webrtc_m130/modules/audio_processing/aec3/reverb_model_estimator.cc

/*
 *  Copyright (c) 2018 The WebRTC project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#include "modules/audio_processing/aec3/reverb_model_estimator.h"

#include <algorithm>
#include <array>
#include <cmath>
#include <memory>
#include <numeric>

#include "api/array_view.h"
#include "api/audio/echo_canceller3_config.h"
#include "modules/audio_processing/aec3/aec3_common.h"
#include "rtc_base/checks.h"
#include "system_wrappers/include/field_trial.h"

namespace webrtc {

namespace {

bool EnableSmoothUpdatesTailFreqResp() {
  return !field_trial::IsEnabled(
      "WebRTC-Aec3SmoothUpdatesTailFreqRespKillSwitch");
}

// Computes the ratio of the energies between the direct path and the tail. The
// energy is computed in the power spectrum domain discarding the DC
// contributions.
float ComputeRatioEnergies(
    const rtc::ArrayView<const float>& freq_resp_direct_path,
    const rtc::ArrayView<const float>& freq_resp_tail) {
  // Skipping the DC for the ratio computation
  constexpr size_t n_skip_bins = 1;
  RTC_CHECK_EQ(freq_resp_direct_path.size(), freq_resp_tail.size());

  float direct_path_energy =
      std::accumulate(freq_resp_direct_path.begin() + n_skip_bins,
                      freq_resp_direct_path.end(), 0.f);

  float tail_energy = std::accumulate(freq_resp_tail.begin() + n_skip_bins,
                                      freq_resp_tail.end(), 0.f);

  if (direct_path_energy > 0) {
    return tail_energy / direct_path_energy;
  } else {
    return 0.f;
  }
}

}  // namespace

ReverbModelEstimator::ReverbModelEstimator(const EchoCanceller3Config& config)
    : filter_main_length_blocks_(config.filter.main.length_blocks),
      reverb_decay_(std::fabs(config.ep_strength.default_len)),
      enable_smooth_freq_resp_tail_updates_(EnableSmoothUpdatesTailFreqResp()) {
  block_energies_.fill(0.f);
  freq_resp_tail_.fill(0.f);
}

ReverbModelEstimator::~ReverbModelEstimator() = default;

bool ReverbModelEstimator::IsAGoodFilterForDecayEstimation(
    int filter_delay_blocks,
    bool usable_linear_estimate,
    size_t length_filter) {
  if ((filter_delay_blocks && usable_linear_estimate) &&
      (filter_delay_blocks <=
       static_cast<int>(filter_main_length_blocks_) - 4) &&
      (length_filter >=
       static_cast<size_t>(GetTimeDomainLength(filter_main_length_blocks_)))) {
    return true;
  } else {
    return false;
  }
}

void ReverbModelEstimator::Update(
    const std::vector<float>& impulse_response,
    const std::vector<std::array<float, kFftLengthBy2Plus1>>&
        filter_freq_response,
    const absl::optional<float>& quality_linear,
    int filter_delay_blocks,
    bool usable_linear_estimate,
    float default_decay,
    bool stationary_block) {
  if (enable_smooth_freq_resp_tail_updates_) {
    if (!stationary_block) {
      float alpha = 0;
      if (quality_linear) {
        alpha = 0.2f * quality_linear.value();
        UpdateFreqRespTail(filter_freq_response, filter_delay_blocks, alpha);
      }
      if (IsAGoodFilterForDecayEstimation(filter_delay_blocks,
                                          usable_linear_estimate,
                                          impulse_response.size())) {
        alpha_ = std::max(alpha, alpha_);
        if ((alpha_ > 0.f) && (default_decay < 0.f)) {
          // Echo tail decay estimation if default_decay is negative.
          UpdateReverbDecay(impulse_response);
        }
      } else {
        ResetDecayEstimation();
      }
    }
  } else {
    UpdateFreqRespTail(filter_freq_response, filter_delay_blocks, 0.1f);
  }
}

void ReverbModelEstimator::ResetDecayEstimation() {
  accumulated_nz_ = 0.f;
  accumulated_nn_ = 0.f;
  accumulated_count_ = 0.f;
  current_reverb_decay_section_ = 0;
  num_reverb_decay_sections_ = 0;
  num_reverb_decay_sections_next_ = 0;
  found_end_of_reverb_decay_ = false;
  alpha_ = 0.f;
}

void ReverbModelEstimator::UpdateReverbDecay(
    const std::vector<float>& impulse_response) {
  constexpr float kOneByFftLengthBy2 = 1.f / kFftLengthBy2;

