Add test for vp8/vp9 qp parser in both videoprocessor_integrationtest.
Check the qp from parser equal to that from the encoder
on every frame in every test.
Add test for vp8/vp9 qp parser in vp8/vp9_impl_test.
Check the qp parser on a single key frame.
BUG=None
Review-Url: https://codereview.webrtc.org/2903163002
Cr-Commit-Position: refs/heads/master@{#18334}
- Add codec_type-implementation_name label option.
- Update figure title to exclude information that exist in legend.
- Change frame info in title from: # of frames in file -> # of processed frames.
BUG=webrtc:6634
Review-Url: https://codereview.webrtc.org/2890223002
Cr-Commit-Position: refs/heads/master@{#18209}
Prior to this CL, the encoding/decoding in the VideoProcessor integration
tests were run "online", in the sense that rate allocations could be
changed in between frames. This is useful for evaluating the rate control
of SW codecs, which is one of the reasons for the existence of these
integration tests in the first place.
This CL adds a batch mode, in which the tests are run "offline". The two
main differences to the original mode are: 1) rate control metrics are
calculated after the fact, and 2) no rate allocation changes are allowed
during the test. Difference 1) is the reason for this CL, as HW codecs
that are pipelining will not work well when rate control metrics are
calculated right after a frame has been sent for encode. Difference 2)
is a side effect of the introduction of the batch mode. If we want to
be able to support online rate allocation for pipelining HW codecs in
the future, this can be introduced by adding a delay between encoding
and rate allocation. This was not deemed necessary at this point in time,
and hence this CL does not do that.
The batch mode is only intended to be used for manual experimentation
on devices with HW codecs, and the integration tests running on the
bots should thus NOT use batch mode.
BUG=webrtc:6634
Review-Url: https://codereview.webrtc.org/2707023008
Cr-Commit-Position: refs/heads/master@{#17164}
This CL removes most of the global frame state in VideoProcessor and
replaces that with a vector of frame states. This is useful for pipelining
codecs, where the encoded/decoded frame may not be immediately outputted
after it has been sent to the codec.
The callers (VideoProcessorIntegrationTest and video_quality_measurement)
still call VideoProcessor in a sequential fashion. A follow-up CL will be
submitted that enables batch mode in VideoProcessorIntegrationTest.
Note that VideoProcessor is still not thread safe. Currently, we can run
fairly well on Android due to the synchronicity of our MediaCodec wrapper,
but we still cannot run on iOS due to async issues. This will be fixed in
the future.
BUG=webrtc:6634
Review-Url: https://codereview.webrtc.org/2711133002
Cr-Commit-Position: refs/heads/master@{#17084}
This CL is broken out from a future "real" CL, that introduces
support for pipelining HW codecs to VideoProcessor. I order to
simplify the reviewing of that CL a bit, some of the cleanups are
split out here.
No functional changes are intended.
BUG=webrtc::6634
Review-Url: https://codereview.webrtc.org/2709123004
Cr-Commit-Position: refs/heads/master@{#16909}
Reason for revert:
Necessary calls were "protected" by RTC_DCHECKs, that were optimized away in some release builds.
Replacing the RTC_DCHECKs with EXPECTs.
Original issue's description:
> Revert of Add optional visualization file writers to VideoProcessor tests. (patchset #4 id:220001 of https://codereview.webrtc.org/2700493006/ )
>
> Reason for revert:
> Breaks downstream project.
>
> Original issue's description:
> > Add optional visualization file writers to VideoProcessor tests.
> >
> > The purpose of this visualization CL is to add the ability to record
> > video at the source, after encode, and after decode, in the VideoProcessor
> > tests. These output files can then be replayed and used as a subjective
> > complement to the objective metric plots given by the existing Python
> > plotting script.
