This CL introduces the ability to control the usage of the shadow filter
output in the echo canceller output.
Bug: webrtc:9694,chromium:879451
Change-Id: I01f90de60de1799b32892051c176bda5e1a8d33e
Reviewed-on: https://webrtc-review.googlesource.com/97020
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24506}
During this work a parameter is added to the configuration file for the AEC3 that allows to enable or disable the use of a different ERLE estimation for the render onsets.
Bug: webrtc:9677
Change-Id: I467f2cd20683fee06b69c0ba51a90816c9e14f29
Reviewed-on: https://webrtc-review.googlesource.com/96082
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24470}
- Changes in the early reverberation estimation.
- Code optimization by avoiding squaring the whole impulse response.
Bug: webrtc:9651
Change-Id: Iefd4f5ad52a2584d21b20934db1fae5cb1bc81ed
Reviewed-on: https://webrtc-review.googlesource.com/95483
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24464}
Disables the faster filter adaptation in the event of
microphone gain changes as it sometimes impacted transparency
negatively.
Bug: webrtc:9526,chromium:863826
Change-Id: I48fb6dd45440518aaf94b6469d6bb891247ea4ab
Reviewed-on: https://webrtc-review.googlesource.com/95143
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24461}
Removing the some kill switches from the AEC3 codebase. CL is tested for
bit exactness.
Bug: webrtc:8671
Change-Id: I6ecdb1b5ccb05dca79bf0a0cd471f53d79d71d7e
Reviewed-on: https://webrtc-review.googlesource.com/96181
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24460}
This CL adds adaptive handling of platforms where the echo path has
a strong gain above 10 kHz. A configurable offset is adaptively applied
depending on the amount of echo and mode of the echo suppressor.
Bug: webrtc:9663
Change-Id: I27dde6dc23b04a76a3be8c49d7fc9e226b9137e6
Reviewed-on: https://webrtc-review.googlesource.com/95947
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24448}
Disable the use of ERLE uncertainty with a diverged filter as it has
been shown to make transparency worse.
Bug: webrtc:9668
Change-Id: I5e23665def187c0d1cf47a029c4ebc950e79bb44
Reviewed-on: https://webrtc-review.googlesource.com/96140
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24446}
This CL allows selecting an echo suppressor behavior which is specific
for whether the nearend is dominant, or the echo is dominant.
The changes in this CL are bitexact.
Bug: webrtc:9660
Change-Id: Ie32e65efe47e692de6d6a22a7ad3b469d745fd6b
Reviewed-on: https://webrtc-review.googlesource.com/95725
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24434}
This CL removes the UpdateGainIncrease code that is not used anymore.
The CL has been tested for bit exactness.
Bug: webrtc:8671
Change-Id: I4fcf26c3b4b5bba760ee139416ddefac86a36c2e
Reviewed-on: https://webrtc-review.googlesource.com/95940
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24425}
This CL removes some of the unused code in the suppressor. The CL has
been tested for bit exactness.
Bug: webrtc:8671
Change-Id: I960f9445dfd109cf1d5790debb8758872b5b8d0d
Reviewed-on: https://webrtc-review.googlesource.com/95682
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24417}
This CL removes the unused coherence computation from AEC3. This CL
only removes unused code, the output of AEC3 does not change.
Bug: webrtc:8671
Change-Id: Ie127c5ec64e29414f1e1570511d57a4d09fc9145
Reviewed-on: https://webrtc-review.googlesource.com/95650
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24403}
This CL adds functionality for applying an optional fixed delay in AEC3
to the capture signal
Bug: webrtc:9647
Change-Id: Id3b3f896bcf203e6611298dc804c3c80da9f1883
Reviewed-on: https://webrtc-review.googlesource.com/95142
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24399}
This CL:
-Adds another config parameter that controls the duration of the initial
state.
-Adds reading of that parameter in audioproc_f from the json settings file.
-Adds missing reading of another parameter in audioproc_f from the json
settings file.
Bug: webrtc:8671
Change-Id: Ie6164c360492de5e6b0ade8838bbabe214560b5e
Reviewed-on: https://webrtc-review.googlesource.com/94621
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24360}
This CL lowers the margins in the AEC3 conservative mode to increase
the transparency when there are audio buffer issues, and during call
startup.
In particular, this CL adjusts the parameters and thresholds to
-Make the requirements for filter divergence more strict, to minimize
the transparency loss during minor filter divergence.
-Decrease the echo power uncertainty used during initial filter
convergence, to increase transparency after audio buffer issues.
-Deactivate the enforcement of conservative suppressor gain after
audio buffer.
