Reason for revert: Added QP parsing in https://webrtc.googlesource.com/src/+/8639673f0c098efc294a7593fa3bd98e28ab7508
Original change's description:
Before this CL quality scaling was conditioned on scaling settings
provided by encoder. That should not be a requirement since encoder
may not be aware of quality scaling which is a WebRTC feature. In M90
chromium HW encoders do not provide scaling settings (chromium:1179020).
The default scaling settings provided by these encoders are not correct
(b/181537172).
This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
is set to true in singlecast with normal video feed (not screen sharing)
mode. If quality scaling is allowed it is enabled no matter whether
scaling settings are present in encoder info or not. Setting from
QualityScalingExperiment are used in case if not provided by encoder.
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: I97911fde9005ec25028a640a3f007d12f2bbc2e5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211349
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33438}
This reverts commit 83be84bb74133343358bba22e4e5106ecc385721.
Reason for revert: Suspect of crbug.com/1185276
Original change's description:
> Reland "Enable quality scaling when allowed"
>
> This reverts commit 609b524dd3ff36719b5c4470b85d37dcdadfb1f8.
>
> Reason for revert: Disable QualityScalingAllowed_QualityScalingEnabled on iOS.
>
> Original change's description:
> Before this CL quality scaling was conditioned on scaling settings
> provided by encoder. That should not be a requirement since encoder
> may not be aware of quality scaling which is a WebRTC feature. In M90
> chromium HW encoders do not provide scaling settings (chromium:1179020).
> The default scaling settings provided by these encoders are not correct
> (b/181537172).
>
> This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
> is set to true in singlecast with normal video feed (not screen sharing)
> mode. If quality scaling is allowed it is enabled no matter whether
> scaling settings are present in encoder info or not. Setting from
> QualityScalingExperiment are used in case if not provided by encoder.
>
> Bug: chromium:1179020
> Bug: webrtc:12511
> Change-Id: Ia0923e5a62acdfdeb06f9aad5d670be8a0f8d746
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209643
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Åsa Persson <asapersson@webrtc.org>
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#33385}
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: I7004014c5936176f8c125aeb55da91ce095b266e
TBR: ssilkin@webrtc.org
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209708
Reviewed-by: Guido Urdaneta <guidou@webrtc.org>
Commit-Queue: Guido Urdaneta <guidou@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33393}
It read from simulcast_layers[0] even if vector is empty.
Bug: none
Change-Id: I293890feda70022beae4247ab10cf8182b4cf4a5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209706
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33391}
This reverts commit 609b524dd3ff36719b5c4470b85d37dcdadfb1f8.
Reason for revert: Disable QualityScalingAllowed_QualityScalingEnabled on iOS.
Original change's description:
Before this CL quality scaling was conditioned on scaling settings
provided by encoder. That should not be a requirement since encoder
may not be aware of quality scaling which is a WebRTC feature. In M90
chromium HW encoders do not provide scaling settings (chromium:1179020).
The default scaling settings provided by these encoders are not correct
(b/181537172).
This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
is set to true in singlecast with normal video feed (not screen sharing)
mode. If quality scaling is allowed it is enabled no matter whether
scaling settings are present in encoder info or not. Setting from
QualityScalingExperiment are used in case if not provided by encoder.
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: Ia0923e5a62acdfdeb06f9aad5d670be8a0f8d746
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209643
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33385}
This reverts commit 752cbaba907de077e5f1b24a232e71feb479dccb.
Reason for revert: The test VideoStreamEncoderTest.QualityScalingAllowed_QualityScalingEnabled seems to fail on iOS.
Original change's description:
> Enable quality scaling when allowed
>
> Before this CL quality scaling was conditioned on scaling settings
> provided by encoder. That should not be a requirement since encoder
> may not be aware of quality scaling which is a WebRTC feature. In M90
> chromium HW encoders do not provide scaling settings (chromium:1179020).
> The default scaling settings provided by these encoders are not correct
> (b/181537172).
>
> This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
> is set to true in singlecast with normal video feed (not screen sharing)
> mode. If quality scaling is allowed it is enabled no matter whether
> scaling settings are present in encoder info or not. Setting from
> QualityScalingExperiment are used in case if not provided by encoder.
>
> Bug: chromium:1179020, webrtc:12511
> Change-Id: I83d55319ce4b9f4fb143187ced94a16a778b4de3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209184
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Åsa Persson <asapersson@webrtc.org>
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#33373}
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: Icabf2d9a034d359f79491f2c37f1044f17a7445d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209641
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Björn Terelius <terelius@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33381}
Before this CL quality scaling was conditioned on scaling settings
provided by encoder. That should not be a requirement since encoder
may not be aware of quality scaling which is a WebRTC feature. In M90
chromium HW encoders do not provide scaling settings (chromium:1179020).
The default scaling settings provided by these encoders are not correct
(b/181537172).
