Assuming 15Mbps video bitrate at 30fps, a single frame is 62500 bytes.
Add to that some fluctuations in encoder output rate and capture fps,
and frames can easily become larger than 64kb.
Given enough bandwidth and the bursty pacer, it will not be uncommon to
send the entire frame in one batch - and if the send buffer is at 64kb
then you will likely get packetloss already in the IPC packet socket,
even before the packet has reached the network card!
It's not entirely clear what the optimal size is, but given that the
receive buffer size was increased from 64kb to 256kb for high bandwidth
receive scenarios and had negligible negative effects I think it's
pretty safe to bump the send buffer to match.
There is a field trial available that can be used as circuit breaker
in case things turn south: WebRTC-SendBufferSizeBytes
Bug: webrtc:14780
Change-Id: I6c786d993181a882e6dce832ff56dc92d2a8a341
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/290985
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39942}
This avoid overflow when handling large input sizes, e.g.2016x1512, or 2592x1944.
Bug: webrtc:15030
Change-Id: I97d5fa163ce0fac4c47f21826656819e652efafe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/300240
Commit-Queue: Ying Wang <yinwa@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39774}
which describe the existing behavior that necessitated the revert
b396e2b159b060791954495d68278a55e8f72092
Also change the fake media engine audio clockrate to 8000 instead
of 0 and the fake media engine video payload type to something but
0 as this value seems to be treated specially by the video engine
and is a payload type reserved for PCMU.
BUG=chromium:1051821
Change-Id: Ib0a345d59baba50a565f01685d240e41584367e6
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/299000
Commit-Queue: Philipp Hancke <phancke@microsoft.com>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39699}
This avoids a couple of layers of error code conversion, reduces
dependency on cricket error types and allows us to preserve error
information from dcsctp. Along the way remove SendDataResult.
Bug: none
Change-Id: I1ad18a8f0b2fb181745b19c49f36f270708720c0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/298305
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Tomas Gunnarsson <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39619}
This struct only contains two member variables now and there isn't
much value added by having it.
Low-Coverage-Reason: No change in coverage, CL modifies uncovered RTC_LOG lines.
Bug: none
Change-Id: I924d450f4c8f8e49b1cfeabaebee9fd5235a90cc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/297360
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Tomas Gunnarsson <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39563}
This reverts commit 18c869bc36b342cd4a79947067e52a93a04a7808.
Reason for revert: Added a field trial that allows landing the code without affecting performance in prod.
This CL also incorporates subsequent CLs that also had to be reverted.
Original change's description:
> Revert "Use two MediaChannels for 2 directions."
>
> This reverts commit 8981a6fac3d665beac4a58b9453e6c39988a024f.
>
> Reason for revert: Quality regression detected.
>
> Original change's description:
> > Use two MediaChannels for 2 directions.
> >
> > This CL separates the two directions of MediaChannel into two separate objects that do not couple with each other.
> >
> > The notable API change is that receiver local SSRC now has to be set explicitly - before, it was done implicitly when the send-side MediaChannel had a stream added to it.
> >
> > Bug: webrtc:13931
> > Change-Id: I83c2e3c8e79f89872d5adda1bc2899f7049748b3
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288400
> > Commit-Queue: Harald Alvestrand <hta@webrtc.org>
> > Reviewed-by: Henrik Boström <hbos@webrtc.org>
> > Cr-Commit-Position: refs/heads/main@{#39340}
>
> No-Try: true
> Bug: webrtc:13931
> Change-Id: I791997ad9eff75c3ac9cd2e4bbacf5bc6c3a3a79
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/295663
> Commit-Queue: Harald Alvestrand <hta@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/main@{#39445}
Bug: webrtc:13931
Change-Id: I1318910a685188e2b846c9040e1efc04c2c894ac
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/296080
Reviewed-by: Tomas Gunnarsson <tommi@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39494}
This reverts commit 8981a6fac3d665beac4a58b9453e6c39988a024f.
Reason for revert: Quality regression detected.
Original change's description:
> Use two MediaChannels for 2 directions.
>
> This CL separates the two directions of MediaChannel into two separate objects that do not couple with each other.
>
> The notable API change is that receiver local SSRC now has to be set explicitly - before, it was done implicitly when the send-side MediaChannel had a stream added to it.
