This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2434073003
Cr-Commit-Position: refs/heads/master@{#14998}
"WebRTC.Video.EndToEndDelayInMs"
Make capture time in local timebase available for decoded VP9 video frames (propagate ntp_time_ms from EncodedImage to decoded VideoFrame).
BUG=webrtc:6409
Review-Url: https://codereview.webrtc.org/1905563002
Cr-Commit-Position: refs/heads/master@{#14367}
Reason for revert:
The delay stats are high.
Original issue's description:
> Update histogram "WebRTC.Video.OnewayDelayInMs" to use the estimated one-way delay.
> Previous logged delay was: network delay (rtt/2) + jitter delay + decode time + render delay.
>
> Make capture time in local timebase available for decoded VP9 video frames (propagate ntp_time_ms from EncodedImage to decoded VideoFrame).
>
> BUG=
>
> Committed: https://crrev.com/5249599a9b69ad9c2d513210d694719f1011f977
> Cr-Commit-Position: refs/heads/master@{#11901}
TBR=stefan@webrtc.org,pbos@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=chromium:603838
Review URL: https://codereview.webrtc.org/1893543003
Cr-Commit-Position: refs/heads/master@{#12400}
Previous logged delay was: network delay (rtt/2) + jitter delay + decode time + render delay.
Make capture time in local timebase available for decoded VP9 video frames (propagate ntp_time_ms from EncodedImage to decoded VideoFrame).
BUG=
Review URL: https://codereview.webrtc.org/1688143003
Cr-Commit-Position: refs/heads/master@{#11901}
Reason for revert:
Failed test not related to this CL (test fails on
master at an earlier date), re-landing original CL..
(This time from my @webrtc account.)
Original issue's description:
> Revert of Work on flexible mode and screen sharing. (patchset #28 id:520001 of https://codereview.webrtc.org/1328113004/ )
>
> Reason for revert:
> Seems to break VideoSendStreamTest.ReconfigureBitratesSetsEncoderBitratesCorrectly on Linux Memcheck buildbot.
>
> Original issue's description:
> > Work on flexible mode and screen sharing.
> >
> > Implement VP8 style screensharing but with spatial layers.
> > Implement flexible mode.
> >
> > Files from other patches:
> > generic_encoder.cc
> > layer_filtering_transport.cc
> >
> > BUG=webrtc:4914
> >
> > Committed: https://crrev.com/77ccfb4d16c148e61a316746bb5d9705e8b39f4a
> > Cr-Commit-Position: refs/heads/master@{#10572}
>
> TBR=sprang@webrtc.org,stefan@webrtc.org,philipel@google.com,asapersson@webrtc.org,mflodman@webrtc.org,philipel@webrtc.org
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:4914
>
> Committed: https://crrev.com/0be8f1d347bdb171462df89c2a4c69b3f3eb7519
> Cr-Commit-Position: refs/heads/master@{#10578}
TBR=sprang@webrtc.org,stefan@webrtc.org,philipel@google.com,asapersson@webrtc.org,mflodman@webrtc.org,terelius@webrtc.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:4914
Review URL: https://codereview.webrtc.org/1431283002
Cr-Commit-Position: refs/heads/master@{#10581}
This is a re-land of https://codereview.webrtc.org/1353263005/
which was reverted because of perf-regressions. Changes since that CL:
* Change LayerFilteringTransport to send a padding packet instead of
dropping it for data that should be filtered out. This prevents
confusion due to changed sequence numbers.
* Changed timing of stats poller thread in VideoAnalyzer. Startup was
racy wrt initializion of send_stream_.
* Minor formatting issues.
PERF NOTE: This change will affect some performance numbers slightly.
In particular, {encode_frame_rate, encode_time_ms,
encode_usage_percent, media_bitrate_bps} will change due to timing
of the measurements.
BUG=
R=pbos@webrtc.orgTBR=mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1412233003
Cr-Commit-Position: refs/heads/master@{#10483}
Reason for revert:
Temporarily reverting as this causes some issues with perf tests. Especially tests with packet loss no longer works.
Original issue's description:
> Adding support for simulcast and spatial layers into VideoQualityTest
>
> The CL includes several changes:
> - Adding flags describing the streams and spatial layers.
> - Reorganizing the order of the flags, to make them easier to maintain.
> - Adding a member .params_ to VideoQualityAnalyzer.
> (instead of passing it to every member function manually)
> - Updating VideoAnalyzer to support simulcast.
> (select appropriate ssrc and fix timestamps which are sometimes increased by 1)
> - VP9EncoderImpl already had code for automatic calculation of bitrate for each layer.
> Changing to first read bitrates and resolution ratios from the flags, if specified.
> If not specified, reverting to the old code are setting the values automatically.
> - Changing the parameters in LayerFilteringTransport, replacing
> xx_discard_thresholds with selected_xx, to make it easier to use for the end user.
>
> Committed: https://crrev.com/87f83a9a27d657731ccb54025bc04ccad0da136e
> Cr-Commit-Position: refs/heads/master@{#10215}
TBR=pbos@webrtc.org,mflodman@webrtc.org,ivica@webrtc.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.webrtc.org/1397363002
Cr-Commit-Position: refs/heads/master@{#10252}
The CL includes several changes:
- Adding flags describing the streams and spatial layers.
- Reorganizing the order of the flags, to make them easier to maintain.
- Adding a member .params_ to VideoQualityAnalyzer.
(instead of passing it to every member function manually)
- Updating VideoAnalyzer to support simulcast.
(select appropriate ssrc and fix timestamps which are sometimes increased by 1)
- VP9EncoderImpl already had code for automatic calculation of bitrate for each layer.
Changing to first read bitrates and resolution ratios from the flags, if specified.
If not specified, reverting to the old code are setting the values automatically.
- Changing the parameters in LayerFilteringTransport, replacing
xx_discard_thresholds with selected_xx, to make it easier to use for the end user.
Review URL: https://codereview.webrtc.org/1353263005
Cr-Commit-Position: refs/heads/master@{#10215}
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