This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
is set to true in singlecast with normal video feed (not screen sharing)
mode. If quality scaling is allowed it is enabled no matter whether
scaling settings are present in encoder info or not. Setting from
QualityScalingExperiment are used in case if not provided by encoder.
Bug: chromium:1179020, webrtc:12511
Change-Id: I83d55319ce4b9f4fb143187ced94a16a778b4de3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209184
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33373}
Simulcast with one active stream:
Use pixels from single active stream if set (instead of input stream which could be larger) to avoid going below the min_pixel_per_frame limit when downgrading resolution.
Bug: none
Change-Id: I65acb12cc53e46f726ccb5bfab8ce08ff0c4cf78
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/208101
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33309}
Use bandwidth allocation instead of encoder target bitrate in DropDueToSize when incoming resolution increases to avoid downgrades due to target bitrate being limited by the max bitrate at low resolutions.
Bug: none
Change-Id: Ic41b31c1a86911d4e97b61b0cbc41ce0da739bd4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/205622
Commit-Queue: Åsa Persson <asapersson@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33168}
This could potentially lead to unnecessary restarts since it is also
started after the encoder is created. However, it is needed since the
hardware acceleration support can change even though the encoder has
not been recreated.
Bug: b/145730598
Change-Id: Iad1330e7c7bdf769a68c4ecf7abb6abbf3a4fe71
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/203140
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33060}
This CL implements a Resource that aggressively reports overuse or
underuse until the encoded stream has the max pixels specified. The
pixel limit is controlled with a field trial, e.g:
--force-fieldtrials="WebRTC-PixelLimitResource/Enabled-307200/"
This caps the resolution to 307200 (=640x480). This can be used by the
TestBed to simulate being CPU limited. Note that the resource doesn't
care about degradation preference at the moment, so if the degradation
preference would be set to "maintain-resolution" the PixelLimitResource
would never stop reporting overuse and we would quickly get a low-FPS
stream.
PixelLimitResource runs a repeating task and reports overuse, underuse
or neither every 5 seconds. This ensures we quickly reach the desired
resolution.
Unit tests are added. I did not add any integration tests (I think
that's overkill for a testing-only resource) but I have manually
verified that this works as intended.
This CL also moves the FakeVideoStreamInputStateProvider into a test/
folder and exposes video_stream_adapter.cc's GetLowerResolutionThan().
Bug: webrtc:12261
Change-Id: Ifbf7c4c05e9dd2843543589bebef3f49b18c38c0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/195600
Reviewed-by: Evan Shrubsole <eshr@google.com>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32771}
External reasons here are simulcast configuration and
source resolution change.
Initial frame dropper should be enabled in these cases because the
client can request way too big resolution for available bitrate and
usual quality scaling would take too long.
Bug: none
Change-Id: I02fbbd3c15b53b39672c083c2a1f9a780256c507
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/195004
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32707}
This is a reland of f5e261aaf65cdf2eb903cdf40d651846be44f447
This CL disables RTC_NO_UNIQUE_ADDRESS on MSan builds since
there have been some issues.
Original change's description:
> Introduce RTC_NO_UNIQUE_ADDRESS.
>
> This macro introduces the possibility to suggest the compiler that a
> data member doesn't need an address different from other non static
> data members.
>
> The usage of a macro is to maintain portability since at the moment
> the attribute [[no_unique_address]] is only supported by clang
> with at least -std=c++11 but it should be supported by all the
> compilers starting from C++20.
>
> Bug: webrtc:11495
> Change-Id: I9f12b67b4422a2749649eaa6b004a67d5fd572d8
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/173331
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32246}
Bug: webrtc:11495, webrtc:12218
Change-Id: I4e6c7cc37d3daffad2407c9a2acfa897fa5b426a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/189968
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32668}
And use it in a few places that were using RTC_CHECK(false) or FATAL()
to do the exact same job. There should be no change in behavior.
Bug: none
Change-Id: I36d5e6bcf35fd41534e08a8c879fa0811b4f1967
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/191963
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32567}
"warning: control reaches end of non-void function [-Wreturn-type]"
Reported by gcc (8.3)
In all the reported cases, the end of function is never actually
reached. Add RTC_CHECK(false) to ensure the compiler is aware that
this path is a dead-end.
Bug: webrtc:12008
Change-Id: I7f816fde3d1897ed2774057c7e05da66e1895e60
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/189784
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Fabien VALLÉE <fabien.vallee@netgem.com>
Cr-Commit-Position: refs/heads/master@{#32503}
(Reland with no changes after the fix to the downstream project)
This can be overriden for kNative frame types to perform scaling efficiently.
Default implementations for existing buffer types require actual
buffer implementation, thus this CL also merges "video_frame"
with "video_frame_I420" build targets.
Originally Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186303
(Landing with TBR as it's unchaged reland of already approved CL)
TBR=nisse@webrtc.org,sakal@webrtc.org
Bug: webrtc:11976, chromium:1132299
Change-Id: Ia23f7d3e474bd9cdc177104cc5c6d772f04b210f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/187345
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32362}
This reverts commit f5e261aaf65cdf2eb903cdf40d651846be44f447.