>
> Bug: webrtc:13931
> Change-Id: I83c2e3c8e79f89872d5adda1bc2899f7049748b3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288400
> Commit-Queue: Harald Alvestrand <hta@webrtc.org>
> Reviewed-by: Henrik Boström <hbos@webrtc.org>
> Cr-Commit-Position: refs/heads/main@{#39340}
No-Try: true
Bug: webrtc:13931
Change-Id: I791997ad9eff75c3ac9cd2e4bbacf5bc6c3a3a79
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/295663
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39445}
This reverts commit a087f6f1c842f1d70ad207b44c48321ab60d2d95.
Reason for revert: Needed to roll back other CL
Original change's description:
> Add plumbing for video NACK to be coupled between channels.
>
> Bug: webrtc:13931, webrtc:14920
> Change-Id: I451869e295e099a1d08c0c80e481decd53149f1b
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/294382
> Reviewed-by: Henrik Boström <hbos@webrtc.org>
> Commit-Queue: Harald Alvestrand <hta@webrtc.org>
> Cr-Commit-Position: refs/heads/main@{#39373}
Bug: webrtc:13931, webrtc:14920
Change-Id: I19e176e75630313da470542e7ff1e89b6d717fc9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/295664
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39432}
following the removal of ISAC from the code base.
BUG=webrtc:14450
Change-Id: I6faab5391bf0ef563c5dcce0bd5d8a653a87d9c8
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/294523
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Philipp Hancke <phancke@microsoft.com>
Cr-Commit-Position: refs/heads/main@{#39378}
Also update the tests that depend on FakeMediaEngine.
Bug: webrtc:13931
Change-Id: Ia608c4ce68a29e45174b68ba0103af31e9a7d3d1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/294280
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39345}
This CL separates the two directions of MediaChannel into two separate objects that do not couple with each other.
The notable API change is that receiver local SSRC now has to be set explicitly - before, it was done implicitly when the send-side MediaChannel had a stream added to it.
Bug: webrtc:13931
Change-Id: I83c2e3c8e79f89872d5adda1bc2899f7049748b3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288400
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39340}
This allows MediaChannel to know whether it's being used
for sending, receiving, or both. This is a preparatory CL
for landing the split of MediaChannel usage into sending and
receiving objects.
Bug: webrtc:13931
Change-Id: If518c8b53d5256771200a42e1b5f2b3321d26d8c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/292860
Reviewed-by: Florent Castelli <orphis@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39283}
This is done by allowing implementations of AudioDeviceModule to
implement the GetStats() method. The default implementation returns
nullopt, in which case RTCAudioPlayoutStats will not be visible in the
stats.
Bug: webrtc:14653
Change-Id: I8e4aa6f1b8fcfa47a30f633d28a4013191752e20
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/290563
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Fredrik Hernqvist <fhernqvist@google.com>
Reviewed-by: Henrik Andreassson <henrika@webrtc.org>
Reviewed-by: Olga Sharonova <olka@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39115}
With this cl, a packet is only parsed once in RtpTransport::DemuxPacket and the metadata is reused.
Extensions are still identified twice- one for demuxing based on mid. The second time in Channel::OnReceivedPacket in order to use extensions specific to that mid.
Bug: webrtc:7135, webrtc:14795
Change-Id: I50e3814af92ca4378f148876b20a54bcfac1e146
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/290540
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Per Kjellander <perkj@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39058}
This is a reland of commit 81aab488781c1a736c9d85ff1532631be2989523
See diff between Patch Set 1 and latest Patch Set.
The original CL broke this WPT[1] because getStats() with the receiver
as the selector stopped working in the event of unsignalled SSRCs due
to the receiver not knowing what the SSRC was.
This fix is to query media_channel_ for the unsignalled SSRC in the
event that the receiver does not know the SSRC.
[1] https://source.chromium.org/chromium/chromium/src/+/main:third_party/blink/web_tests/external/wpt/webrtc/simulcast/setParameters-active.https.html
Original change's description:
> Remove 'trackId' dependency in stats selector algorithm.
>
> In preparation for the deletion of deprecated 'track' stats, the
> stats selector algorithm needs to be rewritten not to use 'trackId'.
