151 Commits

Author SHA1 Message Date
asapersson
35151f35ec Add histogram stats for average send delay of sent packets for a sent video stream. The delay is measured from a packet is sent to the transport until leaving the socket.
- "WebRTC.Video.SendDelayInMs"

Change so that PacketOption packet id is always set in RtpSender (if having a TransportSequenceNumberAllocator).
Add SendDelayStats class for computing delays.
Add SendPacketObserver to RtpRtcp config and register SendDelayStats as observer.
Wire up OnSentPacket to SendDelayStats.

BUG=webrtc:5215

Review-Url: https://codereview.webrtc.org/1478253002
Cr-Commit-Position: refs/heads/master@{#12600}
2016-05-03 06:44:11 +00:00
nisse
ef8b61e110 Enable -Winconsistent-missing-override flag.
The problem with gmock is worked around by commenting out any other override declarations in classes using gmock.

NOPRESUBMIT=True
BUG=webrtc:3970

Review-Url: https://codereview.webrtc.org/1921653002
Cr-Commit-Position: refs/heads/master@{#12563}
2016-04-29 13:09:23 +00:00
asapersson
8688a4e2b5 Add histogram stats for jitter buffer delay and current/target delay for received video streams:
- "WebRTC.Video.JitterBufferDelayInMs"
- "WebRTC.Video.TargetDelayInMs" (jitter delay + decode time + render delay)
- "WebRTC.Video.CurrentDelayInMs"

BUG=

Review-Url: https://codereview.webrtc.org/1885393002
Cr-Commit-Position: refs/heads/master@{#12539}
2016-04-28 06:42:42 +00:00
Per
ba7dc723b0 Add rotation to EncodedImage and make sure it is passed through encoders.
This fix a potential race where the rotation information of a sent frame does not match the encoded frame.

BUG=webrtc:5783
TEST= Run ApprtcDemo on IOs and Android with and without capture to texture and both VP8 and H264.
R=magjed@webrtc.org, pbos@webrtc.org, tkchin@webrtc.org
TBR=tkchin_webrtc // For IOS changes.

Review URL: https://codereview.webrtc.org/1886113003 .

Cr-Commit-Position: refs/heads/master@{#12426}
2016-04-19 13:01:32 +00:00
pbos
a96b60b3a6 Move frame_callback.h to common_video/include.
BUG=webrtc:4243
R=kjellander@webrtc.org, tommi@webrtc.org

Review URL: https://codereview.webrtc.org/1902543002

Cr-Commit-Position: refs/heads/master@{#12419}
2016-04-19 04:12:57 +00:00
nisse
d30a1117f8 Change pre_encode_callback to get a const frame.
Used only by tests. Deleted the EndToEndTest.UsesFrameCallbacks, which
modified pixel data. Change callback from in EndToEndTest.GetStats to call SleepMs, rath than
modifying the timestamp.

BUG=

Review URL: https://codereview.webrtc.org/1891733002

Cr-Commit-Position: refs/heads/master@{#12406}
2016-04-18 12:15:33 +00:00
asapersson
a186288fd0 Revert of Update histogram "WebRTC.Video.OnewayDelayInMs" to use the estimated one-way delay. (patchset #4 id:60001 of https://codereview.webrtc.org/1688143003/ )
Reason for revert:
The delay stats are high.

Original issue's description:
> Update histogram "WebRTC.Video.OnewayDelayInMs" to use the estimated one-way delay.
> Previous logged delay was: network delay (rtt/2) + jitter delay + decode time + render delay.
>
> Make capture time in local timebase available for decoded VP9 video frames (propagate ntp_time_ms from EncodedImage to decoded VideoFrame).
>
> BUG=
>
> Committed: https://crrev.com/5249599a9b69ad9c2d513210d694719f1011f977
> Cr-Commit-Position: refs/heads/master@{#11901}

TBR=stefan@webrtc.org,pbos@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=chromium:603838

Review URL: https://codereview.webrtc.org/1893543003

Cr-Commit-Position: refs/heads/master@{#12400}
2016-04-18 07:41:09 +00:00
Peter Boström
74f6e9ea23 Replace NULL with nullptr in webrtc/video.
BUG=
R=danilchap@webrtc.org

Review URL: https://codereview.webrtc.org/1855433002 .

