The decode time per frame and codec profile histograms were added
temporarily to make it possible to get an overview of the decode
time distributions. This fine grained information is not needed
longer and the histograms can be deleted.
Bug: chromium:1007526
Change-Id: Ie59627a88813e0710700cf0e13eedd6627010266
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/266496
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37316}
This was capped to the max wait for a frame, but if the stream was
timing out in a set period of time, it would do this before the frame
was decoded. Instead, this should be done the stream timeout is
triggered.
Bug: webrtc:14168
Change-Id: Iecde082bd223c469f735afeb77a00c0387e47b3b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/266369
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37310}
increasing precision since summing up rounded values leads to
a rounding error, in particular for small frames which take very
little time to decode.
BUG=webrtc:12526,webrtc:13756
Change-Id: I647c702808856a002c746ed9f115aa9bcaddc1f3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/262810
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Philipp Hancke <philipp.hancke@googlemail.com>
Cr-Commit-Position: refs/heads/main@{#37249}
Last attempt resulted in some regressions in low-bw scenarios. These
should have been fixed with bugs.webrtc.org/14168.
Bug: webrtc:14003
Change-Id: Iaab954b7f9a390fbfc96a9cf0dacb3a950157c49
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/265865
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37240}
This CL accomplishes three things:
1) It enables feeding frame drop indications into the
AdaptedVideoTrackSource for the benefit of downstream projects.
2) Under zero hertz source delivery, a discarded frame ending a
sequence of frames which happened to contain important information
can be seen as a capture freeze. Avoid this by starting requesting
refresh frames after a grace period.
3) It changes the duration until first refresh frame requests on new
streams to three frame periods.
Bug: chromium:1324120, chromium:1336952
Change-Id: I0214852f1a26540588f6c193dd88a65c34ec0d99
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/265871
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Markus Handell <handellm@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37238}
This will later be used when merging FrameBuffer3Proxy into
VideoReceiveStream2.
Bug: webrtc:14003
Change-Id: Ieb97767c40f494510873abe775fc339125036dc0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/265923
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37237}
This is the first CL out of three to make the low-latency stream signaling
explicit. At the moment this is done by setting the render time to 0.
There's a dependency between Chromium and WebRTC which is why this is
split into three CLs to not break any existing functionality.
Bug: chromium:1327251
Change-Id: Ie6b268746d587a99334485db77181fb2c6e9b567
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/264502
Reviewed-by: Evan Shrubsole <eshr@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37225}
This is cleaner than checking the size before and after, as is currently
done in FrameBufferProxy
Bug: webrtc:14168
Change-Id: Iac896ddf7b1b0b8513159451de7cd8a10668a49a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/265663
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37222}
In FrameBuffer3Proxy, if the stream became undecodable for a long
period of time and during this period the FPS changed,
the render times and decode delays would stray and cause
video pauses. This was because FrameBuffer3Proxy only updated the rtp
timestamp extrapolator on each new decodable temporal unit, rather than
each new frame.
Bug: webrtc:14168
Change-Id: I67a2c9ea392d24f84e82aa04f8c3076de11732af
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/265388
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37201}
When a large queue of frames builds up due to a lost frame, the decode
delay can sometimes become quite large. In this case the stream may
signal as timed out when in fact it is not. Instead, the delay should
be capped at the timeout limit.
Bug: webrtc:14168
Change-Id: I5b4e8851b2c6d7d27a698627dc1633931d7fc00e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/265404
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37199}
This cl/ adds a way of setting an EncoderSelector on a specific
RtpSenderInterface. This makes it possible to easily use different
EncoderSelector on different streams within the same or different PeerConnections.
The cl/ is almost identical to the impl. of RtpSenderInterface::SetFrameEncryptor.
Iff a EncoderSelector is set on the RtpSender, it will take precedence
over the VideoEncoderFactory::GetEncoderSelector.