> >
> > BUG=webrtc:6634
> >
> > Review-Url: https://codereview.webrtc.org/2700493006
> > Cr-Commit-Position: refs/heads/master@{#16738}
> > Committed: 872104ac41
>
> TBR=asapersson@webrtc.org,sprang@webrtc.org,kjellander@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:6634
>
> Review-Url: https://codereview.webrtc.org/2708103002
> Cr-Commit-Position: refs/heads/master@{#16745}
> Committed: 2a8135a174TBR=asapersson@webrtc.org,sprang@webrtc.org,kjellander@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
BUG=webrtc:6634
Review-Url: https://codereview.webrtc.org/2706123003
Cr-Commit-Position: refs/heads/master@{#16769}
Reason for revert:
Breaks downstream project.
Original issue's description:
> Add optional visualization file writers to VideoProcessor tests.
>
> The purpose of this visualization CL is to add the ability to record
> video at the source, after encode, and after decode, in the VideoProcessor
> tests. These output files can then be replayed and used as a subjective
> complement to the objective metric plots given by the existing Python
> plotting script.
>
> BUG=webrtc:6634
>
> Review-Url: https://codereview.webrtc.org/2700493006
> Cr-Commit-Position: refs/heads/master@{#16738}
> Committed: 872104ac41TBR=asapersson@webrtc.org,sprang@webrtc.org,kjellander@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6634
Review-Url: https://codereview.webrtc.org/2708103002
Cr-Commit-Position: refs/heads/master@{#16745}
The purpose of this visualization CL is to add the ability to record
video at the source, after encode, and after decode, in the VideoProcessor
tests. These output files can then be replayed and used as a subjective
complement to the objective metric plots given by the existing Python
plotting script.
BUG=webrtc:6634
Review-Url: https://codereview.webrtc.org/2700493006
Cr-Commit-Position: refs/heads/master@{#16738}
This CL adds the ability to _create_ HW codecs (Android and iOS) in the
VideoProcessor integration tests. Since the VideoProcessor class is not thread
safe yet, this CL does not add the ability to _use_ HW codecs in the tests. A
follow-up CL is planned that will add this ability.
This CL further adds a separate build target which is used to separate the
"plot" versions of the integration tests from the "correctness" versions. The
former will be run manually on devices, whereas the latter are used on the
trybots/buildbots to find regressions in the SW codecs. The underlying test
is the same, however.
BUG=webrtc:6634
Review-Url: https://codereview.webrtc.org/2695653002
Cr-Commit-Position: refs/heads/master@{#16716}
Reason for revert:
Fix the problem.
Original issue's description:
> Revert of Add QP sum stats for received streams. (patchset #10 id:180001 of https://codereview.webrtc.org/2649133005/ )
>
> Reason for revert:
> Breaks downstream build.
>
> Original issue's description:
> > Add QP sum stats for received streams.
> >
> > This is not implemented yet in any of the decoders.
> >
> > BUG=webrtc:6541
> >
> > Review-Url: https://codereview.webrtc.org/2649133005
> > Cr-Commit-Position: refs/heads/master@{#16475}
> > Committed: ff0e72fd16
>
> TBR=hta@webrtc.org,hbos@webrtc.org,sprang@webrtc.org,magjed@webrtc.org,stefan@webrtc.org,sakal@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:6541
>
> Review-Url: https://codereview.webrtc.org/2680893002 .
> Cr-Commit-Position: refs/heads/master@{#16480}
> Committed: 69fb2cca4dTBR=hta@webrtc.org,hbos@webrtc.org,sprang@webrtc.org,magjed@webrtc.org,stefan@webrtc.org,skvlad@webrtc.org
BUG=webrtc:6541
Review-Url: https://codereview.webrtc.org/2681663005
Cr-Commit-Position: refs/heads/master@{#16511}
Reason for revert:
Breaks downstream build.
Original issue's description:
> Add QP sum stats for received streams.
>
> This is not implemented yet in any of the decoders.
>
> BUG=webrtc:6541
>
> Review-Url: https://codereview.webrtc.org/2649133005
> Cr-Commit-Position: refs/heads/master@{#16475}
> Committed: ff0e72fd16TBR=hta@webrtc.org,hbos@webrtc.org,sprang@webrtc.org,magjed@webrtc.org,stefan@webrtc.org,sakal@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6541
Review-Url: https://codereview.webrtc.org/2680893002 .
