Previously only mic level calculated by the legacy agc was logged in aecdebug dumps.
Now we log it for any agc.
In addition, it is now possible to turn on and off debug recording in the test tool voe_cmd_test.
BUG=4274
TESTED=verified using voe_cmd_test
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/39839004
Cr-Commit-Position: refs/heads/master@{#8274}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8274 4adac7df-926f-26a2-2b94-8c16560cd09d
This change switches from the old codec wrappers ACMPCMU and ACMPCMA
to the new AudioEncoderPcmU and AudioEncoderPcmA wrapped in an
ACMGenericCodecWrapper. RED and CNG is also switched to using their
AudioEncoder implementations (AudioEncoderCopyRed and AudioEncoderCng,
respectively), when RED and/or CNG is combined with PCM u/A.
This is the first in a series of changes that will switch all codecs
to use the new AudioEncoder interface.
BUG=4228
COAUTHOR=kwiberg@webrtc.orgR=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/33209004
Cr-Commit-Position: refs/heads/master@{#8268}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8268 4adac7df-926f-26a2-2b94-8c16560cd09d
sending RTP module for the specified simulcast layer a frame belongs to.
This CL also removes the corresponding functionality from the RTP RTCP
module and fixes lint warnings in the files touched.
BUG=769
TEST=New unittest and manual tests
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/39629004
Cr-Commit-Position: refs/heads/master@{#8267}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8267 4adac7df-926f-26a2-2b94-8c16560cd09d
The new format instantiates the RemoteBitrateEstimator at the send-side and feeds back all packet arrival timestamps and sequence numbers to the sender, where inter-arrival deltas are calculated.
Next step will be to make feedback packets part of regular packets and send them over the network. This also requires bi-directional simulations.
BUG=4173
R=mflodman@webrtc.org, sprang@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37109004
Cr-Commit-Position: refs/heads/master@{#8264}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8264 4adac7df-926f-26a2-2b94-8c16560cd09d
* Add a new WakeUp method that gives a module a chance to be called back right away on the worker thread.
* Wrote unit tests for the class.
* Significantly reduce the amount of locking.
- ProcessThreadImpl itself does a lot less locking.
- Reimplemented the way we keep track of when to make calls to Process.
This reduces the amount of calls to TimeUntilNextProcess and since most implementations of that function grab a lock, this means less locking.
* Renamed ProcessThread::CreateProcessThread to ProcessThread::Create.
* Added thread checks for Start/Stop. Threading model of other functions is now documented.
* We now log an error if an implementation of TimeUntilNextProcess returns a negative value (some implementations do, but the method should only return a positive nr of ms).
* Removed the DestroyProcessThread method and instead force callers to use scoped_ptr<> to maintain object lifetime.
BUG=2822
R=henrika@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/35999004
Cr-Commit-Position: refs/heads/master@{#8261}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8261 4adac7df-926f-26a2-2b94-8c16560cd09d
This test will replace AcmOpusTest when ACMOpus is removed. The old
AcmOpusTest also contains tests for setting and updating the
"application" setting in Opus. However, in the new AudioEncoderOpus
class, the application is trivially set in the Config struct at
construction, wherefore a test is no longer needed.
BUG=3926
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37929004
Cr-Commit-Position: refs/heads/master@{#8244}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8244 4adac7df-926f-26a2-2b94-8c16560cd09d
This is the same change as already made for Windows:
https://webrtc-codereview.appspot.com/37069004/
* Remove "dead" and "alive" variables.
* Remove critical section
* Remove implementation of SetNotAlive()
* Always set thread name
* Add thread checks for correct usage.
* Changed AudioDeviceMac to create/start/stop/delete thread objects for playout and recording, inside the respective start and stop method. The reason for this is because the AudioDeviceMac instance is currently being created on one thread and the above Start/Stop methods are being called on a different thread. So, my change makes creation, start/stop, deletion of the thread objects always happen on the same thread.
I'm making CurrentThreadId() in rtc_base_approved more visible so that it can be used from there instead of inside webrtc. Down the line we will have more thread concepts in rtc_base_approved, so I put a TODO for myself to move this functionality to there once we do.
