GCM cipher suites are optional (disabled by default) and can be enabled
through "PeerConnectionFactoryInterface::Options".
If compiled with Chromium (i.e. "ENABLE_EXTERNAL_AUTH" is defined), no
GCM ciphers can be used yet (see https://crbug.com/628400).
BUG=webrtc:5222, 628400
Review-Url: https://codereview.webrtc.org/1528843005
Cr-Commit-Position: refs/heads/master@{#13635}
This test verifies that SRTP errors are only signaled if a specific
amount of time has passed, and was using ProcessMessages(time) to
wait for an amount of time. But ProcessMessages may sometimes wait
for longer than the requested time (especially on TSAN bot, etc.).
BUG=webrtc:4690
R=tommi@webrtc.org
Review URL: https://codereview.webrtc.org/2184083004 .
Cr-Commit-Position: refs/heads/master@{#13597}
The "should I simulate EWOULDBLOCK?" determination now happens
solely in P2PTransportChannel. This also fixes a bug where the
"last packet id" was set even if no packet was sent.
R=honghaiz@webrtc.org, pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/2099783002 .
Cr-Commit-Position: refs/heads/master@{#13307}
Reason for revert:
It turns out this revert was not necessary because the connection-state mapping for turn-turn connections was not done in connection.
Original issue's description:
> Revert of Revert "Revert of Update the BWE when the network route changes. (patchset #5 id:180001 of https://… (patchset #5 id:120001 of https://codereview.webrtc.org/2041593002/ )
>
> Reason for revert:
> ReadyToSendMedia did not consider the new presumed_writable state.
>
> Original issue's description:
> > Revert "Revert of Update the BWE when the network route changes. (patchset #5 id:180001 of https://codereview.webrtc.org/2000063003/ )"
> >
> > This reverts commit 72d41aa6da94dacb8a8464d1abd4ca7d1afffc65.
> >
> > New change made:
> > Do not reset the BWE when the new network route is not ready to send media.
> >
> > BUG=
> > R=pthatcher@webrtc.org, stefan@webrtc.org
> >
TBR=pthatcher@webrtc.org,stefan@webrtc.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review-Url: https://codereview.webrtc.org/2094863003
Cr-Commit-Position: refs/heads/master@{#13282}
Reason for revert:
ReadyToSendMedia did not consider the new presumed_writable state.
Original issue's description:
> Revert "Revert of Update the BWE when the network route changes. (patchset #5 id:180001 of https://codereview.webrtc.org/2000063003/ )"
>
> This reverts commit 72d41aa6da94dacb8a8464d1abd4ca7d1afffc65.
>
> New change made:
> Do not reset the BWE when the new network route is not ready to send media.
>
> BUG=
> R=pthatcher@webrtc.org, stefan@webrtc.org
>
> Committed: https://crrev.com/5b5d2cdad7018993272525a723ef34f7da5c45f2
> Cr-Commit-Position: refs/heads/master@{#13280}
TBR=pthatcher@webrtc.org,stefan@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review-Url: https://codereview.webrtc.org/2098703004
Cr-Commit-Position: refs/heads/master@{#13281}
Every message will now be traced with the location from which it was
posted, including function name, file and line number.
This CL also writes a normal LOG message when the dispatch took more
than a certain amount of time (currently 50ms).
This logging should help us identify messages that are taking
longer than expected to be dispatched.
R=pthatcher@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/2019423006 .
Cr-Commit-Position: refs/heads/master@{#13104}
This means there's only one thread hop to the worker thread.
At the video engine level, SetOptions and SetSource
are combined into one method (all within the same critical section)
which ensures that no frame will be encoded while SetVideoSend
is only partially finished.
BUG=webrtc:5691
Review-Url: https://codereview.webrtc.org/1838413002
Cr-Commit-Position: refs/heads/master@{#13022}
With this change, when max-bundle and rtcp-mux are both enabled, we no
longer create and destroy a temporary transport channel when a media
channel gets added. Instead, the media channel uses the correct bundled
transport channel from the start.
This fixes a bug where adding a media type would cause the ICE state to
briefly become Disconnected and then immediately recover. The temporary
channel was created in a non-writable state, which caused the
TransportController to declare the ICE state to be Disconnected (as not
all transport channels were writable). Right after creation, the
temporary channel was then destroyed and the ICE state went back to the
correct one.
BUG=webrtc:5856
Review-Url: https://codereview.webrtc.org/1972493002
Cr-Commit-Position: refs/heads/master@{#12781}
This is similar to how a "receive" method is used to apply
RtpParameters to an RtpReceiver in ORTC. Currently, SetParameters
doesn't allow changing the parameters, so the main use of the API is
to retrieve the set of configured codecs. But other uses will likely
be made possible in the future.
R=glaznev@webrtc.org, pthatcher@webrtc.org, tkchin@webrtc.org
Review URL: https://codereview.webrtc.org/1917193008 .
Cr-Commit-Position: refs/heads/master@{#12761}
BaseChannel do calls to transport_channel on network_thread,
while keep calls to media_engine on worker_thread.
It still works when network_thread == worker_thread.
BUG=webrtc:5645
R=pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/1903393004 .