  // Form the data to match against by squaring the impulse response
  // coefficients.
  std::array<float, GetTimeDomainLength(kMaxAdaptiveFilterLength)>
      matching_data_data;
  RTC_DCHECK_LE(GetTimeDomainLength(filter_main_length_blocks_),
                matching_data_data.size());
  rtc::ArrayView<float> matching_data(
      matching_data_data.data(),
      GetTimeDomainLength(filter_main_length_blocks_));
  std::transform(
      impulse_response.begin(), impulse_response.end(), matching_data.begin(),
      [](float a) { return a * a; });  // TODO(devicentepena) check if focusing
                                       // on one block would be enough.

  if (current_reverb_decay_section_ < filter_main_length_blocks_) {
    // Update accumulated variables for the current filter section.

    const size_t start_index = current_reverb_decay_section_ * kFftLengthBy2;

    RTC_DCHECK_GT(matching_data.size(), start_index);
    RTC_DCHECK_GE(matching_data.size(), start_index + kFftLengthBy2);
    float section_energy =
        std::accumulate(matching_data.begin() + start_index,
                        matching_data.begin() + start_index + kFftLengthBy2,
                        0.f) *
        kOneByFftLengthBy2;

    section_energy = std::max(
        section_energy, 1e-32f);  // Regularization to avoid division by 0.

    RTC_DCHECK_LT(current_reverb_decay_section_, block_energies_.size());
    const float energy_ratio =
        block_energies_[current_reverb_decay_section_] / section_energy;

    found_end_of_reverb_decay_ = found_end_of_reverb_decay_ ||
                                 (energy_ratio > 1.1f || energy_ratio < 0.9f);

    // Count consecutive number of "good" filter sections, where "good" means:
    // 1) energy is above noise floor.
    // 2) energy of current section has not changed too much from last check.
    if (!found_end_of_reverb_decay_ && section_energy > tail_energy_) {
      ++num_reverb_decay_sections_next_;
    } else {
      found_end_of_reverb_decay_ = true;
    }

    block_energies_[current_reverb_decay_section_] = section_energy;

    if (num_reverb_decay_sections_ > 0) {
      // Linear regression of log squared magnitude of impulse response.
      for (size_t i = 0; i < kFftLengthBy2; i++) {
        RTC_DCHECK_GT(matching_data.size(), start_index + i);
        float z = FastApproxLog2f(matching_data[start_index + i] + 1e-10);
        accumulated_nz_ += accumulated_count_ * z;
        ++accumulated_count_;
      }
    }

    num_reverb_decay_sections_ =
        num_reverb_decay_sections_ > 0 ? num_reverb_decay_sections_ - 1 : 0;
    ++current_reverb_decay_section_;

  } else {
    constexpr float kMaxDecay = 0.95f;  // ~1 sec min RT60.
    constexpr float kMinDecay = 0.02f;  // ~15 ms max RT60.

    // Accumulated variables throughout whole filter.

    // Solve for decay rate.

    float decay = reverb_decay_;

    if (accumulated_nn_ != 0.f) {
      const float exp_candidate = -accumulated_nz_ / accumulated_nn_;
      decay = std::pow(2.0f, -exp_candidate * kFftLengthBy2);
      decay = std::min(decay, kMaxDecay);
      decay = std::max(decay, kMinDecay);
    }

    // Filter tail energy (assumed to be noise).
    constexpr size_t kTailLength = kFftLengthBy2;

    constexpr float k1ByTailLength = 1.f / kTailLength;
    const size_t tail_index =
        GetTimeDomainLength(filter_main_length_blocks_) - kTailLength;

    RTC_DCHECK_GT(matching_data.size(), tail_index);

    tail_energy_ = std::accumulate(matching_data.begin() + tail_index,
                                   matching_data.end(), 0.f) *
                   k1ByTailLength;

