The AGC is currently bumping up the mic volume to 33% at startup if it is below that level. This is to avoid getting stuck in a poor state from which the AGC can not move, simply a too low input audio level. For some users, 33% is instead too loud.
This CL gives the user the possibility to set that level at create time.
- Extends the Config ExperimentalAgc with a startup_mic_volume for the user to set if desired. Note that the bump up does not apply to the legacy AGC and the "regular" AGC is controlled by ExperimentalAgc.
- Without any actions, the same default value as previously is used.
- In addition I removed a return value from InitializeExperimentalAgc() and InitializeTransient()
This has been tested by building Chromium on Mac and verify through apprtc that
1) startup_mic_volume = 128 bumps up to 50%.
2) startup_mic_volume = 500 (out of range) bumps up to 100%.
3) startup_mic_volume = 0 bumps up to 4%, the AGC min level.
BUG=4529
TESTED=locally
R=andrew@webrtc.org, kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43109004
Cr-Commit-Position: refs/heads/master@{#9004}
There is no point in returning an error when Free() fails. In fact it can only happen if we have a null pointer as object. There is further no place where the return value is used.
Affected components are
- aec
- aecm
- agc
- ns
BUG=441
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/50579004
Cr-Commit-Position: refs/heads/master@{#8966}
Now that android_webview_build is no longer supported, remove build
conditionals referencing it and also remove the extra level of
indirection used to reference the cpufeatures target.
BUG=chromium:440793
R=henrika@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/44119005
Patch from Richard Coles <torne@chromium.org>.
Cr-Commit-Position: refs/heads/master@{#8963}
Setting the member value output_will_be_muted_ in set_output_will_be_muted() was done before the lock.
This caused a data race.
BUG=4477
R=pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/44929004
Cr-Commit-Position: refs/heads/master@{#8877}
If built-in Echo Cancellation is available on a device it is automatically enabled. The reason is that it in most cases performs better than the WebRTC software echo control for mobile. The drawback is that we can not develop, test and rollout the delay agnostic AEC (DA-AEC) on Android as for desktops.
This CL includes
- adding a media constraint to enable/disable DA-AEC.
- automatically turning on echo cancellation if DA-AEC is enabled.
- a fix in the AEC that enables delay estimation when DA-AEC is enabled, but delay metrics is disabled.
- sets the Config struct ReportedDelay, which controls DA-AEC internally in the AEC.
The test code to verify that it works in AppRTCDemo can be found here:
https://webrtc-codereview.appspot.com/50479004/
BUG=4472
TESTED=locally on N7, N6, Android One
R=glaznev@webrtc.org, perkj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/48699004
Cr-Commit-Position: refs/heads/master@{#8861}
We are using the Ooura FFT in a few places:
- AGC
- Transient suppression
- Noise suppression
The optimized OpenMAX DL FFT is considerably faster, but currently does
not compile everywhere, notably on iOS. This change will allow us to use
Openmax when possible and otherwise fall back to Ooura.
(Unfortunately, noise suppression won't be able to take advantage of it
since it's not C++. Upgrade time?)
R=aluebs@webrtc.org, mgraczyk@chromium.org
Review URL: https://webrtc-codereview.appspot.com/45789004
Cr-Commit-Position: refs/heads/master@{#8798}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8798 4adac7df-926f-26a2-2b94-8c16560cd09d
- Remove unnecessary window member from lapped_transform.
- Add comment indicated that Blocker does not take ownership of
the window passed to its constructor.
- Streamline LappedTransform constructor so members can be const.
Also use a range-based for loop in audio_processing_impl.cc for clarity.