Cr-Commit-Position: refs/heads/master@{#12218}
2016-04-04 15:56:22 +00:00
kwiberg
4a206a96c1 Remove webrtc::ScopedVector
We can (and should) use std::vector<std::unique_ptr<T>> instead.
Because it's standard, and because it's safer since callers have to
manually wrap elements in std::unique_ptr before inserting them and
manually unwrap them after inserting them.

Review URL: https://codereview.webrtc.org/1839603002

Cr-Commit-Position: refs/heads/master@{#12182}
2016-03-31 17:24:31 +00:00
nisse
7ade7b3282 Delete class webrtc::VideoRenderer and its header file.
To replace the SmoothsRenderedFrames method, added a corresponding
flag to VideoReceiveStream::Config instead.

BUG=webrtc:5426

Review URL: https://codereview.webrtc.org/1818023002

Cr-Commit-Position: refs/heads/master@{#12102}
2016-03-23 11:48:17 +00:00
skvlad
7a43d253f9 Make the audio channel communicate network state changes to the call.
This change enables voice-only calls to keep track of the network state.
This is only a partial fix - the last modality to change state controls
the state for the entire call, so a call with a failed video transport
will also stop sending audio packets. Handling this condition correctly
would require the call to keep track of network state for each media
type separately, and take care of conditions such as a failed video
channel getting removed, while a functioning audio channel remains.

BUG=webrtc:5307

Review URL: https://codereview.webrtc.org/1757683002

Cr-Commit-Position: refs/heads/master@{#12093}
2016-03-22 22:32:31 +00:00
nisse
eb83a1a10f This is an initial cleanup step, aiming to delete the
webrtc::VideoRenderer class, replacing it by rtc::VideoSinkInterface.

The next step is to convert all places where a renderer is attached to
rtc::VideoSourceInterface, and at that point, the
SmoothsRenderedFrames method can be replaced by a flag
rtc::VideoSinkWants::smoothed_frames.

Delete unused method IsTextureSupported.
Delete unused time argument to RenderFrame.
Let webrtc::VideoRenderer inherit rtc::VideoSinkInterface. Rename RenderFrame --> OnFrame.

TBR=kjellander@webrtc.org
BUG=webrtc:5426

Review URL: https://codereview.webrtc.org/1814763002

Cr-Commit-Position: refs/heads/master@{#12070}
2016-03-21 08:28:06 +00:00
asapersson
5249599a9b Update histogram "WebRTC.Video.OnewayDelayInMs" to use the estimated one-way delay.
Previous logged delay was: network delay (rtt/2) + jitter delay + decode time + render delay.

Make capture time in local timebase available for decoded VP9 video frames (propagate ntp_time_ms from EncodedImage to decoded VideoFrame).

BUG=

Review URL: https://codereview.webrtc.org/1688143003

Cr-Commit-Position: refs/heads/master@{#11901}
2016-03-08 10:10:24 +00:00
kwiberg
27f982bbcb Replace scoped_ptr with unique_ptr in webrtc/video/
BUG=webrtc:5520

Review URL: https://codereview.webrtc.org/1751903002

Cr-Commit-Position: refs/heads/master@{#11833}
2016-03-01 19:52:39 +00:00
Erik Språng
22c2b4814a Move RTP stats histograms from VieChannel to SendStatisticsProxy.
Also slice for screensharing.

BUG=
R=mflodman@webrtc.org, pbos@webrtc.org

Review URL: https://codereview.webrtc.org/1734933002 .

Cr-Commit-Position: refs/heads/master@{#11822}
2016-03-01 08:40:54 +00:00
sprang
07fb9be37f Move RTCP histograms from vie_channel to video channel stats proxies.
Also slice those histograms on content type.

