The AGC is currently bumping up the mic volume to 33% at startup if it is below that level. This is to avoid getting stuck in a poor state from which the AGC can not move, simply a too low input audio level. For some users, 33% is instead too loud.
This CL gives the user the possibility to set that level at create time.
- Extends the Config ExperimentalAgc with a startup_mic_volume for the user to set if desired. Note that the bump up does not apply to the legacy AGC and the "regular" AGC is controlled by ExperimentalAgc.
- Without any actions, the same default value as previously is used.
- In addition I removed a return value from InitializeExperimentalAgc() and InitializeTransient()
This has been tested by building Chromium on Mac and verify through apprtc that
1) startup_mic_volume = 128 bumps up to 50%.
2) startup_mic_volume = 500 (out of range) bumps up to 100%.
3) startup_mic_volume = 0 bumps up to 4%, the AGC min level.
BUG=4529
TESTED=locally
R=andrew@webrtc.org, kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43109004
Cr-Commit-Position: refs/heads/master@{#9004}
There is no point in returning an error when Free() fails. In fact it can only happen if we have a null pointer as object. There is further no place where the return value is used.
Affected components are
- aec
- aecm
- agc
- ns
BUG=441
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/50579004
Cr-Commit-Position: refs/heads/master@{#8966}
We are using the Ooura FFT in a few places:
- AGC
- Transient suppression
- Noise suppression
The optimized OpenMAX DL FFT is considerably faster, but currently does
not compile everywhere, notably on iOS. This change will allow us to use
Openmax when possible and otherwise fall back to Ooura.
(Unfortunately, noise suppression won't be able to take advantage of it
since it's not C++. Upgrade time?)
R=aluebs@webrtc.org, mgraczyk@chromium.org
Review URL: https://webrtc-codereview.appspot.com/45789004
Cr-Commit-Position: refs/heads/master@{#8798}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8798 4adac7df-926f-26a2-2b94-8c16560cd09d
The macro is defined as
#define WEBRTC_SPL_MUL_16_16_RSFT(a, b, c) \
(WEBRTC_SPL_MUL_16_16(a, b) >> (c))
where the latter macro is in C defined as
#define WEBRTC_SPL_MUL_16_16(a, b) \
((int32_t) (((int16_t)(a)) * ((int16_t)(b))))
(For definitions on ARMv7 and MIPS, see common_audio/signal_processing/include/spl_inl_{armv7,mips}.h)
The replacement consists of
- avoiding casts to int16_t if inputs already are int16_t
- adding explicit cast to <type> if result is assigned to <type> (other than int or int32_t)
- minor cleanups like remove of unnecessary parentheses and style changes
BUG=3348,3353
TESTED=locally on Mac and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47449004
Cr-Commit-Position: refs/heads/master@{#8664}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8664 4adac7df-926f-26a2-2b94-8c16560cd09d
Changes differing from https://webrtc-codereview.appspot.com/37859004:
* I put the include_tests==1 stuff of audio_coding.gypi in its
own audio_coding_tests.gypi file, including the Android and isolate
targets which were incorrectly located in the previous CL
* I moved the bwe utilities in remote_bitrate_estimator.gypi
into include_tests==1 since they depend on test.gyp after I
cleaned up the duplicated inclusion of rtp_file_reader.cc
R=stefan@webrtc.orgTBR=tina.legrand@webrtc.org
TESTED=Passing gyp and compile using:
webrtc/build/gyp_webrtc -Dinclude_tests=1
webrtc/build/gyp_webrtc -Dinclude_tests=0
I also setup a Chromium checkout with my checkout mounted in
third_party/webrtc and ran build/gyp_chromium successfully.
BUG=4185
Review URL: https://webrtc-codereview.appspot.com/33159004
Cr-Commit-Position: refs/heads/master@{#8205}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8205 4adac7df-926f-26a2-2b94-8c16560cd09d
This required to move the AGC tools source files
into webrtc/tools and create a new agc_test_utils target.
Since audio_codec_speed_tests.gypi referenced sources above,
the best approach I could come up with was to add an audio_coding.gypi
file at a higher level and move the targets in there (+ the includes from
modules.gyp which is an improvement IMO).
I also added a PRESUBMIT.py check to prevent new source
entries being added with <(webrtc_root) in the path.
BUG=4185
R=andrew@webrtc.org, tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37859004
Cr-Commit-Position: refs/heads/master@{#8197}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8197 4adac7df-926f-26a2-2b94-8c16560cd09d
The macro is in C defined as
#define WEBRTC_SPL_MUL_16_16(a, b) ((int32_t) (((int16_t)(a)) * ((int16_t)(b))))
(For definition on ARMv7 and MIPS, see common_audio/signal_processing/include/spl_inl_armv7.h and common_audio/signal_processing/include/spl_inl_mips.h)
The replacement consists of
- avoiding casts to int16_t if inputs already are int16_t
- adding explicit cast to <type> if result is assigned to <type> (other than int or int32_t)
BUG=3348, 3353
TESTED=locally on Mac and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/39389004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8023 4adac7df-926f-26a2-2b94-8c16560cd09d
The implementation of WEBRTC_SPL_RSHIFT_W16 is simply >>. This CL removes the macro usage in audio_processing and signal_processing.
Affected components:
* aecm
* agc
* nsx
Indirectly affecting (through signal_processing changes)
* codecs/cng
* codecs/isac/fix
* codecs/isac/main
BUG=3348,3353
TESTED=locally on Linux and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/28699005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7432 4adac7df-926f-26a2-2b94-8c16560cd09d
webrtc did not build if AGC_DEBUG was turned on. This CL fixes that. Has no impact on performance since it is development/debug code.
* Name change to WEBRT_AGC_DEBUG_DUMP
* Added build flag agc_debug_dump to .gypi
* Added missing "%d" in printf at two places
* Some line length related style changes
Tested audioproc and modules_unittests with GYP_DEFINES=agc_debug_dump=1 webrtc/build/gyp_webrtc
BUG=N/A
TESTED=locally and trybots
R=aluebs@webrtc.org, kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/31429004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7271 4adac7df-926f-26a2-2b94-8c16560cd09d
The macro replaced is a trivial multiplication after explicit casts to uint16_t and uint32_t. This CL replaces its use with "*" and adds explicit casts if necessary.
Affected components:
* AECMobile
* AGC
* Noise Suppression (fixed point version)
BUG=3348,3353
TESTED=locally on linux and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/27389004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7101 4adac7df-926f-26a2-2b94-8c16560cd09d
---
Fixes for re-enabling more MSVC level 4 warnings: webrtc/ edition
This contains fixes for the following sorts of issues:
* Possibly-uninitialized local variable
* Signedness mismatch
* Assignment inside conditional
This also contains a small number of other cleanups to nearby code. In
particular several warning-disables for MSVC are removed because they don't seem
to be necessary (either that warning is not enabled or the code does not trigger
it).
BUG=crbug.com/81439
TEST=none
R=henrika@webrtc.org, pkasting@chromium.org
Review URL: https://webrtc-codereview.appspot.com/18769004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6667 4adac7df-926f-26a2-2b94-8c16560cd09d
Voice engine shouldn't really have to manage this. Instead, have AGC
keep track of the last input volume, so that it can avoid getting stuck
under coarsely quantized conditions.
Add a test to verify the behavior.
TESTED=unittests, and observed that AGC didn't get stuck on a MacBook
where this problem can actually occur.
R=bjornv@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/8729004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5571 4adac7df-926f-26a2-2b94-8c16560cd09d