>
> This is achieved by finding RTP stats by their SSRC, as obtained via
> getParameters(). This unfortunately adds a block-invoke (in the sender
> case the block-invoke happens inside GetParametersInternal and in the
> receiver case the block-invoke is explicit at the calling place), but
> it can't be helped and it's just once per getStats() call and only if
> the selector argument is used.
>
> Bug: webrtc:14175
> Change-Id: If0e14cdbdc76d141e0042e43757970893bf32119
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/289101
> Reviewed-by: Harald Alvestrand <hta@webrtc.org>
> Commit-Queue: Henrik Boström <hbos@webrtc.org>
> Cr-Commit-Position: refs/heads/main@{#38981}
Bug: webrtc:14175, webrtc:14811
Change-Id: I0d16724af4efeb93d50e36dbfcc798564daff5c0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/290600
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#39010}
This is in preparation for splitting MediaChannel into sender and
receiver channels, with independent objects.
Bug: webrtc:13931
Change-Id: I8e34b0c80b4d76132394efcda658a8face3ab873
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288750
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38998}
This CL removes a couple more opportunities for client code
to interact directly with the MediaChannel implementation classes.
No-try because of infra failure.
No-Try: true
Bug: webrtc:13931
Change-Id: I658b8b04eff11de7831a1933d16d40fc59c3f0fc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288380
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38935}
This is a reland of commit d49d49ad89e67d1a3c63fbc638af445af5648875
Fixed seconds to milliseconds conversion in VideoAnalyzer.
Original change's description:
> Report total and squared inter frame delays measured in OnRenderedFrame
>
> After https://webrtc-review.googlesource.com/c/src/+/160042 we ended up with two sets of metrics representing total and total squared inter frame delays: old is measured in OnDecodedFrame and new in OnRenderedFrame. Reporting of old metrics was unshipped in https://webrtc-review.googlesource.com/c/src/+/278100. The metrics are used for calculation of harmonic frame rate and are desired to be measured as close as possible to rendering. This CL removes calculation of inter frame delay metrics from OnDecodedFrame and reports the metrics calculated in OnRenderedFrame to the stats.
>
> Bug: webrtc:11108, b/261512902
> Change-Id: Ia21b321aab3a1ac0b6136dc0df7d95f2f0fd24c6
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/286842
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Harald Alvestrand <hta@webrtc.org>
> Reviewed-by: Henrik Boström <hbos@webrtc.org>
> Cr-Commit-Position: refs/heads/main@{#38909}
Bug: webrtc:11108, webrtc:14792, b/261512902
Change-Id: Ic5d0bc4622ee0cb46b6c225cdddccc217200e794
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288641
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38929}
This reverts commit d49d49ad89e67d1a3c63fbc638af445af5648875.
Reason for revert:
# Check failed: total_freezes_duration_ms_double <= total_frames_duration_ms_double (196 vs. 0.044783)
https://ci.chromium.org/p/webrtc/builders/perf/Perf%20Mac%20M1%20Arm64%2012
it also breaks the metric 'freeze_duration_ratio':
https://chromeperf.appspot.com/report?sid=6e919d271ff5885c3fa6363dd255b9793d5e79332a9f202b725c33cc7d3da31a
Original change's description:
> Report total and squared inter frame delays measured in OnRenderedFrame
>
> After https://webrtc-review.googlesource.com/c/src/+/160042 we ended up with two sets of metrics representing total and total squared inter frame delays: old is measured in OnDecodedFrame and new in OnRenderedFrame. Reporting of old metrics was unshipped in https://webrtc-review.googlesource.com/c/src/+/278100. The metrics are used for calculation of harmonic frame rate and are desired to be measured as close as possible to rendering. This CL removes calculation of inter frame delay metrics from OnDecodedFrame and reports the metrics calculated in OnRenderedFrame to the stats.