BUG=

Review URL: https://codereview.webrtc.org/1720883002

Cr-Commit-Position: refs/heads/master@{#11748}
2016-02-24 15:55:06 +00:00
sprang
e2d83d6560 Use CallStats for RTT in Call, rather than VideoSendStream::GetRtt()
Also move some stats reporting from vie_channel to send stats proxy

BUG=

Review URL: https://codereview.webrtc.org/1669623004

Cr-Commit-Position: refs/heads/master@{#11688}
2016-02-19 17:03:34 +00:00
Peter Boström
fc968a283c Fix sequence-number replay race for padding.
Prevents allocating sequence numbers for packets that go out on the
network even though sending media is disabled.

This race caused a replay of sequence numbers when GetRtpState() on a
stopped stream would not return the last sequence number sent, since the
pacer thread could request and send padding on a later sequence number
before the modules are disconnected from the pacer.

BUG=webrtc:5543
R=stefan@webrtc.org
TEST=Repeating EndToEndTest.RestartingSendStreamPreservesRtpState 1000 times under TSan.

Review URL: https://codereview.webrtc.org/1715703002 .

Cr-Commit-Position: refs/heads/master@{#11685}
2016-02-19 15:14:44 +00:00
peah
a08bb0d163 Disabled the test EndToEndTest RestartingSendStreamPreservesRtpState due to the test being flaky.
BUG=webrtc:5543

Review URL: https://codereview.webrtc.org/1703963002

Cr-Commit-Position: refs/heads/master@{#11659}
2016-02-17 18:27:58 +00:00
Peter Boström
67680c1bf9 Ignore padding-only RTX packets in test.
Makes DecodesRetransmittedFrame not flake/fail due to sent padding when
probing, which is correct behavior. Also removes hack that accepted this
only during the first n packets.

BUG=
R=stefan@webrtc.org

Review URL: https://codereview.webrtc.org/1698343003 .

Cr-Commit-Position: refs/heads/master@{#11648}
2016-02-17 10:10:14 +00:00
Stefan Holmer
d20327c7d7 Increase the allowed number of probe packets in test to please msan.
This started flaking due to allowing probes to restart if they were aborted due to insufficient packets. This is reasonable behavior.

TBR=pbos@webrtc.org

Review URL: https://codereview.webrtc.org/1701033002 .

Cr-Commit-Position: refs/heads/master@{#11638}
2016-02-16 16:43:37 +00:00
Peter Boström
395939781b Reland of Don't send FEC for H.264 with NACK enabled. (patchset #1 id:1 of https://codereview.webrtc.org/1692783005/ )
Reason for revert:
Disabling tests on memcheck that time out due to using real VP8 encoders.

Original issue's description:
> Revert of Don't send FEC for H.264 with NACK enabled. (patchset #5 id:80001 of https://codereview.webrtc.org/1687303002/ )
>
> Reason for revert:
> Broke the VerifyHistogramStatsWithRed test on the Windows DrMemory Full bot and Linux Memcheck bot. Please fix the test and reland.
>
> Original issue's description:
> > Don't send FEC for H.264 with NACK enabled.
> >
> > The H.264 does not contain picture IDs and are not sufficient to
> > determine that a packet may be skipped. This causes retransmission
> > requests for FEC that are currently dropped by the sender (since they
> > should be redundant).
> >
> > The receiver is then unable to continue without having the packet gap
> > filled (unlike VP8/VP9 which moves on since it has a consecutive stream
> > of picture IDs).
> >
> > Even if FEC retransmission did work it's a huge waste of bandwidth,
> > since it just adds additional overhead that has to be unconditionally
> > transmitted. This bandwidth is better used to send higher-quality
> > frames.
> >
> > BUG=webrtc:5264
> > R=stefan@webrtc.org
> >
> > Committed: https://crrev.com/25558ad819b4df41ba51537e26a77480ace1e525
> > Cr-Commit-Position: refs/heads/master@{#11601}
>
> TBR=stefan@webrtc.org,pbos@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:5264
>
> Committed: https://crrev.com/29ffdc1a15e31bd81e806ff135c2100d811714f0
> Cr-Commit-Position: refs/heads/master@{#11607}

TBR=stefan@webrtc.org,deadbeef@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=webrtc:5264

Review URL: https://codereview.webrtc.org/1697093002 .

