This is yet another reland of https://codereview.webrtc.org/2434073003/
including two fixes:
1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that.
2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams.
Please review only the changes after patch set 1.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2510583002 .
Cr-Commit-Position: refs/heads/master@{#15105}
This CL will start to distinguish H264 profiles during SDP negotiation.
We currently don't look at the H264 profile at all and assume they are
all Constrained Baseline Level 3.1. This CL will start to check profiles
for equality when matching, and will generate the correct answer H264
level.
Each local supported H264 profile needs to be listed explicitly in the
list of local supported codecs, even if they are redundant. For example,
Baseline profile should be listed explicitly even though another profile
that is a superset of Baseline is also listed. The reason for this is to
simplify the code and avoid profile intersection during matching. So
VideoCodec::Matches will check for profile equality, and not check if
one codec is a subset of the other. This also leads to the nice property
that VideoCodec::Matches is symmetric, i.e. iif a.Matches(b) then
b.Matches(a).
BUG=webrtc:6337
TBR=tkchin@webrtc.org
Review-Url: https://codereview.webrtc.org/2483173002
Cr-Commit-Position: refs/heads/master@{#15051}
Reason for revert:
Broke a lot of tests in chromium.webrtc browser_tests. See e.g. https://build.chromium.org/p/chromium.webrtc/builders/Mac%20Tester/builds/62228 and https://build.chromium.org/p/chromium.webrtc/builders/Win8%20Tester/builds/30102.
[ RUN ] WebRtcVideoQualityBrowserTests/WebRtcVideoQualityBrowserTest.MANUAL_TestVideoQualityH264/1
...
#
# Fatal error in e:\b\c\b\win_builder\src\third_party\webrtc\modules\rtp_rtcp\source\rtp_format_h264.cc, line 170
# last system error: 0
# Check failed: packetization_mode_ == kH264PacketizationMode1 (0 vs. 2)
#
Original issue's description:
> Implement H.264 packetization mode 0.
>
> This approach extends the H.264 specific information with
> a packetization mode enum.
>
> Status: Parameter is in code. No way to set it yet.
>
> Rebase of CL 2009213002
>
> BUG=600254
>
> Committed: https://crrev.com/3bba101f36483b8030a693dfbc93af736d1dba68
> Cr-Commit-Position: refs/heads/master@{#15032}
TBR=hbos@webrtc.org,sprang@webrtc.org,mflodman@webrtc.org,hta@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=600254
NOPRESUBMIT=true
Review-Url: https://codereview.webrtc.org/2500743002
Cr-Commit-Position: refs/heads/master@{#15050}
Reason for revert:
Relanding, now that downstream issues have been fixed.
Original issue's description:
> Revert of Declare VideoCodec.codec_specific_info private (patchset #5 id:80001 of https://codereview.webrtc.org/2452963002/ )
>
> Reason for revert:
> Broke a google3 build
>
> Original issue's description:
> > Declare VideoCodec.codec_specific_info private
> >
> > This completes the privatization of the codec specific
> > information in VideoCodec.
> >
> > BUG=webrtc:6603
> >
> > Committed: https://crrev.com/792738640234d81c916ac4458ac72286cb2548a4
> > Cr-Commit-Position: refs/heads/master@{#15013}
>
> TBR=tommi@chromium.org,magjed@chromium.org,tommi@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:6603
>
> Committed: https://crrev.com/7fe6db91d99cf6d43874651bcca56092cf869e2f
> Cr-Commit-Position: refs/heads/master@{#15027}
TBR=tommi@chromium.org,magjed@chromium.org,tommi@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6603
Review-Url: https://codereview.webrtc.org/2494683006
Cr-Commit-Position: refs/heads/master@{#15041}
Reason for revert:
Relanding after known downstream breakages have been fixed.