Bug: webrtc:9641,chromium:875611
Change-Id: Ie171bb411f17a1e8661c291118debd334f65c74f
Reviewed-on: https://webrtc-review.googlesource.com/94776
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24333}
This CL ensures that the linear echo prediction mode is not used
when the transparent mode is active.
TBR: saza@webrtc.org,gustaf@webrtc.org
Bug: webrtc:9612,chromium:873074
Change-Id: I25cda5226251df769b6524594ea8a2b78532aaec
Reviewed-on: https://webrtc-review.googlesource.com/93740
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24268}
This CL changes the AEC3 code to allow the main and shadow filters
to have different lengths.
Bug: webrtc:9614,chromium:873100
Change-Id: I3ec2861d496986610d5a73db5771bbe9b8bf7dcd
Reviewed-on: https://webrtc-review.googlesource.com/93465
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24265}
This CL makes the jump-starting of the shadow filter more extreme.
It furthermore utilizes this to allow the AEC to rely further, and
more quickly on its linear filter estimates.
The result is mainly increased transparency but also some
cases of fewer echo blips.
Bug: webrtc:9612,chromium:873074
Change-Id: I90f7cfbff9acb9d0c36409593afbf476e7a830d3
Reviewed-on: https://webrtc-review.googlesource.com/93461
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24264}
This CL ensures that the shadow filter is adapted at each block, which
avoids that a temporary filter length mismatch can occur between the
main and shadow filters.
Bug: webrtc:9602,chromium:872201
Change-Id: I651812b4e3b134c6c5e1fe3df5ab78dbdb5c1fb4
Reviewed-on: https://webrtc-review.googlesource.com/93000
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24253}
This CL adds functionality to use the shadow filter output instead
of the main filter output for cases when the former is better than
the latter. One case when that happens is when there have been an
echo path change, either in the acoustic path, in the audio buffers
or due to some active audio processing effects being applied on
the device.
The CL causes less echo leaks, in particular on devices with
active render processing.
Bug: webrtc:9581,chromium:869821
Change-Id: Icb8df1b94141598da82dc188051ac59e43338938
Reviewed-on: https://webrtc-review.googlesource.com/91820
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24166}
This CL introduces an adaptive estimation of the early reverb
in the estimation for the room reverberation. The benefits of
this is that for room with long early reflections there is
a lower risk of underestimating the reverberation.
This CL is for a landing the code in
https://webrtc-review.googlesource.com/c/src/+/87420,
and the review of the code was done in that CL. The author of
code is devicentepena@webrtc.org
Bug: webrtc:9479, chromium:865397
Change-Id: Id6f57e2a684664aef96e8c502e66775f37da59da
Reviewed-on: https://webrtc-review.googlesource.com/91162
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24146}
This CL increases the AEC3 transparency during call
startup and after echo path delay changes in 3 ways:
1. The exit requirements for the initial mode is
made less strict.
2. The requirements for using the linear echo model
are made less strict.
3. The duplicated reverb modelling in the linear mode
removed.
Bug: webrtc:9572,chromium:868329
Change-Id: I79ea0796ed26408e35576bb39eaae4e4848b4f83
Reviewed-on: https://webrtc-review.googlesource.com/90868
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24132}
This CL adds a functionality that jump-starts the
AEC3 shadow filter whenever it performs consistently
worse than the main filter.
The jump-start is done such that the shadow filter
is re-initialized using the main filter coefficients.
The effects of this is a significantly more accurate
main linear filter which leads to less echo leakage
and better transparency
Bug: webrtc:9565, chromium:867873
Change-Id: Ie0b23cd536adc7ce96fc3ed2a7db112aec7437f1
Reviewed-on: https://webrtc-review.googlesource.com/90413
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24117}
This CL corrects the way that the echo subtractor output is
adjusted during the adjustment of the adaptive filter when the
analog AGC gain changes.
The CL also ensures that the main adaptive filter is not updated
when this occurs.
Bug: webrtc:9561,chromium:867373
Change-Id: I636f936128f7d9f0d82ca4140b59f148eb35d6a4
Reviewed-on: https://webrtc-review.googlesource.com/90401
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24101}
This CL removes //build/config/clang:find_bad_constructs from the
suppressed_configs list, which means that clang:find_bad_constructs
is now enabled on these translation units.
Bug: webrtc:9251
Change-Id: Ibdafc0bb08de1be7189af7053a67a24e3a26bd6b
Reviewed-on: https://webrtc-review.googlesource.com/89001
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23997}
This CL re-activates the explicit handling of microphone
gain changes in the AEC3 code. The implementation is done
beneath a kill-switch so that when that switch is active
the changes in this CL are bitexact.