Cr-Commit-Position: refs/heads/master@{#11621}
2016-02-15 10:27:22 +00:00
deadbeef
29ffdc1a15 Revert of Don't send FEC for H.264 with NACK enabled. (patchset #5 id:80001 of https://codereview.webrtc.org/1687303002/ )
Reason for revert:
Broke the VerifyHistogramStatsWithRed test on the Windows DrMemory Full bot and Linux Memcheck bot. Please fix the test and reland.

Original issue's description:
> Don't send FEC for H.264 with NACK enabled.
>
> The H.264 does not contain picture IDs and are not sufficient to
> determine that a packet may be skipped. This causes retransmission
> requests for FEC that are currently dropped by the sender (since they
> should be redundant).
>
> The receiver is then unable to continue without having the packet gap
> filled (unlike VP8/VP9 which moves on since it has a consecutive stream
> of picture IDs).
>
> Even if FEC retransmission did work it's a huge waste of bandwidth,
> since it just adds additional overhead that has to be unconditionally
> transmitted. This bandwidth is better used to send higher-quality
> frames.
>
> BUG=webrtc:5264
> R=stefan@webrtc.org
>
> Committed: https://crrev.com/25558ad819b4df41ba51537e26a77480ace1e525
> Cr-Commit-Position: refs/heads/master@{#11601}

TBR=stefan@webrtc.org,pbos@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5264

Review URL: https://codereview.webrtc.org/1692783005

Cr-Commit-Position: refs/heads/master@{#11607}
2016-02-12 20:00:47 +00:00
Peter Boström
25558ad819 Don't send FEC for H.264 with NACK enabled.
The H.264 does not contain picture IDs and are not sufficient to
determine that a packet may be skipped. This causes retransmission
requests for FEC that are currently dropped by the sender (since they
should be redundant).

The receiver is then unable to continue without having the packet gap
filled (unlike VP8/VP9 which moves on since it has a consecutive stream
of picture IDs).

Even if FEC retransmission did work it's a huge waste of bandwidth,
since it just adds additional overhead that has to be unconditionally
transmitted. This bandwidth is better used to send higher-quality
frames.

BUG=webrtc:5264
R=stefan@webrtc.org

Review URL: https://codereview.webrtc.org/1687303002 .

Cr-Commit-Position: refs/heads/master@{#11601}
2016-02-12 14:08:39 +00:00
Peter Boström
c6e16e3d91 Use a delayed encoder in GetStats test.
Guarantees seeing non-zero CpuOveruseMetrics stats.

BUG=
R=stefan@webrtc.org

Review URL: https://codereview.webrtc.org/1670763005 .

Cr-Commit-Position: refs/heads/master@{#11504}
2016-02-05 13:16:03 +00:00
Peter Boström
e449915455 Measure encoding time on encode callbacks.
Permits measuring encoding time even when performed on another thread,
typically for hardware encoding, instead of assuming that encoding is
blocking the calling thread.

Permitted encoding time is increased for hardware encoders since they
can be timed to keep 30fps, for instance, without indicating overload.

Merges EncodingTimeObserver into EncodedFrameObserver to have one post-encode
callback.

BUG=webrtc:5042, webrtc:5132
R=asapersson@webrtc.org, mflodman@webrtc.org

Review URL: https://codereview.webrtc.org/1569853002 .

Cr-Commit-Position: refs/heads/master@{#11499}
2016-02-05 10:13:41 +00:00
stefan
ba4c0e45ff Add send-side BWE to WebRtcVoiceEngine under a finch experiment.
This adds negotiation of both transport sequence number and transport
feedback. Only offers transport seq num if the
WebRTC-Audio-SendSideBwe finch experiment is enabled.