Original issue's description:
> Revert of Delete all use of cricket::VideoFrame and cricket::WebRtcVideoFrame. (patchset #7 id:120001 of https://codereview.webrtc.org/2383093002/ )
>
> Reason for revert:
> Breaks chrome, see https://build.chromium.org/p/chromium.webrtc.fyi/builders/Mac%20Builder/builds/19019/steps/compile/logs/stdio
>
> Analysis: Chrome uses cricket::VideoFrame, without explicitly including webrtc/media/base/videoframe.h, and breaks when that file is no longer included by any other webrtc headers. Will reland after updating Chrome.
>
> Original issue's description:
> > Delete all use of cricket::VideoFrame and cricket::WebRtcVideoFrame.
> >
> > Replaced with webrtc::VideoFrame.
> >
> > TBR=mflodman@webrtc.org
> > BUG=webrtc:5682
> >
> > Committed: https://crrev.com/45c8b8940042bd2574c39920804ade8343cefdba
> > Cr-Commit-Position: refs/heads/master@{#14885}
>
> TBR=perkj@webrtc.org,pthatcher@webrtc.org,tkchin@webrtc.org,mflodman@webrtc.org,stefan@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:5682
>
> Committed: https://crrev.com/7341ab8e2505c9763d208e069bda269018357e7d
> Cr-Commit-Position: refs/heads/master@{#14886}
TBR=perkj@webrtc.org,pthatcher@webrtc.org,tkchin@webrtc.org,mflodman@webrtc.org,stefan@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=webrtc:5682
Review-Url: https://codereview.webrtc.org/2487633002
Cr-Commit-Position: refs/heads/master@{#15039}
This approach extends the H.264 specific information with
a packetization mode enum.
Status: Parameter is in code. No way to set it yet.
Rebase of CL 2009213002
BUG=600254
Review-Url: https://codereview.webrtc.org/2337453002
Cr-Commit-Position: refs/heads/master@{#15032}
Reason for revert:
Broke a google3 build
Original issue's description:
> Declare VideoCodec.codec_specific_info private
>
> This completes the privatization of the codec specific
> information in VideoCodec.
>
> BUG=webrtc:6603
>
> Committed: https://crrev.com/792738640234d81c916ac4458ac72286cb2548a4
> Cr-Commit-Position: refs/heads/master@{#15013}
TBR=tommi@chromium.org,magjed@chromium.org,tommi@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6603
Review-Url: https://codereview.webrtc.org/2491933002
Cr-Commit-Position: refs/heads/master@{#15027}
Reason for revert:
Seems to be causing flakiness in perf test:
FullStackTest.ScreenshareSlidesVP8_2TL_LossyNet
Original issue's description:
> Reland of Issue 2434073003: Extract bitrate allocation ...
>
> This is a reland of https://codereview.webrtc.org/2434073003/ including
> some fixes for failing test cases.
>
> Original description:
>
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/647bf43dcb2fd16fccf276bd94dc4400728bb405
> Cr-Commit-Position: refs/heads/master@{#15023}
TBR=mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2491393002
Cr-Commit-Position: refs/heads/master@{#15026}
This is a reland of https://codereview.webrtc.org/2434073003/ including
some fixes for failing test cases.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2488833004
Cr-Commit-Position: refs/heads/master@{#15023}
This completes the privatization of the codec specific
information in VideoCodec.
BUG=webrtc:6603
Review-Url: https://codereview.webrtc.org/2452963002
Cr-Commit-Position: refs/heads/master@{#15013}
Reason for revert:
Breaks perf tests.
Original issue's description:
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/8f46c679d24a05b3f08e02c6d91ec9637f34e24f
> Cr-Commit-Position: refs/heads/master@{#14998}
TBR=stefan@webrtc.org,perkj@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2489843002
Cr-Commit-Position: refs/heads/master@{#15001}
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2434073003
Cr-Commit-Position: refs/heads/master@{#14998}
Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
These methods should no longer be used anywhere and it's safe to remove
them.
BUG=chromium:621691
Committed: https://crrev.com/c681250aaa2025836db7669694e323898e5c2ca7
Review-Url: https://codereview.webrtc.org/2405173006
Cr-Original-Commit-Position: refs/heads/master@{#14923}
Cr-Commit-Position: refs/heads/master@{#14935}
Reason for revert:
Still breaks internal downstream project.
