In short, the caller places a x-opaque line in SDP for each m= section that
uses datagram transport. If the answerer supports datagram transport, it will
parse this line and create a datagram transport. It will then echo the x-opaque
line into the answer (to indicate that it accepted use of datagram transport).
If the offer and answer contain exactly the same x-opaque line, both peers will
use datagram transport. If the x-opaque line is omitted from the answer (or is
different in the answer) they will fall back to RTP.
Note that a different x-opaque line in the answer means the answerer did not
understand something in the negotiation proto. Since WebRTC cannot know what
was misunderstood, or whether it's still possible to use the datagram transport,
it must fall back to RTP. This may change in the future, possibly by passing
the answer to the datagram transport, but it's good enough for now.
Negotiation consists of four parts:
1. DatagramTransport exposes transport parameters for both client and server
perspectives. The client just echoes what it received from the server (modulo
any fields it might not have understood).
2. SDP adds a x-opaque line for opaque transport parameters. Identical to
x-mt, but this is specific to datagram transport and goes in each m= section,
and appears in the answer as well as the offer.
- This is propagated to Jsep as part of the TransportDescription.
- SDP files: transport_description.h,cc, transport_description_factory.h,cc,
media_session.cc, webrtc_sdp.cc
3. JsepTransport/Controller:
- Exposes opaque parameters for each mid (m= section). On offerer, this means
pre-allocating a datagram transport and getting its parameters. On the
answerer, this means echoing the offerer's parameters.
- Uses a composite RTP transport to receive from either default RTP or
datagram transport until both offer and answer arrive.
- If a provisional answer arrives, sets the composite to send on the
provisionally selected transport.
- Once both offer and answer are set, deletes the unneeded transports and
keeps whichever transport is selected.
4. PeerConnection pulls transport parameters out of Jsep and adds them to SDP.
Bug: webrtc:9719
Change-Id: Ifcc428c8d76fb77dcc8abaa79507c620bcfb31b9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140920
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Commit-Queue: Bjorn Mellem <mellem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28198}
This reverts commit 71c6482baf0ff17141c635e6a7639493db68a65c.
Reason for revert: Lands too much at once and breaks downstream tests that need to implement new interfaces first.
Original change's description:
> Implement true negotiation for DatagramTransport with fallback to RTP.
>
> In short, the caller places a x-opaque line in SDP for each m= section that
> uses datagram transport. If the answerer supports datagram transport, it will
> parse this line and create a datagram transport. It will then echo the x-opaque
> line into the answer (to indicate that it accepted use of datagram transport).
>
> If the offer and answer contain exactly the same x-opaque line, both peers will
> use datagram transport. If the x-opaque line is omitted from the answer (or is
> different in the answer) they will fall back to RTP.
>
> Note that a different x-opaque line in the answer means the answerer did not
> understand something in the negotiation proto. Since WebRTC cannot know what
> was misunderstood, or whether it's still possible to use the datagram transport,
> it must fall back to RTP. This may change in the future, possibly by passing
> the answer to the datagram transport, but it's good enough for now.
>
> Negotiation consists of four parts:
> 1. DatagramTransport exposes transport parameters for both client and server
> perspectives. The client just echoes what it received from the server (modulo
> any fields it might not have understood).
>
> 2. SDP adds a x-opaque line for opaque transport parameters. Identical to
> x-mt, but this is specific to datagram transport and goes in each m= section,
> and appears in the answer as well as the offer.
> - This is propagated to Jsep as part of the TransportDescription.
> - SDP files: transport_description.h,cc, transport_description_factory.h,cc,
> media_session.cc, webrtc_sdp.cc
>
> 3. JsepTransport/Controller:
> - Exposes opaque parameters for each mid (m= section). On offerer, this means
> pre-allocating a datagram transport and getting its parameters. On the
> answerer, this means echoing the offerer's parameters.
> - Uses a composite RTP transport to receive from either default RTP or
> datagram transport until both offer and answer arrive.
> - If a provisional answer arrives, sets the composite to send on the
> provisionally selected transport.
> - Once both offer and answer are set, deletes the unneeded transports and
> keeps whichever transport is selected.
>
> 4. PeerConnection pulls transport parameters out of Jsep and adds them to SDP.
>
> Bug: webrtc:9719
> Change-Id: Id8996eb1871e79d93b7923a5d7eb3431548c798d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140700
> Commit-Queue: Bjorn Mellem <mellem@webrtc.org>
> Reviewed-by: Steve Anton <steveanton@webrtc.org>
> Reviewed-by: Anton Sukhanov <sukhanov@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28182}
TBR=steveanton@webrtc.org,mellem@webrtc.org,sukhanov@webrtc.org
Change-Id: I0d502c4a6d27516c35ed85154f3fa5869f88b3b7
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9719
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140822
Commit-Queue: Bjorn Mellem <mellem@webrtc.org>
Reviewed-by: Bjorn Mellem <mellem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28188}
In short, the caller places a x-opaque line in SDP for each m= section that
uses datagram transport. If the answerer supports datagram transport, it will
parse this line and create a datagram transport. It will then echo the x-opaque
line into the answer (to indicate that it accepted use of datagram transport).
If the offer and answer contain exactly the same x-opaque line, both peers will
use datagram transport. If the x-opaque line is omitted from the answer (or is
different in the answer) they will fall back to RTP.
Note that a different x-opaque line in the answer means the answerer did not
understand something in the negotiation proto. Since WebRTC cannot know what
was misunderstood, or whether it's still possible to use the datagram transport,
it must fall back to RTP. This may change in the future, possibly by passing
the answer to the datagram transport, but it's good enough for now.
Negotiation consists of four parts:
1. DatagramTransport exposes transport parameters for both client and server
perspectives. The client just echoes what it received from the server (modulo
any fields it might not have understood).
2. SDP adds a x-opaque line for opaque transport parameters. Identical to
x-mt, but this is specific to datagram transport and goes in each m= section,
and appears in the answer as well as the offer.
- This is propagated to Jsep as part of the TransportDescription.
- SDP files: transport_description.h,cc, transport_description_factory.h,cc,
media_session.cc, webrtc_sdp.cc
3. JsepTransport/Controller:
- Exposes opaque parameters for each mid (m= section). On offerer, this means
pre-allocating a datagram transport and getting its parameters. On the
answerer, this means echoing the offerer's parameters.
- Uses a composite RTP transport to receive from either default RTP or
datagram transport until both offer and answer arrive.
- If a provisional answer arrives, sets the composite to send on the
provisionally selected transport.
- Once both offer and answer are set, deletes the unneeded transports and
keeps whichever transport is selected.
4. PeerConnection pulls transport parameters out of Jsep and adds them to SDP.
Bug: webrtc:9719
Change-Id: Id8996eb1871e79d93b7923a5d7eb3431548c798d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140700
Commit-Queue: Bjorn Mellem <mellem@webrtc.org>
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Reviewed-by: Anton Sukhanov <sukhanov@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28182}
Semi-automatically created with:
git grep -l " testing::" | xargs sed -i "s/ testing::/ ::testing::/g"
git grep -l "(testing::" | xargs sed -i "s/(testing::/(::testing::/g"
git cl format
After this, two .cc files failed to compile and I have fixed them
manually.
Bug: webrtc:10523
Change-Id: I4741d3bcedc831b6c5fdc04485678617eb4ce031
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132018
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27526}