R=aluebs@webrtc.org, andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41229004
Cr-Commit-Position: refs/heads/master@{#8708}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8708 4adac7df-926f-26a2-2b94-8c16560cd09d
The macro is defined as
#define WEBRTC_SPL_MUL_16_16_RSFT(a, b, c) \
(WEBRTC_SPL_MUL_16_16(a, b) >> (c))
where the latter macro is in C defined as
#define WEBRTC_SPL_MUL_16_16(a, b) \
((int32_t) (((int16_t)(a)) * ((int16_t)(b))))
(For definitions on ARMv7 and MIPS, see common_audio/signal_processing/include/spl_inl_{armv7,mips}.h)
The replacement consists of
- avoiding casts to int16_t if inputs already are int16_t
- adding explicit cast to <type> if result is assigned to <type> (other than int or int32_t)
- minor cleanups like remove of unnecessary parentheses and style changes
BUG=3348,3353
TESTED=Locally on Mac and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41149004
Cr-Commit-Position: refs/heads/master@{#8666}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8666 4adac7df-926f-26a2-2b94-8c16560cd09d
The macro is defined as
#define WEBRTC_SPL_MUL_16_16_RSFT(a, b, c) \
(WEBRTC_SPL_MUL_16_16(a, b) >> (c))
where the latter macro is in C defined as
#define WEBRTC_SPL_MUL_16_16(a, b) \
((int32_t) (((int16_t)(a)) * ((int16_t)(b))))
(For definitions on ARMv7 and MIPS, see common_audio/signal_processing/include/spl_inl_{armv7,mips}.h)
The replacement consists of
- avoiding casts to int16_t if inputs already are int16_t
- adding explicit cast to <type> if result is assigned to <type> (other than int or int32_t)
- minor cleanups like remove of unnecessary parentheses and style changes
In addition an implicit cast from int32_t to int16_t was removed, which was a bug.
BUG=3348,3353
TESTED=Locally on Mac and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41169004
Cr-Commit-Position: refs/heads/master@{#8665}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8665 4adac7df-926f-26a2-2b94-8c16560cd09d
The macro is defined as
#define WEBRTC_SPL_MUL_16_16_RSFT(a, b, c) \
(WEBRTC_SPL_MUL_16_16(a, b) >> (c))
where the latter macro is in C defined as
#define WEBRTC_SPL_MUL_16_16(a, b) \
((int32_t) (((int16_t)(a)) * ((int16_t)(b))))
(For definitions on ARMv7 and MIPS, see common_audio/signal_processing/include/spl_inl_{armv7,mips}.h)
The replacement consists of
- avoiding casts to int16_t if inputs already are int16_t
- adding explicit cast to <type> if result is assigned to <type> (other than int or int32_t)
- minor cleanups like remove of unnecessary parentheses and style changes
BUG=3348,3353
TESTED=locally on Mac and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47449004
Cr-Commit-Position: refs/heads/master@{#8664}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8664 4adac7df-926f-26a2-2b94-8c16560cd09d
The known clients (GetStats and UMA histogram in Chrome) use at least 5 second aggregation window. There is no particular value in calculating the metrics more often.
The CL also includes a small refactoring moving a declaration inside an if statement.
BUG=2994
TEST=N/A
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/40219004
Cr-Commit-Position: refs/heads/master@{#8619}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8619 4adac7df-926f-26a2-2b94-8c16560cd09d
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
There exist devices with runtime checks for NEON, but where the device is not NEON. One such device is Tegra2 on which currently NEON code is running.
This fix adds a missing feature check when initializing the AEC.
BUG=4304
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42159004
Cr-Commit-Position: refs/heads/master@{#8559}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8559 4adac7df-926f-26a2-2b94-8c16560cd09d
Mostly, it's about moving constructors and descructors to the .cc
files, so that they won't be inlined everywhere.
The reason this CL is so big is that a lot of code was using
common_types.h without declaring a dependency on webrtc_common, which
broke the build once common_types.h started to depend on
common_types.cc.
BUG=163
R=kjellander@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/26089004
Cr-Commit-Position: refs/heads/master@{#8516}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8516 4adac7df-926f-26a2-2b94-8c16560cd09d
* Don't use ConjugateDotProduct to calculate the norm.
* Only resize Matrix when needed.
This makes the Beamformer run in 93.6% the original time.
The error between the new and original output is really small and is caused by the new norm calculation.
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37339004
Cr-Commit-Position: refs/heads/master@{#8438}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8438 4adac7df-926f-26a2-2b94-8c16560cd09d
There are only 2 things that prevent the output to be bit-exact:
* The zero initialization of the postfilter_mask_ and high_pass_postfilter_mask_, which only afects the first blocks.
* The re-tuning of the target presence estimation, since only the bins between low_average_start_bin_ and high_average_end_bin_ are of interest.