Bug: webrtc:9526,chromium:863826
Change-Id: I58e93d8bc0bce7bec91e102de9891ad48ebc55d8
Reviewed-on: https://webrtc-review.googlesource.com/88620
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23986}
This CL refactors the code in AEC3 that analyzes how
well the adaptive filter performs. The purpose of this
is both to simplify code that is more complex than needed
and also to pave the wave for the upcoming CLs that
softens the echo suppression during doubletalk.
The main changes are that:
-The shadow adaptive filter is now never analyzed. This
turned out to never affect the output in the recordings
it was tested on.
-The convergence analysis was moved to the aec state
code.
The changes are bitexact on all testcases where they
have been tested on.
Bug: webrtc:8671
Change-Id: If76b669565325c8eb4d11d1178a7e20306da9a26
Reviewed-on: https://webrtc-review.googlesource.com/87430
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23958}
This reverts commit e90879097c7151148aaad57393967cf72d233a69.
Reason for revert: breaking downstream projects
Original change's description:
> IWYU: Add <cmath> for fabsf() and powf(), switch to C++ versions
>
> Fix the build with libstdc++ after 496cedfe5 ("AEC3: Reverberation model:
> Changes on the decay estimation") by including the missing header:
>
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc: In constructor ‘webrtc::ReverbModelEstimator::ReverbModelEstimator(const webrtc::EchoCanceller3Config&)’:
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: error: ‘fabsf’ was not declared in this scope
> reverb_decay_(fabsf(config.ep_strength.default_len)),
> ^~~~~
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: note: suggested alternative: ‘labs’
> reverb_decay_(fabsf(config.ep_strength.default_len)),
> ^~~~~
> labs
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc: In member function ‘void webrtc::ReverbModelEstimator::UpdateReverbDecay(const std::vector<float>&)’:
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc:206:15: error: ‘powf’ was not declared in this scope
> decay = powf(2.0f, -exp_candidate * kFftLengthBy2);
> ^~~~
>
> While here, also switch to the C++ versions of those functions: std::fabs()
> and std::pow() respectively.
>
> Spotted by Jose Dapena Paz <jose.dapena@lge.com>.
>
> Bug: chromium:819294
> Change-Id: Id803243be8dd17eac95c70a88a37ee2fe1505a5a
> Reviewed-on: https://webrtc-review.googlesource.com/87421
> Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#23870}
TBR=gustaf@webrtc.org,alessiob@webrtc.org,raphael.kubo.da.costa@intel.com,devicentepena@webrtc.org
Change-Id: I22423a2d4201183f70ae084e0e21930367824f1c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:819294
Reviewed-on: https://webrtc-review.googlesource.com/87401
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23871}
Fix the build with libstdc++ after 496cedfe5 ("AEC3: Reverberation model:
Changes on the decay estimation") by including the missing header:
../../modules/audio_processing/aec3/reverb_model_estimator.cc: In constructor ‘webrtc::ReverbModelEstimator::ReverbModelEstimator(const webrtc::EchoCanceller3Config&)’:
../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: error: ‘fabsf’ was not declared in this scope
reverb_decay_(fabsf(config.ep_strength.default_len)),
^~~~~
../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: note: suggested alternative: ‘labs’
reverb_decay_(fabsf(config.ep_strength.default_len)),
^~~~~
labs
../../modules/audio_processing/aec3/reverb_model_estimator.cc: In member function ‘void webrtc::ReverbModelEstimator::UpdateReverbDecay(const std::vector<float>&)’:
../../modules/audio_processing/aec3/reverb_model_estimator.cc:206:15: error: ‘powf’ was not declared in this scope
decay = powf(2.0f, -exp_candidate * kFftLengthBy2);
^~~~
While here, also switch to the C++ versions of those functions: std::fabs()
and std::pow() respectively.
Spotted by Jose Dapena Paz <jose.dapena@lge.com>.
Bug: chromium:819294
Change-Id: Id803243be8dd17eac95c70a88a37ee2fe1505a5a
Reviewed-on: https://webrtc-review.googlesource.com/87421
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23870}
Fix the build with libstdc++ after 496cedfe5 ("AEC3: Reverberation model:
Changes on the decay estimation") by including the missing header:
../../modules/audio_processing/aec3/reverb_model_estimator.cc: In constructor ‘webrtc::ReverbModelEstimator::ReverbModelEstimator(const webrtc::EchoCanceller3Config&)’:
../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: error: ‘fabsf’ was not declared in this scope
reverb_decay_(fabsf(config.ep_strength.default_len)),
^~~~~
../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: note: suggested alternative: ‘labs’
reverb_decay_(fabsf(config.ep_strength.default_len)),
^~~~~
labs
../../modules/audio_processing/aec3/reverb_model_estimator.cc: In member function ‘void webrtc::ReverbModelEstimator::UpdateReverbDecay(const std::vector<float>&)’:
../../modules/audio_processing/aec3/reverb_model_estimator.cc:206:15: error: ‘powf’ was not declared in this scope
decay = powf(2.0f, -exp_candidate * kFftLengthBy2);
^~~~
Spotted by Jose Dapena Paz <jose.dapena@lge.com>.