R=henrika@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/40599004
Cr-Commit-Position: refs/heads/master@{#8235}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8235 4adac7df-926f-26a2-2b94-8c16560cd09d
To more easily determine if for example the AEC is not working properly one could monitor how often the estimated delay is out of bounds. With out of bounds we mean either being negative or too large, where both cases will break the AEC.
A new delay metric is added telling the user how often poor delay values were estimated. This is measured in percentage since last time the metrics were calculated.
All APIs have been updated with a third parameter with EchoCancellation::GetDelayMetrics() giving the option to exclude the new metric not to break existing code.
The new metric has been added to audio_processing_unittests with an additional protobuf member, and reference files accordingly updated.
voe_auto_test has not been updated to display the new metric.
BUG=4246
TESTED=audioproc on files
R=aluebs@webrtc.org, andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/39739004
Cr-Commit-Position: refs/heads/master@{#8230}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8230 4adac7df-926f-26a2-2b94-8c16560cd09d
Changes differing from https://webrtc-codereview.appspot.com/37859004:
* I put the include_tests==1 stuff of audio_coding.gypi in its
own audio_coding_tests.gypi file, including the Android and isolate
targets which were incorrectly located in the previous CL
* I moved the bwe utilities in remote_bitrate_estimator.gypi
into include_tests==1 since they depend on test.gyp after I
cleaned up the duplicated inclusion of rtp_file_reader.cc
R=stefan@webrtc.orgTBR=tina.legrand@webrtc.org
TESTED=Passing gyp and compile using:
webrtc/build/gyp_webrtc -Dinclude_tests=1
webrtc/build/gyp_webrtc -Dinclude_tests=0
I also setup a Chromium checkout with my checkout mounted in
third_party/webrtc and ran build/gyp_chromium successfully.
BUG=4185
Review URL: https://webrtc-codereview.appspot.com/33159004
Cr-Commit-Position: refs/heads/master@{#8205}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8205 4adac7df-926f-26a2-2b94-8c16560cd09d
- Add max_bit_rate and max_payload_size_bytes to config structs.
- Fix support for 48 kHz sample rate.
- Fix iSAC-RED.
- Add method UpdateDecoderSampleRate().
- Update locking structure with a separate lock for local member
variables used by the encoder methods.
BUG=3926
COAUTHOR:kwiberg@webrtc.org
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41659004
Cr-Commit-Position: refs/heads/master@{#8204}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8204 4adac7df-926f-26a2-2b94-8c16560cd09d
This fixes a two year old TODO of deleting dead code :)
In cases where the _id or id_ member variable is being used for tracing,
I changed the member to at least be const.
It doesn't look like id's are that useful anymore so maybe the next step is to get rid of them.
BUG=
R=henrika@webrtc.org, perkj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37849004
Cr-Commit-Position: refs/heads/master@{#8201}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8201 4adac7df-926f-26a2-2b94-8c16560cd09d
This required to move the AGC tools source files
into webrtc/tools and create a new agc_test_utils target.
Since audio_codec_speed_tests.gypi referenced sources above,
the best approach I could come up with was to add an audio_coding.gypi
file at a higher level and move the targets in there (+ the includes from
modules.gyp which is an improvement IMO).
I also added a PRESUBMIT.py check to prevent new source
entries being added with <(webrtc_root) in the path.
BUG=4185
R=andrew@webrtc.org, tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37859004
Cr-Commit-Position: refs/heads/master@{#8197}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8197 4adac7df-926f-26a2-2b94-8c16560cd09d
When using the paced sender, packets will be put into the rtp packet
history and then retreived from there again when it is time to send.
In some cases (low send bitrate and very large frames created) this
may overflow, causing packets to be overwritten in the packet history
before they have been sent.
Check this condition and expand history size if needed.
This is primarily triggered during screenshare, when
switching to a large picture with lots of high frequency
details in it.
BUG=4171
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/34879004
Cr-Commit-Position: refs/heads/master@{#8195}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8195 4adac7df-926f-26a2-2b94-8c16560cd09d