Bug: webrtc:14122
Change-Id: Ief4f7c06df7f1ef4ce3245de304a48e9de0ad587
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/264542
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Jonas Oreland <jonaso@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37150}
FrameBuffer3Proxy and sync decoding has been shown to work. First step of cleaning up is to remove the FrameBuffer2Proxy.
Change-Id: Ic96303c2d4f9111cfeed9927e8826ea7ffe7ee17
Bug: webrtc:14003
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/264126
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37086}
Code that is probably bogus and causes frequent down-adaptation on
dual core systems was identified. We wish to remove this code in a
safe way. This CL achieves this under kill switch
WebRTC-MacSpecialOveruseRulesRemovalKillSwitch.
Fixed: webrtc:14138
Change-Id: Idf53348c8e1dc032d8eea58f626f91456d72ecb4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/264423
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Evan Shrubsole <eshr@webrtc.org>
Commit-Queue: Markus Handell <handellm@webrtc.org>
Auto-Submit: Markus Handell <handellm@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37043}
Setting the transport cc flag was only possible post creation for
audio receive streams, while video receive streams need to be recreated.
This CL moves the setter for transport_cc() to where the getter is and
adds boiler plate implementations for the video streams. For audio
streams this splits "SetUseTransportCcAndNackHistory" into two methods,
SetTransportCc and SetNackHistory.
Bug: none
Change-Id: Idbec8217aef10ee77907cebaecdc27b4b0fb18e4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/264443
Commit-Queue: Tomas Gunnarsson <tommi@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37038}
When MediaStreamVideoSource::RequestRefreshFrame is called, the
capturer most often emits a refresh frame. Due to various
conditions such as for example timing of prior delivery,
these frames can be dropped at various places in the input
pipeline into WebRTC.
This change ensures the frame cadence adapter repeatedly
requests refresh frames at max fps frequency until one is
received, in which case the requests cease.
Fixed: chromium:1324120
Change-Id: I90f85d31b132b6c441aa1c28c5eff85e3dc365ad
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/263520
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Markus Handell <handellm@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#36998}
There are two cases that can be confusing for applications developers
which may result in the playout delay not being set as intended.
First, it is not well defined which min playout delay should be used
when multiple are set. This changes adds a warning to alert application
developers that they are setting multiple playout delays.
Second, if the playout delay header extension is used, developers must
be careful that the max playout delay is always larger than the min
playout delay, otherwise the behaviour is undefined. This change logs an
error when this case is detected.
Bug: None
Change-Id: I8477d48ef64636da080792362fa898e42f038bef
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/263202
Reviewed-by: Tomas Gunnarsson <tommi@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#36977}
Putting these classes in a sub folder increases
structure and clarifies that they are used as
helper classes. Affected classes in this change:
* CodecTimer
* InterFrameDelay
* RttFilter
VCMTiming will be moved in a separate CL.
Additional changes:
* Remove VCM prefix from class names.
* Introduce granular BUILD.gn targets.
* Update some includes.
Bug: webrtc:14111
Change-Id: Ia75128aa955a819033b97d4784cb61904de7230b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/262960
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Tomas Gunnarsson <tommi@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#36975}
This helper class currently lives in `modules/video_coding`,
but it's only users are in `video/`. Thus, it makes sense to
move the class to `video/`.
Bug: webrtc:14116
Change-Id: I0d3f8961bc8f5fe80f3100dbbd309b206020e6d5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/262963
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#36973}
In case the encoder TQ has been stopped and doesn't accept more tasks,
we could end up in a hung state during Stop(). This is a hypothetical
situation, but can be simulated in a test and avoided.
Bug: webrtc:14063
Change-Id: I20f48b11b6266f6875ed5e69de3529212505e439
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/258125
Reviewed-by: Evan Shrubsole <eshr@webrtc.org>
Commit-Queue: Tomas Gunnarsson <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#36964}
Step one in making it a separate type, that will be done as a
followup, after downstream code is updated to use the new name.
Bug: webrtc:11607
Change-Id: I6fa664a0729b1cfd71b7f02b6441880beee0e741
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/262806
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#36946}