TBR=mflodman@webrtc.org
BUG=webrtc:5263

Review URL: https://codereview.webrtc.org/1604563002

Cr-Commit-Position: refs/heads/master@{#11487}
2016-02-04 12:12:31 +00:00
danilchap
5c35cf9f8e Re-enable RestartingSendStreamPreservesRtpState.
based on https://codereview.webrtc.org/1457283002/
Packets allowed now to come out of order.

BUG=webrtc:3552
R=pbos@webrtc.org

Review URL: https://codereview.webrtc.org/1661923002

Cr-Commit-Position: refs/heads/master@{#11477}
2016-02-03 22:14:57 +00:00
Stefan Holmer
10880011d9 Support multiple rtx codecs.
Adds negotiation of rtx codecs for red and vp9. To keep backwards
compatibility with older Chrome versions, this change includes two
hacks:
1. Red packets will be retransmitted over the rtx codec associated with
   vp8 if no rtx codec is associated with red. This is how Chrome does
   it today and ensures that we still can send red over rtx to older
   versions.

2. If rtx packets associated with the media codec (vp8/vp9 etc) are
   received and red has been negotiated, we will assume that the sender
   incorrectly has packetized red inside the rtx header associated with
   media. We will therefore restore it with the red payload type
   instead, which ensures that we can still receive rtx associated with
   red from old versions.

Offering multiple rtx codecs to older versions should not be a problem
since old versions themselves only try to negotiate rtx for vp8.

R=pbos@webrtc.org
TBR=mflodman@webrtc.org
BUG=webrtc:4024
TEST=Verified by running apprtc and emulating packet loss between Chrome with and without the patch.

Review URL: https://codereview.webrtc.org/1649493004 .

Cr-Commit-Position: refs/heads/master@{#11472}
2016-02-03 12:30:10 +00:00
danilchap
34877eeec9 Revert of Added validation between RTP and RTCP timestamps (patchset #7 id:120001 of https://codereview.webrtc.org/1633843003/ )
Reason for revert:
May be the reason for mac_asan timeout

Original issue's description:
> Changed test to validate rtp timstamps not just in RTP packets but also in RTCP Sender Reports.
> Altered it to accept negative value since it is normal for RTCP packet coming before RTP packet to have slightly later time.
>
> BUG=webrtc:5433
>
> Committed: https://crrev.com/f4b9c775122b463db7eb2c4101603759a0d00caf
> Cr-Commit-Position: refs/heads/master@{#11417}

TBR=pbos@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=webrtc:5433

Review URL: https://codereview.webrtc.org/1652973002

Cr-Commit-Position: refs/heads/master@{#11446}
2016-02-01 16:25:08 +00:00
danilchap
f4b9c77512 Changed test to validate rtp timstamps not just in RTP packets but also in RTCP Sender Reports.
Altered it to accept negative value since it is normal for RTCP packet coming before RTP packet to have slightly later time.

BUG=webrtc:5433

Review URL: https://codereview.webrtc.org/1633843003

Cr-Commit-Position: refs/heads/master@{#11417}
2016-01-28 14:14:33 +00:00
hbos
bab934bffe H.264 video codec support using OpenH264 (http://www.openh264.org/) for encoding and FFmpeg (https://www.ffmpeg.org/) for decoding.
It works on all platforms except Android and iOS (FFmpeg limitation).

Implemented behind compile time flags, off by default.
The plan is to have it enabled in Chrome (see bug), but not in Chromium/webrtc by default.