Sergey: Please update internal project before relanding this.
Original issue's description:
> Remove deprected functions from EncodedImageCallback and RtpRtcp
>
> Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
> These methods should no longer be used anywhere and it's safe to remove
> them.
>
> BUG=chromium:621691
>
> Committed: https://crrev.com/c681250aaa2025836db7669694e323898e5c2ca7
> Cr-Commit-Position: refs/heads/master@{#14923}
TBR=mflodman@webrtc.org,stefan@webrtc.org,sergeyu@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2479643002
Cr-Commit-Position: refs/heads/master@{#14925}
Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
These methods should no longer be used anywhere and it's safe to remove
them.
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2405173006
Cr-Commit-Position: refs/heads/master@{#14923}
Reason for revert:
Breaks everything
Original issue's description:
> Revert of Remove deprected functions from EncodedImageCallback and RtpRtcp (patchset #4 id:100001 of https://codereview.webrtc.org/2405173006/ )
>
> Reason for revert:
> This might be breaking projects downstream.
>
> Original issue's description:
> > Remove deprected functions from EncodedImageCallback and RtpRtcp
> >
> > Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
> > These methods should no longer be used anywhere and it's safe to remove
> > them.
> >
> > BUG=chromium:621691
> >
> > Committed: https://crrev.com/fa565842718ad178a7562721b25d916fbabc2b92
> > Cr-Commit-Position: refs/heads/master@{#14902}
>
> TBR=mflodman@webrtc.org,stefan@webrtc.org,sergeyu@chromium.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=chromium:621691
>
> Committed: https://crrev.com/6c78307a21252c2dbd704f6d5e92a220fb722ed4
> Cr-Commit-Position: refs/heads/master@{#14914}
TBR=mflodman@webrtc.org,stefan@webrtc.org,sergeyu@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2467373003
Cr-Commit-Position: refs/heads/master@{#14915}
Reason for revert:
This might be breaking projects downstream.
Original issue's description:
> Remove deprected functions from EncodedImageCallback and RtpRtcp
>
> Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
> These methods should no longer be used anywhere and it's safe to remove
> them.
>
> BUG=chromium:621691
>
> Committed: https://crrev.com/fa565842718ad178a7562721b25d916fbabc2b92
> Cr-Commit-Position: refs/heads/master@{#14902}
TBR=mflodman@webrtc.org,stefan@webrtc.org,sergeyu@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2474433008
Cr-Commit-Position: refs/heads/master@{#14914}
Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
These methods should no longer be used anywhere and it's safe to remove
them.
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2405173006
Cr-Commit-Position: refs/heads/master@{#14902}
Reason for revert:
Breaks chrome, see https://build.chromium.org/p/chromium.webrtc.fyi/builders/Mac%20Builder/builds/19019/steps/compile/logs/stdio
Analysis: Chrome uses cricket::VideoFrame, without explicitly including webrtc/media/base/videoframe.h, and breaks when that file is no longer included by any other webrtc headers. Will reland after updating Chrome.
Original issue's description:
> Delete all use of cricket::VideoFrame and cricket::WebRtcVideoFrame.
>
> Replaced with webrtc::VideoFrame.
>
> TBR=mflodman@webrtc.org
> BUG=webrtc:5682
>
> Committed: https://crrev.com/45c8b8940042bd2574c39920804ade8343cefdba
> Cr-Commit-Position: refs/heads/master@{#14885}
TBR=perkj@webrtc.org,pthatcher@webrtc.org,tkchin@webrtc.org,mflodman@webrtc.org,stefan@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5682
Review-Url: https://codereview.webrtc.org/2471783002
Cr-Commit-Position: refs/heads/master@{#14886}
This CL introduces two new functions to the WebRtcVideoEncoderFactory
interface based on cricket::VideoFormat instead of
WebRtcVideoEncoderFactory::VideoCodec. The functions are:
WebRtcVideoEncoderFactory::CreateVideoEncoder() and
WebRtcVideoEncoderFactory::supported_codecs(). In order to make a smooth
transition to the new interface, the old functions are kept, and default
implementations are provided for both the old and new functions so that
external clients can switch from the old to the new functions in peace.