Cr-Commit-Position: refs/heads/master@{#16480}
This is not implemented yet in any of the decoders.
BUG=webrtc:6541
Review-Url: https://codereview.webrtc.org/2649133005
Cr-Commit-Position: refs/heads/master@{#16475}
Moves webrtc/common_video/rotation.h and parts of
webrtc/common_video/include/video_frame_buffer.h and
webrtc/video_frame.h, and adds to a new GN target api:video_frame_api.
BUG=webrtc:5880
Review-Url: https://codereview.webrtc.org/2517173004
Cr-Commit-Position: refs/heads/master@{#15993}
Reason for revert:
Crashes perf tests, e.g.,
./out/Debug/webrtc_perf_tests --gtest_filter='FullStackTest.ScreenshareSlidesVP8_2TL_VeryLossyNet'
dies with an assert related to rtc::Optional.
Original issue's description:
> Delete VideoFrame default constructor, and IsZeroSize method.
>
> This ensures that the video_frame_buffer method never can return a
> null pointer.
>
> BUG=webrtc:6591
>
> Committed: https://crrev.com/bfcf561923a42005e4c7d66d8e72e5932155f997
> Cr-Commit-Position: refs/heads/master@{#15574}
TBR=magjed@webrtc.org,stefan@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6591
Review-Url: https://codereview.webrtc.org/2574123002
Cr-Commit-Position: refs/heads/master@{#15597}
This ensures that the video_frame_buffer method never can return a
null pointer.
BUG=webrtc:6591
Review-Url: https://codereview.webrtc.org/2541863002
Cr-Commit-Position: refs/heads/master@{#15574}
This is yet another reland of https://codereview.webrtc.org/2434073003/
including two fixes:
1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that.
2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams.
Please review only the changes after patch set 1.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2510583002 .
Cr-Commit-Position: refs/heads/master@{#15105}
Reason for revert:
Seems to be causing flakiness in perf test:
FullStackTest.ScreenshareSlidesVP8_2TL_LossyNet
Original issue's description:
> Reland of Issue 2434073003: Extract bitrate allocation ...
>
> This is a reland of https://codereview.webrtc.org/2434073003/ including
> some fixes for failing test cases.
>
> Original description:
>
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/647bf43dcb2fd16fccf276bd94dc4400728bb405
> Cr-Commit-Position: refs/heads/master@{#15023}
TBR=mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2491393002
Cr-Commit-Position: refs/heads/master@{#15026}
This is a reland of https://codereview.webrtc.org/2434073003/ including
some fixes for failing test cases.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2488833004
Cr-Commit-Position: refs/heads/master@{#15023}
Reason for revert:
Breaks perf tests.
Original issue's description:
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/8f46c679d24a05b3f08e02c6d91ec9637f34e24f
> Cr-Commit-Position: refs/heads/master@{#14998}
TBR=stefan@webrtc.org,perkj@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2489843002
Cr-Commit-Position: refs/heads/master@{#15001}
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2434073003
Cr-Commit-Position: refs/heads/master@{#14998}
This change reduces the number of places where we first fread a I420
frame into a uint8_t buffer, followed by a copy into a frame buffer
object.
BUG=None
Review-Url: https://codereview.webrtc.org/2362683002
Cr-Commit-Position: refs/heads/master@{#14456}
Reason for revert:
broke browser_tests
Original issue's description:
> Add EncodedImageCallback::OnEncodedImage().
>
> OnEncodedImage() is going to replace Encoded(), which is deprecated now.
> The new OnEncodedImage() returns Result struct that contains frame_id,
> which tells the encoder RTP timestamp for the frame.