>
> Bug: webrtc:11108, b/261512902
> Change-Id: Ia21b321aab3a1ac0b6136dc0df7d95f2f0fd24c6
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/286842
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Harald Alvestrand <hta@webrtc.org>
> Reviewed-by: Henrik Boström <hbos@webrtc.org>
> Cr-Commit-Position: refs/heads/main@{#38909}
Bug: webrtc:11108, b/261512902, webrtc:14789
Change-Id: Ie0da33c1071c48c50bff6608830c9e2a5a928fb4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288402
Commit-Queue: Jeremy Leconte <jleconte@google.com>
Bot-Commit: rubber-stamper@appspot.gserviceaccount.com <rubber-stamper@appspot.gserviceaccount.com>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38922}
After https://webrtc-review.googlesource.com/c/src/+/160042 we ended up with two sets of metrics representing total and total squared inter frame delays: old is measured in OnDecodedFrame and new in OnRenderedFrame. Reporting of old metrics was unshipped in https://webrtc-review.googlesource.com/c/src/+/278100. The metrics are used for calculation of harmonic frame rate and are desired to be measured as close as possible to rendering. This CL removes calculation of inter frame delay metrics from OnDecodedFrame and reports the metrics calculated in OnRenderedFrame to the stats.
Bug: webrtc:11108, b/261512902
Change-Id: Ia21b321aab3a1ac0b6136dc0df7d95f2f0fd24c6
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/286842
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38909}
This detaches the implementation (which is still merged)
from the objects used to interface to it.
Bug: webrtc:13931
Change-Id: I872ee10e4ed9fa432bfa231f723af1d3989d79d4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/288080
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38906}
The implementation here has a number of changes that force the callers
that called the "channel" functions into specific interfaces rather than
just letting C++ take care of it; this should go away once there stops
being a common implementation class for those interfaces.
Bug: webrtc:13931
Change-Id: Ic4e279528a341bc0a0e88d2e1e76c90bc43a1035
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/287640
Reviewed-by: Florent Castelli <orphis@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38888}
This is in the webrtc-stats spec at
https://www.w3.org/TR/webrtc-stats/#dom-rtcoutboundrtpstreamstats-scalabilitymode.
This adds the scalability mode to CodecSpecificInfo which is used to
plumb the modes for each simulcast layer.
TBR=orphis@webrtc.org
Tested: Compiled into Chrome and confirmed the scalability mode set for AV1, VP9, VP8 and H264 software encoders in chrome://webrtc-internals.
Bug: webrtc:14730
Change-Id: I71ceba8f6485a4f4a73e0856031b8d5f16f913f2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/285085
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38847}
This allows callers to differentiate on whether they need the
channel for sending or receiving purposes.
Note: This CL is incomplete, in that many places cast the pointers
to the concrete subclasses "VideoMediaChannel" and "AudioMediaChannel", which are not split into sending and receiving APIs.
The long term goal is to make two MediaChannel-like class APIs, with distinct implementations, and let the RtpSender and RtpReceiver manage those objects, rather than keeping them in the RtpTransceiver.
Bug: webrtc:13931
Change-Id: I8d56defe2287bd6552b71571cc6a5ec842927fa4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/287040
Reviewed-by: Tomas Gunnarsson <tommi@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38844}
As the synchronous version only posts a task to recreate the encoder
later, it is not possible to catch errors and state changes that
could appear then.
The asynchronous version of SetParameters() aims to solve this by
providing a callback to wait for the completion of the encoder
reconfiguration, allowing any error to be propagate and subsequent
getParameters() call to have up to date information.
Bug: webrtc:11607
Change-Id: I5548e75aa14a97f8d9c0c94df1e72e9cd40887b2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/278420
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Florent Castelli <orphis@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38627}
and do the resolution of rids to layers. This has no effect yet
since the simulcast encoder adapter (SimulcastEncoderAdapter::Encode), the VP8 encoder (LibvpxVp8Encoder::Encode) and the OpenH264 encoder (H264EncoderImpl::Encode) all generate a key frame for all layers whenever a key frame is requested on one layer.
BUG=chromium:1354101
Change-Id: I13f5f1bf136839a68942b0f6bf4f2d5890415250
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/280945
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Philipp Hancke <phancke@microsoft.com>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38565}
This information is now readily available. Let's expose it.
In practise we don't pace audio by default and the delay is ~0, however
we can tell that this metric is working as intended by setting
PacingController's pace_audio_ to true via the "WebRTC-Pacer-BlockAudio"
field trial. In this case chrome://webrtc-internals/ plots neats graphs
for audio send delay.
Bug: webrtc:10635
Change-Id: Iecfd93bb84ec61e5d54232769a9e7a500601b199
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/280523
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38483}
This metric was always supposed to be the spec's answer to
googBucketDelay, and is defined as "The total number of seconds that
packets have spent buffered locally before being transmitted onto the
network." But our implementation measured the time between capture and
send, including encode time. This is incorrect and yields a much larger
value than expected.