This latter was not taken into account before.
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/35139004
Cr-Commit-Position: refs/heads/master@{#8368}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8368 4adac7df-926f-26a2-2b94-8c16560cd09d
Now the ChannelBuffer has 2 separate arrays, one for the full-band data and one for the splitted one. The corresponding accessors are added to the ChannelBuffer.
This is done to avoid having to refresh the bands pointers in AudioBuffer. It will also allow us to have a general accessor like data()[band][channel][sample].
All the files using the ChannelBuffer needed to be re-factored.
Tested with modules_unittests, common_audio_unittests, audioproc, audioproc_f, voe_cmd_test.
R=andrew@webrtc.org, kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/36999004
Cr-Commit-Position: refs/heads/master@{#8318}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8318 4adac7df-926f-26a2-2b94-8c16560cd09d
Previously only mic level calculated by the legacy agc was logged in aecdebug dumps.
Now we log it for any agc.
In addition, it is now possible to turn on and off debug recording in the test tool voe_cmd_test.
BUG=4274
TESTED=verified using voe_cmd_test
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/39839004
Cr-Commit-Position: refs/heads/master@{#8274}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8274 4adac7df-926f-26a2-2b94-8c16560cd09d
To more easily determine if for example the AEC is not working properly one could monitor how often the estimated delay is out of bounds. With out of bounds we mean either being negative or too large, where both cases will break the AEC.
A new delay metric is added telling the user how often poor delay values were estimated. This is measured in percentage since last time the metrics were calculated.
All APIs have been updated with a third parameter with EchoCancellation::GetDelayMetrics() giving the option to exclude the new metric not to break existing code.
The new metric has been added to audio_processing_unittests with an additional protobuf member, and reference files accordingly updated.
voe_auto_test has not been updated to display the new metric.
BUG=4246
TESTED=audioproc on files
R=aluebs@webrtc.org, andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/39739004
Cr-Commit-Position: refs/heads/master@{#8230}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8230 4adac7df-926f-26a2-2b94-8c16560cd09d
Changes differing from https://webrtc-codereview.appspot.com/37859004:
* I put the include_tests==1 stuff of audio_coding.gypi in its
own audio_coding_tests.gypi file, including the Android and isolate
targets which were incorrectly located in the previous CL
* I moved the bwe utilities in remote_bitrate_estimator.gypi
into include_tests==1 since they depend on test.gyp after I
cleaned up the duplicated inclusion of rtp_file_reader.cc
R=stefan@webrtc.orgTBR=tina.legrand@webrtc.org
TESTED=Passing gyp and compile using:
webrtc/build/gyp_webrtc -Dinclude_tests=1
webrtc/build/gyp_webrtc -Dinclude_tests=0
I also setup a Chromium checkout with my checkout mounted in
third_party/webrtc and ran build/gyp_chromium successfully.
BUG=4185
Review URL: https://webrtc-codereview.appspot.com/33159004
Cr-Commit-Position: refs/heads/master@{#8205}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8205 4adac7df-926f-26a2-2b94-8c16560cd09d
This required to move the AGC tools source files
into webrtc/tools and create a new agc_test_utils target.
Since audio_codec_speed_tests.gypi referenced sources above,
the best approach I could come up with was to add an audio_coding.gypi
file at a higher level and move the targets in there (+ the includes from
modules.gyp which is an improvement IMO).
I also added a PRESUBMIT.py check to prevent new source
entries being added with <(webrtc_root) in the path.
BUG=4185
R=andrew@webrtc.org, tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37859004
Cr-Commit-Position: refs/heads/master@{#8197}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8197 4adac7df-926f-26a2-2b94-8c16560cd09d
Previously, the delay estimate history was reset every time the metrics were pulled. This required all clients to be on the same thread and make use of one call.
Now we use a fixed aggregation window of one second and when a client pulls the metrics you get the latest value.
Under certain circumstances like tests you would like to have the aggregation window set to the recording length. We therefore turn on the fixed aggregation window after the first call.
BUG=2994
TESTED=locally on Mac and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/38759004
Cr-Commit-Position: refs/heads/master@{#8170}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8170 4adac7df-926f-26a2-2b94-8c16560cd09d