    // Update length of decay.
    num_reverb_decay_sections_ = num_reverb_decay_sections_next_;
    num_reverb_decay_sections_next_ = 0;
    // Must have enough data (number of sections) in order
    // to estimate decay rate.
    if (num_reverb_decay_sections_ < 5) {
      num_reverb_decay_sections_ = 0;
    }

    const float N = num_reverb_decay_sections_ * kFftLengthBy2;
    accumulated_nz_ = 0.f;
    const float k1By12 = 1.f / 12.f;
    // Arithmetic sum $2 \sum_{i=0.5}^{(N-1)/2}i^2$ calculated directly.
    accumulated_nn_ = N * (N * N - 1.0f) * k1By12;
    accumulated_count_ = -N * 0.5f;
    // Linear regression approach assumes symmetric index around 0.
    accumulated_count_ += 0.5f;

    // Identify the peak index of the impulse response.
    const size_t peak_index = std::distance(
        matching_data.begin(),
        std::max_element(matching_data.begin(), matching_data.end()));

    current_reverb_decay_section_ = peak_index * kOneByFftLengthBy2 + 3;
    // Make sure we're not out of bounds.
    if (current_reverb_decay_section_ + 1 >= filter_main_length_blocks_) {
      current_reverb_decay_section_ = filter_main_length_blocks_;
    }
    size_t start_index = current_reverb_decay_section_ * kFftLengthBy2;
    float first_section_energy =
        std::accumulate(matching_data.begin() + start_index,
                        matching_data.begin() + start_index + kFftLengthBy2,
                        0.f) *
        kOneByFftLengthBy2;

    // To estimate the reverb decay, the energy of the first filter section
    // must be substantially larger than the last.
    // Also, the first filter section energy must not deviate too much
    // from the max peak.
    bool main_filter_has_reverb = first_section_energy > 4.f * tail_energy_;
    bool main_filter_is_sane = first_section_energy > 2.f * tail_energy_ &&
                               matching_data[peak_index] < 100.f;

    // Not detecting any decay, but tail is over noise - assume max decay.
    if (num_reverb_decay_sections_ == 0 && main_filter_is_sane &&
        main_filter_has_reverb) {
      decay = kMaxDecay;
    }

    if (main_filter_is_sane && num_reverb_decay_sections_ > 0) {
      decay = std::max(.97f * reverb_decay_, decay);
      reverb_decay_ -= alpha_ * (reverb_decay_ - decay);
    }

    found_end_of_reverb_decay_ =
        !(main_filter_is_sane && main_filter_has_reverb);
    alpha_ = 0.f;  // Stop estimation of the decay until another good filter is
                   // received
  }
}

// Updates the estimation of the frequency response at the filter tail.
void ReverbModelEstimator::UpdateFreqRespTail(
    const std::vector<std::array<float, kFftLengthBy2Plus1>>&
        filter_freq_response,
    int filter_delay_blocks,
    float alpha) {
  size_t num_blocks = filter_freq_response.size();
  rtc::ArrayView<const float> freq_resp_tail(
      filter_freq_response[num_blocks - 1]);
  rtc::ArrayView<const float> freq_resp_direct_path(
      filter_freq_response[filter_delay_blocks]);
  float ratio_energies =
      ComputeRatioEnergies(freq_resp_direct_path, freq_resp_tail);
  ratio_tail_to_direct_path_ +=
      alpha * (ratio_energies - ratio_tail_to_direct_path_);

  for (size_t k = 0; k < kFftLengthBy2Plus1; ++k) {
    freq_resp_tail_[k] = freq_resp_direct_path[k] * ratio_tail_to_direct_path_;
  }

  for (size_t k = 1; k < kFftLengthBy2; ++k) {
    float avg_neighbour =
        0.5f * (freq_resp_tail_[k - 1] + freq_resp_tail_[k + 1]);
    freq_resp_tail_[k] = std::max(freq_resp_tail_[k], avg_neighbour);
  }
}

void ReverbModelEstimator::Dump(
    const std::unique_ptr<ApmDataDumper>& data_dumper) {
  data_dumper->DumpRaw("aec3_reverb_decay", reverb_decay_);
  data_dumper->DumpRaw("aec3_reverb_tail_energy", tail_energy_);
  data_dumper->DumpRaw("aec3_reverb_alpha", alpha_);
  data_dumper->DumpRaw("aec3_num_reverb_decay_sections",
                       static_cast<int>(num_reverb_decay_sections_));
}

}  // namespace webrtc