The default implementations will just convert between
cricket::VideoFormat and WebRtcVideoEncoderFactory::VideoCodec. Once all
external clients have updated their code, the plan is to remove the old
functions and all default implementations to make
WebRtcVideoEncoderFactory a pure interface again.
BUG=webrtc:6402,webrtc:6337
Review-Url: https://codereview.webrtc.org/2449993003
Cr-Commit-Position: refs/heads/master@{#14826}
On some recent Android devices camera switch is completed in 400 ms.
Need to adjust key frame generation threshold to ensure HW encoder
still generates a key frame after camera switch to workaround video
distortions.
BUG=b/32238476
Review-Url: https://codereview.webrtc.org/2447163003
Cr-Commit-Position: refs/heads/master@{#14791}
Reason for revert:
Internal project has been fixed
Original issue's description:
> Revert of Move bitstream parser to more appropriate directory. (patchset #4 id:60001 of https://codereview.webrtc.org/2370853005/ )
>
> Reason for revert:
> Breaks internal project
>
> Original issue's description:
> > Move current bitstream parser to more appropriate directory.
> >
> > This CL groups together the code that has to do with parsing H264 bitstreams.
> > This code logically belongs together, and having it in the same directory not
> > only simplifies things from a project structure perspective, but also makes it
> > easier to refactor out common parts incrementally.
> > An added benefit is that this simplifies modular compilation, where for example
> > one would like a build of WebRTC without the H264 codec-specific parts.
> >
> > BUG=webrtc:6338
> >
> > Committed: https://crrev.com/cc6817e9ce4a5ffc73efb660cf0368afbc7d9a4f
> > Cr-Commit-Position: refs/heads/master@{#14684}
>
> TBR=magjed@webrtc.org,stefan@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:6338
>
> Committed: https://crrev.com/f04f14e772f803de39f8a6128e5157127cd35103
> Cr-Commit-Position: refs/heads/master@{#14685}
TBR=magjed@webrtc.org,stefan@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6338
Review-Url: https://codereview.webrtc.org/2434043002
Cr-Commit-Position: refs/heads/master@{#14783}
Reason for revert:
Breaks internal project
Original issue's description:
> Move current bitstream parser to more appropriate directory.
>
> This CL groups together the code that has to do with parsing H264 bitstreams.
> This code logically belongs together, and having it in the same directory not
> only simplifies things from a project structure perspective, but also makes it
> easier to refactor out common parts incrementally.
> An added benefit is that this simplifies modular compilation, where for example
> one would like a build of WebRTC without the H264 codec-specific parts.
>
> BUG=webrtc:6338
>
> Committed: https://crrev.com/cc6817e9ce4a5ffc73efb660cf0368afbc7d9a4f
> Cr-Commit-Position: refs/heads/master@{#14684}
TBR=magjed@webrtc.org,stefan@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6338
Review-Url: https://codereview.webrtc.org/2430353004
Cr-Commit-Position: refs/heads/master@{#14685}
This CL groups together the code that has to do with parsing H264 bitstreams.
This code logically belongs together, and having it in the same directory not
only simplifies things from a project structure perspective, but also makes it
easier to refactor out common parts incrementally.
An added benefit is that this simplifies modular compilation, where for example
one would like a build of WebRTC without the H264 codec-specific parts.
BUG=webrtc:6338
Review-Url: https://codereview.webrtc.org/2370853005
Cr-Commit-Position: refs/heads/master@{#14684}
YuvConverter is complex class that deserves its own file. It is also used outside of SurfaceTextureHelper.
BUG=webrtc:6470
R=sakal@webrtc.org
Review URL: https://codereview.webrtc.org/2426023002 .
Cr-Commit-Position: refs/heads/master@{#14683}
Reason for revert:
Breaks internal project.
Original issue's description:
> Support for video file instead of camera and output video out to file
>
> When video out to file is enabled the remote video which is recorded is
> not show on screen.