Bug: chromium:819294
Change-Id: If992e5e473b9d4d0c1b3c1006c3816b7c4eee296
Reviewed-on: https://webrtc-review.googlesource.com/87241
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Raphael Kubo da Costa (rakuco) <raphael.kubo.da.costa@intel.com>
Cr-Commit-Position: refs/heads/master@{#23863}
This clarifies the dependencies of utility/ a lot (spoiler:
there are very few) and makes it easier to separate the build
targets for aecm and aec2.
Bug: webrtc:9488
Change-Id: If916f86e80c19d1b650d0908fbe8343ea7c47bd7
Reviewed-on: https://webrtc-review.googlesource.com/87141
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23860}
The main filter is adapted at a lower rate which reduces the risk of
diverging during double talk. The change yields notable transparency
improvements.
Bug: webrtc:9497
Change-Id: Ib23b7a4055d313dede535d2b65dc7e023a2db042
Reviewed-on: https://webrtc-review.googlesource.com/87300
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23858}
In this CL we have introduced changes on the estimation of the decay involved in the exponential modeling of the reverberation. Specifically, the instantaneous ERLE has been tracked and used for adapting faster in the regions when the linear filter is performing well. Furthermore, the adaptation is just perform during render activity.
Change-Id: I974fd60e4e1a40a879660efaa24457ed940f77b4
Bug: webrtc:9479
Reviewed-on: https://webrtc-review.googlesource.com/86680
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23836}
This change simplifies the calculation of the suppression gains.
It also contains a new tuning of the suppressor.
The suppressor behavior is tuned by setting echo-to-nearend ratios
for when the suppressor is to be fully transparent and for when to
fully suppress. An echo-to-masker value determines when the signal
is masked by noise. These three values are specified for low and
high frequencies.
Change-Id: I108e83c8f2a35462085a3fabaebcc02fa3103607
Bug: webrtc:9482
Reviewed-on: https://webrtc-review.googlesource.com/86021
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23830}
In this work the performance of the linear filter is
estimated. The estimation aims at capture situations when the linear
filter is largely over-estimating the echo. In those circumstances,
the linear filter is scaled with the purpose of accelerating its
convergence.
Change-Id: I05ea3739d82838a6f08673432da92125c47943e0
Bug: webrtc:9466,chromium:857426
Reviewed-on: https://webrtc-review.googlesource.com/86133
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23789}
This CL removes the constraint that freezes the filter adaptation
whenever the estimated echo or the prediction error is saturated. This
allows for much more rapid filter recovery in cases where the echo path
gain for some reason changes, such as when the analog AGC gain is
adjusted or the loudspeaker volume is changed.
TBR: devicentepena@webrtc.org
Bug: webrtc:9466,chromium:857426
Change-Id: Ic0b3b03f41f12e9a607aaadd2ee91cbaa16cac52
Reviewed-on: https://webrtc-review.googlesource.com/86124
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23775}
This CL changes the behavior when the main filter diverges.
Instead of entering non-linear mode, the AEC continues to operate in
linear mode but estimates the residual echo differently. R2 is S2
scaled by a factor of 10.
Bug: chromium:857018,webrtc:9462
Change-Id: I41212efe164ad319cf38a163cdf9d3ea151e0997
Reviewed-on: https://webrtc-review.googlesource.com/85981
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23772}
The frequency shape of the echo path has been included in the reverberation model.
Bug: webrtc:9454,chromium:856636
Change-Id: Id2bc3096df31e29328936f94fe965ed1883d70f7
Reviewed-on: https://webrtc-review.googlesource.com/85370
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23746}
Running clang-format with chromium's style guide.
The goal is n-fold:
* providing consistency and readability (that's what code guidelines are for)
* preventing noise with presubmit checks and git cl format
* building on the previous point: making it easier to automatically fix format issues
* you name it
Please consider using git-hyper-blame to ignore this commit.
Bug: webrtc:9340
Change-Id: I694567c4cdf8cee2860958cfe82bfaf25848bb87
Reviewed-on: https://webrtc-review.googlesource.com/81185
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23660}