>
> BUG=chromium:621691
> R=niklas.enbom@webrtc.org, sprang@webrtc.org, stefan@webrtc.org
>
> Committed: https://crrev.com/4c7f4cd2ef76821edca6d773d733a924b0bedd25
> Committed: https://crrev.com/ad34dbe934d47f88011045671b4aea00dbd5a795
> Cr-Original-Commit-Position: refs/heads/master@{#13613}
> Cr-Commit-Position: refs/heads/master@{#13615}
TBR=pbos@webrtc.org,mflodman@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,niklas.enbom@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2203233002
Cr-Commit-Position: refs/heads/master@{#13616}
Reason for revert:
broke internal tests
Original issue's description:
> Add EncodedImageCallback::OnEncodedImage().
>
> OnEncodedImage() is going to replace Encoded(), which is deprecated now.
> The new OnEncodedImage() returns Result struct that contains frame_id,
> which tells the encoder RTP timestamp for the frame.
>
> BUG=chromium:621691
> R=niklas.enbom@webrtc.org, sprang@webrtc.org, stefan@webrtc.org
>
> Committed: https://crrev.com/ad34dbe934d47f88011045671b4aea00dbd5a795
> Cr-Commit-Position: refs/heads/master@{#13613}
TBR=pbos@webrtc.org,mflodman@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,niklas.enbom@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2206743002
Cr-Commit-Position: refs/heads/master@{#13614}
Introduce a new method I420Buffer::CropAndScale, and a static
convenience helper I420Buffer::CenterCropAndScale. Use them for almost
all scaling needs.
Delete the Scaler class and the cricket::VideoFrame::Stretch* methods.
BUG=webrtc:5682
R=pbos@webrtc.org, perkj@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2020593002 .
Cr-Commit-Position: refs/heads/master@{#13110}
It works on all platforms except Android and iOS (FFmpeg limitation).
Implemented behind compile time flags, off by default.
The plan is to have it enabled in Chrome (see bug), but not in Chromium/webrtc by default.
Flags to turn it on:
- rtc_use_h264 = true
- ffmpeg_branding = "Chrome" (or other brand that includes H.264 decoder)
Tests using H264:
- video_loopback --codec=H264
- screenshare_loopback --codec=H264
- video_engine_tests (EndToEndTest.SendsAndReceivesH264)
NOTRY=True
BUG=500605, 468365
BUG=https://bugs.chromium.org/p/webrtc/issues/detail?id=5424
Review URL: https://codereview.webrtc.org/1306813009
Cr-Commit-Position: refs/heads/master@{#11390}
The main purpose was the interface-> include rename, but other files
were also moved, eliminating the "main" dir.
To avoid breaking downstream, the "interface" directories were copied
into a new "video_coding/include" dir. The old headers got pragma
warnings added about deprecation (a very short deprecation since I plan
to remove them as soon downstream is updated).
Other files also moved:
video_coding/main/source -> video_coding
video_coding/main/test -> video_coding/test
BUG=webrtc:5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1417283007 .
Cr-Commit-Position: refs/heads/master@{#10694}
On Android, we would like to use MediaCodec output buffers to hold decoded frames until they can be rendered to a texture. There can only be one texture buffer used at the same time and therefore the calculated decode time in VCMTiming will be wrong since that calculation will also include the time where the decoder waited for the upper layers (that depend on network jitter and actual render time) to release the frame.
This new method will be used in
https://codereview.webrtc.org/1422963003/
BUG=webrtc:4993
R=stefan@webrtc.orgTBR=mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1414693006 .
Cr-Commit-Position: refs/heads/master@{#10576}
It is just a pass through to webrtc/video_frame.h. Updated the callers
to include webrtc/video_frame.h instead and removed i420_video_frame.h.
This should fix pbos' TODO in i420_video_frame.h.
Tested on Linux with the following command lines:
$ rm -rf out/
$ ./webrtc/build/gyp_webrtc
$ ninja -C out/Debug
BUG=None
TEST=see above
R=magjed@webrtc.org, pbos@webrtc.org, tommi@webrtc.orgTBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/46819004
Patch from Thiago Farina <tfarina@chromium.org>.
Cr-Commit-Position: refs/heads/master@{#8973}
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