>
> You can use this command line for file input and output:
> monkeyrunner ./webrtc/examples/androidapp/start_loopback_stubbed_camera_saved_video_out.py --devname 02157df28cd47001 --videoin /storage/emulated/0/reference_video_1280x720_30fps.y4m --videoout /storage/emulated/0/output.y4m --videoout_width 1280 --videoout_height 720 --videooutsave /tmp/out.y4m
>
> BUG=webrtc:6545
>
> Committed: https://crrev.com/44666997ca912705f8f96c9bd211e719525a3ccc
> Cr-Commit-Position: refs/heads/master@{#14660}
TBR=magjed@webrtc.org,sakal@webrtc.org,jansson@chromium.org,mandermo@google.com,mandermo@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6545
Review-Url: https://codereview.webrtc.org/2425763003
Cr-Commit-Position: refs/heads/master@{#14664}
When video out to file is enabled the remote video which is recorded is
not show on screen.
You can use this command line for file input and output:
monkeyrunner ./webrtc/examples/androidapp/start_loopback_stubbed_camera_saved_video_out.py --devname 02157df28cd47001 --videoin /storage/emulated/0/reference_video_1280x720_30fps.y4m --videoout /storage/emulated/0/output.y4m --videoout_width 1280 --videoout_height 720 --videooutsave /tmp/out.y4m
BUG=webrtc:6545
Review-Url: https://codereview.webrtc.org/2273573003
Cr-Commit-Position: refs/heads/master@{#14660}
This should allow us to enable Intel HW VP8 encoder again.
BUG=webrtc:6232,b/30947951
Review-Url: https://codereview.webrtc.org/2263043003
Cr-Commit-Position: refs/heads/master@{#14552}
Changing this constant has been empirically proven to solve the issue.
BUG=webrtc:6455,b/31827852
Review-Url: https://codereview.webrtc.org/2382733006
Cr-Commit-Position: refs/heads/master@{#14479}
Remove onOutputFormatRequest from the VideoCapturer interface and from
all implementations of that interface. Apps should now use
VideoSource.adaptOutputFormat() instead.
BUG=webrtc:6391
Review-Url: https://codereview.webrtc.org/2373353002
Cr-Commit-Position: refs/heads/master@{#14428}
Also provide a new set of thresholds for the VideoToolbox encoder. The new thresholds were experimentally determined to work well on the iPhone 6S, and also adequately on the iPhone 5S.
BUG=webrtc:5678
Review-Url: https://codereview.webrtc.org/2309743002
Cr-Commit-Position: refs/heads/master@{#14420}
The Java VideoSource class wraps the C++ AndroidVideoTrackSource.
AndroidVideoTrackSource is the object actually owning the VideoAdapter.
We currently control the VideoAdapter through the Java VideoCapturer,
but it is more natural and direct to control it through the Java
VideoSource class. This CL adds the necessary function to do this, and
the function in VideoCapturer is deprecated.
BUG=webrtc:6391
R=sakal@webrtc.org
Review URL: https://codereview.webrtc.org/2350933006 .
Cr-Commit-Position: refs/heads/master@{#14332}
This name is only used for a DCHECK. Having it as a parameter leads to unnecessary string copying even on release builds.
This CL instead adds a GetHistogramName function that is only called on debug builds.
Checking if pointer is null is also moved outside HistogramAdd function. Having it there is confusing since Chromium implementation doesn't have it there.
BUG=webrtc:6329
Review-Url: https://codereview.webrtc.org/2337883003
Cr-Commit-Position: refs/heads/master@{#14263}
I have written a large part of the code in these files and I feel I
should be an OWNER of them.
NOTRY=True
Review-Url: https://codereview.webrtc.org/2322983002
Cr-Commit-Position: refs/heads/master@{#14148}
Only has counts stats right now but enumeration stats can easily be added in the future if needed.
BUG=webrtc:6313
Review-Url: https://codereview.webrtc.org/2320473002
Cr-Commit-Position: refs/heads/master@{#14146}
These methods are not used by the new AndroidVideoTrackSource API.
Review-Url: https://codereview.webrtc.org/2280873002
Cr-Commit-Position: refs/heads/master@{#14036}
