- Add max_bit_rate and max_payload_size_bytes to config structs.
- Fix support for 48 kHz sample rate.
- Fix iSAC-RED.
- Add method UpdateDecoderSampleRate().
- Update locking structure with a separate lock for local member
variables used by the encoder methods.
BUG=3926
COAUTHOR:kwiberg@webrtc.org
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41659004
Cr-Commit-Position: refs/heads/master@{#8204}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8204 4adac7df-926f-26a2-2b94-8c16560cd09d
This fixes a two year old TODO of deleting dead code :)
In cases where the _id or id_ member variable is being used for tracing,
I changed the member to at least be const.
It doesn't look like id's are that useful anymore so maybe the next step is to get rid of them.
BUG=
R=henrika@webrtc.org, perkj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37849004
Cr-Commit-Position: refs/heads/master@{#8201}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8201 4adac7df-926f-26a2-2b94-8c16560cd09d
This required to move the AGC tools source files
into webrtc/tools and create a new agc_test_utils target.
Since audio_codec_speed_tests.gypi referenced sources above,
the best approach I could come up with was to add an audio_coding.gypi
file at a higher level and move the targets in there (+ the includes from
modules.gyp which is an improvement IMO).
I also added a PRESUBMIT.py check to prevent new source
entries being added with <(webrtc_root) in the path.
BUG=4185
R=andrew@webrtc.org, tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37859004
Cr-Commit-Position: refs/heads/master@{#8197}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8197 4adac7df-926f-26a2-2b94-8c16560cd09d
When using the paced sender, packets will be put into the rtp packet
history and then retreived from there again when it is time to send.
In some cases (low send bitrate and very large frames created) this
may overflow, causing packets to be overwritten in the packet history
before they have been sent.
Check this condition and expand history size if needed.
This is primarily triggered during screenshare, when
switching to a large picture with lots of high frequency
details in it.
BUG=4171
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/34879004
Cr-Commit-Position: refs/heads/master@{#8195}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8195 4adac7df-926f-26a2-2b94-8c16560cd09d
The following three methods are added:
rtp_timestamp_rate_hz()
SetTargetBitrate()
SetProjectedPacketLossRate()
Default implementations are provided, and a few overrides are
implemented. AudioEncoderCopyRed and AudioEncoderCng propagate the new
methods to the underlying speech codec.
BUG=3926
COAUTHOR:kwiberg@webrtc.org
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/34049004
Cr-Commit-Position: refs/heads/master@{#8171}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8171 4adac7df-926f-26a2-2b94-8c16560cd09d
Previously, the delay estimate history was reset every time the metrics were pulled. This required all clients to be on the same thread and make use of one call.
Now we use a fixed aggregation window of one second and when a client pulls the metrics you get the latest value.
Under certain circumstances like tests you would like to have the aggregation window set to the recording length. We therefore turn on the fixed aggregation window after the first call.
BUG=2994
TESTED=locally on Mac and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/38759004
Cr-Commit-Position: refs/heads/master@{#8170}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8170 4adac7df-926f-26a2-2b94-8c16560cd09d
Broke compile on the Chromium FYI bots:
http://build.chromium.org/p/chromium.webrtc.fyi/builders/Win%20Builder/builds/3483http://build.chromium.org/p/chromium.webrtc.fyi/builders/Mac/builds/16028http://build.chromium.org/p/chromium.webrtc.fyi/builders/Linux/builds/14293
Error:
In file included from ../../third_party/webrtc/voice_engine/channel.cc:13:
In file included from ../../third_party/webrtc/base/checks.h:22:
In file included from ../../third_party/webrtc/overrides/webrtc/base/logging.h:35:
../../base/logging.h:367:9:error: 'LOG' macro redefined [-Werror,-Wmacro-redefined]
#define LOG(severity) LAZY_STREAM(LOG_STREAM(severity), LOG_IS_ON(severity))
^
../../third_party/webrtc/system_wrappers/interface/logging.h:123:9: note: previous definition is here
#define LOG(sev) \
^
In file included from ../../third_party/webrtc/voice_engine/channel.cc:13:
In file included from ../../third_party/webrtc/base/checks.h:22:
../../third_party/webrtc/overrides/webrtc/base/logging.h:189:9:error: 'LOG_V' macro redefined [-Werror,-Wmacro-redefined]
#define LOG_V(sev) DIAGNOSTIC_LOG(sev, NONE, 0)
^
../../third_party/webrtc/system_wrappers/interface/logging.h:129:9: note: previous definition is here
#define LOG_V(sev) \
^
2 errors generated.
> Modify some tests to never use DTX disable mode
>
> DTX disable mode will be removed as a part of the ACM redesign work.
>
> COAUTHOR:kwiberg@webrtc.org
>
> R=henrika@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/34769004TBR=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/35859004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8129 4adac7df-926f-26a2-2b94-8c16560cd09d
Doing something similar for the band 16-24kHz to what is done for the band 8-16kHz. The only difference is that there is no comfort noise added in this band. Could not test how this sounds because there are no aecdumps with 48kHz sample rate as nfar as I know.
Tested for 32kHz sample rate and the output is bitexact with how it was before this CL.
BUG=webrtc:3146
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/28319004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8080 4adac7df-926f-26a2-2b94-8c16560cd09d
Take the 50% quantile of the mask and compare it to certain threshold to determine if the desired signal is present. A hold is applied to avoid fast switching between states.
is_signal_present_ has been plotted and looks as expected. The AGC adaptation sounds promising, specially for the cases when the speaker fades in and out from the beam direction.
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/28329005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8078 4adac7df-926f-26a2-2b94-8c16560cd09d