Cr-Commit-Position: refs/heads/master@{#12690}
This propagated into various other places. Also had to #include headers that
were implicitly pulled by "scoped_ptr.h".
BUG=webrtc:5520
Review URL: https://codereview.webrtc.org/1920043002
Cr-Commit-Position: refs/heads/master@{#12501}
This field only existed as an implementation detail for getting the
codecs sorted, so it doesn't need to be in the public interface.
It cluttered the code and undesirably affected codec comparisons,
causing the video encoder to be reconfigured if a codec's preference
changed but nothing else did.
BUG=webrtc:5690
Review URL: https://codereview.webrtc.org/1845673002
Cr-Commit-Position: refs/heads/master@{#12349}
This change builds on top of the refactoring in https://codereview.webrtc.org/1841083008/, and enables WebRTC client applications to control the max send bitrate for every audio stream through RtpParameters.
The AudioSendStream now stores the last codec spec, and whenever a global or per-stream bitrate limit changes, the effective limit (smaller of the two) is recomputed and the codec is reconfigured with that bitrate.
TBR=pthatcher
BUG=
Review URL: https://codereview.webrtc.org/1847353004
Cr-Commit-Position: refs/heads/master@{#12290}
so that the call knows which packet ids were sent on the previous candidate pair.
Note that packet_id is actually 16bits, so we can use -1 for values that are not set.
Also moved the tests for candidate pair changes to TestSelectConnectionBeforeNomination.
BUG=
R=deadbeef@webrtc.org, pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/1842093002 .
Cr-Commit-Position: refs/heads/master@{#12184}
This CL removes copy and assign support from Buffer and changes various
parameters from Buffer to CopyOnWriteBuffer so they can be passed along
and copied without actually copying the underlying data.
With this changed some parameters to be "const" and fixed an issue when
creating a CopyOnWriteBuffer with empty data.
BUG=webrtc:5155
Review URL: https://codereview.webrtc.org/1823503002
Cr-Commit-Position: refs/heads/master@{#12062}
Reason for revert:
I'm really sorry for having to revert this but it seems this hit an unexpected compile error downstream:
webrtc/media/sctp/sctpdataengine.cc: In function 'void cricket::VerboseLogPacket(const void*, size_t, int)':
webrtc/media/sctp/sctpdataengine.cc:172:37: error: invalid conversion from 'const void*' to 'void*' [-fpermissive]
data, length, direction)) != NULL) {
^
In file included from webrtc/media/sctp/sctpdataengine.cc:20:0:
third_party/usrsctp/usrsctplib/usrsctp.h:964:1: error: initializing argument 1 of 'char* usrsctp_dumppacket(void*, size_t, int)' [-fpermissive]
usrsctp_dumppacket(void *, size_t, int);
^
I'm sure you can fix this easily and just re-land this CL, while I'm going to look into how to add this warning at the public bots (on Monday).
Original issue's description:
> Use CopyOnWriteBuffer instead of Buffer to avoid unnecessary copies.
>
> This CL removes copy and assign support from Buffer and changes various
> parameters from Buffer to CopyOnWriteBuffer so they can be passed along
> and copied without actually copying the underlying data.
>
> With this changed some parameters to be "const" and fixed an issue when
> creating a CopyOnWriteBuffer with empty data.
>
> BUG=webrtc:5155
>
> Committed: https://crrev.com/944c39006f1c52aee20919676002dac7a42b1c05
> Cr-Commit-Position: refs/heads/master@{#12058}
TBR=kwiberg@webrtc.org,tkchin@webrtc.org,tommi@webrtc.org,pthatcher@webrtc.org,jbauch@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5155
Review URL: https://codereview.webrtc.org/1817753003
Cr-Commit-Position: refs/heads/master@{#12060}
This CL removes copy and assign support from Buffer and changes various
parameters from Buffer to CopyOnWriteBuffer so they can be passed along
and copied without actually copying the underlying data.
With this changed some parameters to be "const" and fixed an issue when
creating a CopyOnWriteBuffer with empty data.
BUG=webrtc:5155
Review URL: https://codereview.webrtc.org/1785713005
Cr-Commit-Position: refs/heads/master@{#12058}
Changed the channel unittest to use locking when reading/writing the
result variable. To do this, I had to move the result into the thread
object, which in turn required me to properly handle the lifetime of the
thread object, since it cannot disappear while we want to read the
result.
It is still possible to have the result being written to a local
variable, but it will only be updated as the thread object is
destroyed. It is used to for the implementation of
CallOnThreadAndWaitForDone. The old CallOnThread is gone and replaced by
ScopedCallThread instead.
BUG=webrtc:5524
Review URL: https://codereview.webrtc.org/1736763006
Cr-Commit-Position: refs/heads/master@{#12027}
This change allows the application to limit the bitrate of the outgoing
audio and video streams at runtime. The API roughly follows the WebRTC
API draft, defining the RTCRtpParameters structure witn exactly one
encoding (simulcast streams are not exposed in the API for now).
(https://www.w3.org/TR/webrtc/#idl-def-RTCRtpParameters)
BUG=
Review URL: https://codereview.webrtc.org/1788583004
Cr-Commit-Position: refs/heads/master@{#12025}