This CL updated the metric to do what the spec says. Implementation-wise
we measure the time between pushing and popping each packet from the
queue (in modules/pacing/prioritized_packet_queue.cc).
The spec says to increment the delay counter at the same time as we
increment the packet counter in order for the app to be able to do
"delta totalPacketSendDelay / delta packetSent". For this reason,
`total_packet_delay` is added to RtpPacketCounter. (Previously, the
two counters were incremented on different threads and observers.)
Running Google Meet on a good network, I could observe a 2-3 ms average
send delay per packet with this implementation compared to 20-30 ms
with the old implementation. See b/137014977#comment170 for comparison
with googBucketDelay which is a little bit different by design -
totalPacketSendDelay is clearly better than googBucketDelay.
Since none of this depend on the media kind, we can wire up this metric
for audio as well in a follow-up:
https://webrtc-review.googlesource.com/c/src/+/280523
Bug: webrtc:14593
Change-Id: If8fcd82fee74030d0923ee5df2c2aea2264600d4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/280443
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38480}
defined in
https://w3c.github.io/webrtc-encoded-transform/#rtcrtpsender-extension
Note: this does not implement the "rid(s)" parameter which will be done in a future CL.
VP8 still synchronizes keyframes on all layers even when asked for ones on individual layers while H264 (when implemented as three different encoders in SimulcastEncoderAdapter) can actually utilize this.
This does not change the behavior when receiving a RTCP PLI for a particular layer.
BUG=chromium:1354101
Change-Id: Ic8b14d155242e32c9aeafa55fe6652f346ac76b8
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/274169
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Philipp Hancke <phancke@microsoft.com>
Cr-Commit-Position: refs/heads/main@{#38472}
ScalabilityMode should be validated against the currently
allowed codecs or the currently used codec.
Bug: webrtc:11607
Change-Id: Id2e6cbfad4f089de450150e1203657ed316e2f29
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/277403
Commit-Queue: Florent Castelli <orphis@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38433}
This patch
1) modifies VideoAdapter to use requested_resolution
instead on OnOutputFormatRequest, iff there are no active encoders
that is not using requested_resolution (i.e all "old" encoder(s) are
not active).
2) modifies VideoBroadcaster to not broadcast wants from
encoders that are not active (iff there is an active encoder
using requested_resolution).
3) fixes a bug in encoder_stream_factor in that the
requested_resolution was not propagated to return value
(must have been lost in merge?).
Bug: webrtc:14451
Change-Id: I00e0907f0fe9329141ed169576fa46cdc5384886
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/278360
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Jonas Oreland <jonaso@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38323}
This cl move VideoEncoderConfig from api/ to video/config.
VideoStreamEncoderInterface and VideoStreamEncoderObserver
are moved as collateral.
brandt@ think that the reason these were in api/ in the
first place had to downstream project.
Functionality wise, this is a NOP, but it makes it easier
to modify the encoder (config).
Bug: webrtc:14451
Change-Id: I2610d815aeb186298498e7102cac773ecac8cd36
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/277002
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Jonas Oreland <jonaso@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#38242}
I am working on enabling AV1 profile-1 support for Chrome Remote
Desktop and I noticed that when our host adds both AV1 profile-0
and AV1 profile-1 codecs to the SDP, the second codec is stripped.
I tracked the problem down to this class as the IsSameCodecSpecific
function was not looking at the format params to determine whether
the additional AV1 codec entries were duplciates of the first.
Bug: chromium:1329660
Change-Id: I6ee0c264657203631a43f74f64e08153dca4f63a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/273981
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Joe Downing <joedow@google.com>
Cr-Commit-Position: refs/heads/main@{#38020}
follow-up from https://webrtc-review.googlesource.com/c/src/+/262810
* replace Time::Millis(0) and TimeDelta::Millis(0) with ::Zero()
* drop unnecessary webrtc namespace from some TimeDeltas
* make TimeDelta do the unit conversion for stats
BUG=webrtc:13756
Change-Id: Ic60625ae0fc7959a47a6be9f5051851feaf76373
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/265875
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#37664}