Reason for revert: Breaks downstream projects.
Original change's description:
> Introduce RTC_NO_UNIQUE_ADDRESS.
>
> This macro introduces the possibility to suggest the compiler that a
> data member doesn't need an address different from other non static
> data members.
>
> The usage of a macro is to maintain portability since at the moment
> the attribute [[no_unique_address]] is only supported by clang
> with at least -std=c++11 but it should be supported by all the
> compilers starting from C++20.
>
> Bug: webrtc:11495
> Change-Id: I9f12b67b4422a2749649eaa6b004a67d5fd572d8
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/173331
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32246}
TBR=mbonadei@webrtc.org,kwiberg@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:11495
Change-Id: Ice318d1b11ca3dff09c190187a0b0a32ca945fe3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186944
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32335}
This macro introduces the possibility to suggest the compiler that a
data member doesn't need an address different from other non static
data members.
The usage of a macro is to maintain portability since at the moment
the attribute [[no_unique_address]] is only supported by clang
with at least -std=c++11 but it should be supported by all the
compilers starting from C++20.
Bug: webrtc:11495
Change-Id: I9f12b67b4422a2749649eaa6b004a67d5fd572d8
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/173331
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32246}
The former was unused, the latter is replaced with the explicit C++11
deletions. The related RTC_DISALLOW_COPY_AND_ASSIGN is left for now,
it is used in a lot more places.
Bug: None
Change-Id: I49503e7f2b9ff43c6285f8695833479bbc18c380
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185500
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32224}
This is a reland of ba8abbb630cdd9d05e22c830d0845e920762850d
This can be relanded as the queuing issues that were causing a
crash in the WebRTC roll in Chromium have been resolved. I have
added the Chromium failing targets to the CQ for this commit and
they have succeeded.
Original change's description:
> [Adaptation] Remove QualityScalerResource when disabled.
>
> Bug: webrtc:11843
> Change-Id: I2d3e40356c266f189db0242f3c7590e6d83e4456
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181369
> Commit-Queue: Evan Shrubsole <eshr@google.com>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#31924}
Bug: webrtc:11843
Change-Id: I228331293060ef996f1dd7f8e18d52b0818f526b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/182080
Commit-Queue: Evan Shrubsole <eshr@google.com>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31996}
Resource adaptation needs refactoring for async adaptations. For now
the resource adaptation processor can work on the encoder thread, until
it is refactored to support async adaptation.
Bug: webrtc:11867
Change-Id: I9c46da356db19c0fd52748c999ccb216f2ca923b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/182040
Commit-Queue: Evan Shrubsole <eshr@google.com>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31991}
There was a small miss in https://webrtc-review.googlesource.com/c/src/+/181369
which allowed frame dropping to re-enable, and there was no test to catch this.
This case has been fixed along with a test to ensure this isn't missed in the future.
Bug: webrtc:11843
Change-Id: I201aa451d4751586c780a07dc72a7401aed78088
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181661
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@google.com>
Cr-Commit-Position: refs/heads/master@{#31936}
Some restrictions previously were preventing adaptation up caused by the quality resource. However, it makes sense to use the same restrictions in the case of other resources. This CL removes now unneeded wire-up of reason/resource causing adaptation.
Bug: webrtc:11771
Change-Id: Iec301a59d2a41d32d23b6be340f3b5637d697e52
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181580
Commit-Queue: Evan Shrubsole <eshr@google.com>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31926}
Instead it should be ensured that it is started with the correct config.
This removes confusion regarding a resource state. If the resource
check is stopped then the adaptations for that resource should be
removed, and there is no way to determine that if we have one method for
stop for both reconfigure and shutdown.
Bug: webrtc:11843
Change-Id: I491f2fd1f4f803a4610124c7b0026ad75ab4a9cc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181368
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@google.com>
Cr-Commit-Position: refs/heads/master@{#31913}
Since the degradation preference can be fetch from the thread safe
provider, this removed the need to have 2 queues.
Bug: None
Change-Id: I94cb8b7d3d2950acfe0ad0a6d46edc038ed8e286
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/177523
Commit-Queue: Evan Shrubsole <eshr@google.com>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31898}
It was not used by any class and all future uses can use the
VideoSourceRestrictionsListener.
Bug: webrtc:11834
Change-Id: I5c71b93cc503f458dce0ccdd78b91b5a1debc56d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181062
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@google.com>
Cr-Commit-Position: refs/heads/master@{#31896}
This way can double adapt right away instead of relying
on the qp scaler checking soon into the future.
Bug: webrtc:11830
Change-Id: I8e878168303cf6a4c3edcf3997dd8ac2413a4479
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181060
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@google.com>
Cr-Commit-Position: refs/heads/master@{#31895}