Flags to turn it on:
- rtc_use_h264 = true
- ffmpeg_branding = "Chrome" (or other brand that includes H.264 decoder)

Tests using H264:
- video_loopback --codec=H264
- screenshare_loopback --codec=H264
- video_engine_tests (EndToEndTest.SendsAndReceivesH264)

NOTRY=True
BUG=500605, 468365
BUG=https://bugs.chromium.org/p/webrtc/issues/detail?id=5424

Review URL: https://codereview.webrtc.org/1306813009

Cr-Commit-Position: refs/heads/master@{#11390}
2016-01-27 09:36:07 +00:00
Tommi
97888bd95a Swap use of CriticalSectionWrapper for rtc::CriticalSection in webrtc/video.
While doing this, I made a couple of minor changes:
* Removed unused variables (one lock and one video frame variable)
* Switched over to a scoped lock in remb.cc and removed an if() in a function where we can just return the expression being checked.

BUG=
R=mflodman@webrtc.org

Review URL: https://codereview.webrtc.org/1613053003 .

Cr-Commit-Position: refs/heads/master@{#11349}
2016-01-21 22:25:12 +00:00
stefan
32f81542c2 Support REMB in combination with send-side BWE.
BUG=webrtc:4173

Review URL: https://codereview.webrtc.org/1581113006

Cr-Commit-Position: refs/heads/master@{#11322}
2016-01-20 15:14:03 +00:00
Stefan Holmer
04cb763955 Add tests for verifying transport feedback for audio and video.
BUG=webrtc:5263
R=mflodman@webrtc.org

Review URL: https://codereview.webrtc.org/1589523002 .

Cr-Commit-Position: refs/heads/master@{#11255}
2016-01-14 19:34:39 +00:00
stefan
e74eef19bd Add CreateSend/ReceiveTransport() methods to CallTest.
This allows the test to create its own transports if it, for instance, needs to do demuxing.

BUG=webrtc:5416

Review URL: https://codereview.webrtc.org/1573453002

Cr-Commit-Position: refs/heads/master@{#11187}
2016-01-08 14:47:21 +00:00
Stefan Holmer
9fea80f50d Add audio streams to CallTest and a first A/V call test.
Add audio send and receive streams to CallTest and call the necessary voice engine APIs for the streams to be usable. Verifies the implementation by adding a simple test which monitors outgoing packets and checks that both audio and video is being sent with transport sequence numbers.

Audio streams are using a fake audio device with file input.

The CallTest implementation is to a big degree based on call_perf_tests.cc and should in the future replace a lot of that code.

R=pbos@webrtc.org
TBR=kjellander@webrtc.org

BUG=webrtc:5263

Review URL: https://codereview.webrtc.org/1542653002 .

Cr-Commit-Position: refs/heads/master@{#11171}
2016-01-07 16:43:31 +00:00
Peter Boström
e2976c87f7 Remove DISABLED_ON_ macros.
Macro incorrectly displays DISABLED_ON_ANDROID in test names for
parameterized tests under --gtest_list_tests, causing tests to be
disabled on all platforms since they contain the DISABLED_ prefix rather
than their expanded variants.

This expands the macro variants to inline if they're disabled or not,
and removes building some tests under configurations where they should
fail, instead of building them but disabling them by default.

The change also removes gtest_disable.h as an unused include from many
other files.

BUG=webrtc:5387, webrtc:5400
R=kjellander@webrtc.org, phoglund@webrtc.org
TBR=henrik.lundin@webrtc.org

Review URL: https://codereview.webrtc.org/1547343002 .

Cr-Commit-Position: refs/heads/master@{#11150}
2016-01-04 21:44:16 +00:00
stefan
ff483617a4 Step 1 to prepare call_test.* for combined audio/video tests.
Also move (and clean up includes) rampup_tests.* to webrtc/call in preparation for combined audio/video ramp-up tests.

No functional changes.

BUG=webrtc:5263

Review URL: https://codereview.webrtc.org/1537273003

Cr-Commit-Position: refs/heads/master@{#11101}
2015-12-21 11:14:05 +00:00
Peter Boström
b7d9a97ce4 Expose codec implementation names in stats.
Used to distinguish between software/hardware encoders/decoders and
other implementation differences. Useful for tracking quality
regressions related to specific implementations.

