Per comments from HL/kwiberg on https://webrtc-codereview.appspot.com/42569004 , when there is existing usage of mixed types (int16_t, int, etc.), we'd prefer to standardize on larger types like int and phase out use of int16_t.
Specifically, "Using int16 just because we're sure all reasonable values will fit in 16 bits isn't usually meaningful in C."
This converts some existing uses of int16_t (and, in a few cases, other types such as uint16_t) to int (or, in a few places, int32_t). Other locations will be converted to size_t in a separate change.
BUG=none
R=andrew@webrtc.org, kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/54629004
Cr-Commit-Position: refs/heads/master@{#9405}
The existing style in these files is pretty inconsistent and wildly divergent
from most of WebRTC/Chromium; clang-formatting them not only makes them easier
to read, it makes me see fewer presubmit errors when I try to touch the files to
make other changes.
BUG=none
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/52019004
Cr-Commit-Position: refs/heads/master@{#9364}
This reverts commit d8a03facf6986a011c8f889c63d87f9216a1e912, since it
broke the Chrome build. Will have to swap to using base/logging.h in
neteq_impl.cc before re-landing this change.
TBR=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/50219004
Cr-Commit-Position: refs/heads/master@{#9360}
This was not implemented before. It returns the current total delay (packet buffer and sync buffer) of NetEq. This is the same information that was already available in NetEqNetworkStatistics::current_buffer_size_ms, that can be obtained through NetEq::NetworkStatistics(). But, since the current delay is a key metric of NetEq, it is convenient to have it available in a simpler way.
R=kwiberg@webrtc.org, minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/51149004
Cr-Commit-Position: refs/heads/master@{#9359}
A modified operation mode was added, holding:
--- Stricter conditions for AcceleratedRampUp.
--- Smoother GradualRateUpdate adjustments.
--- New AcceleratedRampDown update mode.
This mode reduces significantly the delay for bitrates around its minimum bound.
Several NADA unittests and a few simulations were added.
Fixed LinkedSet bug.
Fixed IsNewerSequenceNumber/IsNewerTimestamp bug.
BUG=4550
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/54399004
Cr-Commit-Position: refs/heads/master@{#9340}
This change instroduces a mode where the Accelerate operation will be
more aggressive. When enabled, it will allow acceleration at lower
correlation levels, and possibly remove multiple pitch periods at
once.
The feature is enabled through NetEq::Config, and is off by
default. This means that bit-exactness tests are currently not
affected.
A unit test was added for the Accelerate class, with and without fast
mode enabled.
BUG=4691
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/50039004
Cr-Commit-Position: refs/heads/master@{#9295}
Changed the WebRtcVad_Create() function to the more conventional format of returning the handle directly instead of an error code to take care of.
In addition NULL was changed to nullptr in the files where it applied.
Affected components:
* AGC
* VAD
* NetEQ
BUG=441, 3347
TESTED=locally on Linux and trybots
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/51919004
Cr-Commit-Position: refs/heads/master@{#9291}
1. move channel number of input file to the base class
2. limit channel number to be 1, since the resampler support only mono at the moment
3. adding a logging function
4. adding more switch to neteq_opus_quality_test
BUG=2692
R=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47239004
Cr-Commit-Position: refs/heads/master@{#9260}
Merge WEBRTC_ARCH_ARM64_NEON and WEBRTC_ARCH_ARM_NEON into one
WEBRTC_HAS_NEON.
Replace WEBRTC_DETECT_ARM_NEON by WEBRTC_DETECT_NEON.
Replace WEBRTC_ARCH_ARM by WEBRTC_ARCH_ARM64 for arm64 cpu.
BUG=4002
R=andrew@webrtc.org, jridges@masque.com, kjellander@webrtc.org
Change-Id: I870a4d0682b80633b671c9aab733153f6d95a980
Review URL: https://webrtc-codereview.appspot.com/49309004
Cr-Commit-Position: refs/heads/master@{#9228}
Also change to use virtual_packet_length_bytes in order to print the
actual packet size of the complete packet even when the RTP file only
contains RTP headers.
BUG=2692
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/51559004
Cr-Commit-Position: refs/heads/master@{#9025}
A codec's packet-loss concealer is called once from NetEq before
decoding the first packet after a packet loss. The purpose is not to
use the PLC output, but to prepare the state of the decoder such that
it may recover faster after the loss. However, this effect is not
achieved by calling iSAC's PLC. Also, there are some problems with the
fixed-point implementation of the PLC (see the associated bug).