BUG=webrtc:4897
R=hta@webrtc.org, mflodman@webrtc.org, stefan@webrtc.org

Review URL: https://codereview.webrtc.org/1406903002 .

Cr-Commit-Position: refs/heads/master@{#11084}
2015-12-18 15:01:23 +00:00
Peter Boström
5811a39f14 Replace EventWrapper in video/, test/ and call/.
Makes use of rtc::Event which is simpler and can be used without
allocating additional objects on the heap.

Does not modify test/channel_transport/.

BUG=
R=mflodman@webrtc.org

Review URL: https://codereview.webrtc.org/1487893004 .

Cr-Commit-Position: refs/heads/master@{#10968}
2015-12-10 12:03:00 +00:00
mflodman
d1590b2571 Lint clean video/ and add lint presubmit check.
BUG=webrtc:5316

Review URL: https://codereview.webrtc.org/1507643004

Cr-Commit-Position: refs/heads/master@{#10953}
2015-12-09 15:08:05 +00:00
Peter Boström
5f6deaf525 Remove unused RTP-header parser.
D'oh.

BUG=
R=sprang@webrtc.org

Review URL: https://codereview.webrtc.org/1506743003 .

Cr-Commit-Position: refs/heads/master@{#10915}
2015-12-07 15:18:18 +00:00
Peter Boström
03671cb38a Use existing parser in ReceivesAndRetransmitsNack.
Removes logspam of "Failed to find extension id:".

BUG=
TBR=sprang@webrtc.org

Review URL: https://codereview.webrtc.org/1502993003 .

Cr-Commit-Position: refs/heads/master@{#10913}
2015-12-07 14:22:34 +00:00
sprang
b4a1ae5299 Add separate send-side UMA stats for screenshare and video.
This CL duplicates all the histograms in SendStatisticsProxy. Might be
overkill, but we don't know which stats will be interesting and it makes
the change easier.

BUG=

Review URL: https://codereview.webrtc.org/1433393002

Cr-Commit-Position: refs/heads/master@{#10885}
2015-12-03 16:10:13 +00:00
jbauch
db81ffd6f5 Request keyframe if too many packets are missing and NACK is disabled.
This allows enabling "EndToEndTest.ReceivesPliAndRecoversWithoutNack".

BUG=webrtc:2250

Review URL: https://codereview.webrtc.org/1211873004

Cr-Commit-Position: refs/heads/master@{#10747}
2015-11-23 11:59:07 +00:00
stefan
43edf0ffb9 Require negotiation to send transport cc feedback over RTCP.
BUG=4312

Review URL: https://codereview.webrtc.org/1452883002

Cr-Commit-Position: refs/heads/master@{#10735}
2015-11-21 02:05:53 +00:00
Henrik Kjellander
2557b86e76 modules/video_coding refactorings
The main purpose was the interface-> include rename, but other files
were also moved, eliminating the "main" dir.

To avoid breaking downstream, the "interface" directories were copied
into a new "video_coding/include" dir. The old headers got pragma
warnings added about deprecation (a very short deprecation since I plan
to remove them as soon downstream is updated).

Other files also moved:
video_coding/main/source -> video_coding
video_coding/main/test -> video_coding/test

BUG=webrtc:5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc

R=stefan@webrtc.org, tommi@webrtc.org

Review URL: https://codereview.webrtc.org/1417283007 .

Cr-Commit-Position: refs/heads/master@{#10694}
2015-11-18 21:00:33 +00:00
stefan
18adf0a79d Add UMA for send bwe and pacer bitrate.
Review URL: https://codereview.webrtc.org/1434403004

Cr-Commit-Position: refs/heads/master@{#10675}
2015-11-17 14:25:02 +00:00
asapersson
6f14be8df8 Add limit for minimum number of required samples before recording input and sent framerate stats.
BUG=

Review URL: https://codereview.webrtc.org/1446443002

Cr-Commit-Position: refs/heads/master@{#10644}
2015-11-16 08:40:57 +00:00