BUG=4423
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42849004
Cr-Commit-Position: refs/heads/master@{#8827}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8827 4adac7df-926f-26a2-2b94-8c16560cd09d
NetEQ can crash when decoder gives too many output samples than it can handle. A practical case this happens is when multiple opus packets are combined.
The best solution is to pass the max size to the ACM decode function and let it return a failure if the max size if too small.
BUG=4361
R=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/45619004
Cr-Commit-Position: refs/heads/master@{#8730}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8730 4adac7df-926f-26a2-2b94-8c16560cd09d
The macro is defined as
#define WEBRTC_SPL_MUL_16_16_RSFT(a, b, c) \
(WEBRTC_SPL_MUL_16_16(a, b) >> (c))
where the latter macro is in C defined as
#define WEBRTC_SPL_MUL_16_16(a, b) \
((int32_t) (((int16_t)(a)) * ((int16_t)(b))))
(For definitions on ARMv7 and MIPS, see common_audio/signal_processing/include/spl_inl_{armv7,mips}.h)
The replacement consists of
- avoiding casts to int16_t if inputs already are int16_t
- adding explicit cast to <type> if result is assigned to <type> (other than int or int32_t)
- minor cleanups like remove of unnecessary parentheses and style changes
In addition an implicit cast from int32_t to int16_t was removed, which was a bug.
BUG=3348, 3353
TESTED=Locally on Mac and trybots
R=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41179004
Cr-Commit-Position: refs/heads/master@{#8653}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8653 4adac7df-926f-26a2-2b94-8c16560cd09d
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
Mostly, it's about moving constructors and descructors to the .cc
files, so that they won't be inlined everywhere.
The reason this CL is so big is that a lot of code was using
common_types.h without declaring a dependency on webrtc_common, which
broke the build once common_types.h started to depend on
common_types.cc.
BUG=163
R=kjellander@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/26089004
Cr-Commit-Position: refs/heads/master@{#8516}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8516 4adac7df-926f-26a2-2b94-8c16560cd09d
This should be safe to land now that issue 4143 was resolved (in r8492).
This change effectively reverts 8488.
TBR=kwiberg@webrtc.org
Original commit message:
This CL changes the way the decoder sample rate is set and updated. In
practice, it only concerns the iSAC (float) codec.
One single iSAC decoder instance is used for both wideband and
super-wideband decoding, and the instance must be told to switch
output frequency if the payload type changes. This used to be done
through a call to UpdateDecoderSampleRate, but is now instead done in
the Decode call as an extra parameter.
Review URL: https://webrtc-codereview.appspot.com/39289004
Cr-Commit-Position: refs/heads/master@{#8496}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8496 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL changes the way the decoder sample rate is set and updated. In
practice, it only concerns the iSAC (float) codec.
One single iSAC decoder instance is used for both wideband and
super-wideband decoding, and the instance must be told to switch
output frequency if the payload type changes. This used to be done
through a call to UpdateDecoderSampleRate, but is now instead done in
the Decode call as an extra parameter.
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/34349004
Cr-Commit-Position: refs/heads/master@{#8476}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8476 4adac7df-926f-26a2-2b94-8c16560cd09d
* Move constants into the files/functions that use them
* Declare variables in the narrowest scope possible
* Use correct (expected, actual) order for gtest macros
* Remove unused functions
* Untabify
* 80-column limit
* Avoid C-style casts
* Prefer true typed constants to "enum hack" constants
* Print size_t using the right format macro
* Shorten and simplify code
* Other random cleanup bits and style fixes
BUG=none
TEST=none
R=henrik.lundin@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/36179004
Cr-Commit-Position: refs/heads/master@{#8467}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8467 4adac7df-926f-26a2-2b94-8c16560cd09d
Although sample_rate_hz(), num_channels(), and rtp_timestamp_rate_hz()
are simple accessors for almost all implementations of AudioEncoder,
they are virtual and not guaranteed to be just simple accessors. Thus,
it makes more sense to use the normal CamelCase naming scheme.
BUG=4235
R=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/34239004
Cr-Commit-Position: refs/heads/master@{#8407}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8407 4adac7df-926f-26a2-2b94-8c16560cd09d
